Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Electric Gate Repair Across Nevada
Electric gate repair in Nevada, TX usually runs between $200 and $650, and in most cases we can have a technician at your property within 48 hours. Most of the gates we work on here aren’t HOA subdivision gates. They’re long driveway gates on acreage, often solar-powered, and they need a different kind of attention than what you’d get from a generalist shop in Rowlett or Plano. If your gate won’t open, won’t close, or keeps tripping its own safety eyes, call (877) 265-5743 and we’ll walk you through what’s likely happening before we even roll a truck.
Pinehurst Gate Repair has been out to Nevada enough times to know the roads, the soil, and what the heat does to a control board mounted on a metal post in full sun. We’re Electric Gate Repair specialists, not a fence company that also does gates. That matters when you’ve got a LiftMaster arm mid-cycle and a pasture full of horses waiting on the other side.
Why Pinehurst Gate Repair Is Nevada’s Preferred Electric Gate Repair Company
Nevada’s not a big town, but it’s spread out. That means when a gate fails on a property off FM 6 or out toward the Collin County line, the repair call usually comes with some urgency. We treat it that way. Our technicians work on gate systems exclusively, which means we aren’t squeezing your call between garage-door installs. We show up knowing what to look for on a Viking slide operator or a Ghost Controls swing arm instead of learning on your dime.
Ronnie Beshears has built this company around one idea: if we can’t diagnose your gate quickly and fix it right, we haven’t done our job. That’s the standard our Nevada customers hold us to, and we’ve kept it. We carry parts for the brands most common out here, which keeps turnaround short. You don’t have to wait a week for a control board to ship from Florida when we’ve already got it on the truck.
Local knowledge counts more on acreage properties than in town. We know that a gate on a multi-acre tract in Nevada often runs on solar, which changes how we diagnose everything from battery health to keypad fade. We know that clay soil shifts posts. We know that a thunderstorm can twist a tube-steel gate just enough to derail it. That’s why Nevada calls us first.
Styles & brands we work with
Commercial Gate Operator in Nevada
A commercial gate operator in Nevada handles heavier traffic, longer cycles, and harsher conditions than residential units, and they’re frequently found on ranch entries, small business yards, and shared private drives rather than storefront plazas. The work involves servicing the motor, gearing, limit switches, and safety loops, and it’s not a job for a generalist. We work on these units routinely, including DoorKing and Linear operators, and we stock the wear parts that fail most in this climate.
Heavy-Duty Swing and Slide Operators
Nevada’s agricultural traffic means gates cycle more often than a typical subdivision gate. A tube-steel farm gate on a slide track opening ten times a day puts real wear on the rack and pinion. When the track gets bent by wind or a truck bumper, the operator strains until the motor burns out. We replace the mechanical wear points, realign the track, and reprogram the limits so the operator isn’t fighting.
Running Power to Remote Operator Posts
On properties where the gate sits far from any structure, power delivery becomes part of the problem. We diagnose whether an operator is failing electrically or mechanically, including transformer and battery health on solar setups. If your operator needs a new transformer or a fresh set of deep-cycle batteries, that’s part of the repair quote, and you’ll approve the price before we start.
Gate Opener Repair in Nevada
Gate opener repair in Nevada is the most common call we get, usually because an opener that worked fine yesterday won’t respond today. When we arrive, we check the mechanical first, because a binding hinge or a sagging post kills openers faster than electrical faults. Then we move to the board, the motor capacitor, the remote receiver, and the safety sensors. Most repairs fall between $180 and $400 here, depending on what’s failed.
Solar Opener Electrical Diagnosis
Nevada has a lot of solar-powered gates, and they fail in predictable ways. A battery that’s five years old loses capacity in the heat. A charge controller with a dead display means the panel isn’t feeding the system. We test the panel output, battery voltage under load, and the controller logic before we sell anyone a new opener. Half the time, the fix is a $120 battery swap, not a $900 unit replacement.
Safety Sensor and Limit Issues
Clay soil is brutal on gate posts in the summer. As the ground dries, posts lean, and photo-eyes that were aligned in April are pointed at nothing by August. The opener then refuses to close, or worse, reverses mid-cycle. We correct the post alignment and set the sensors back to where they belong, then run a full entrapment test so the gate meets the safety standard it was installed with.
Trusted Brands We Service in Nevada
We work on the brand you already have. That includes LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Most Nevada properties we visit run Mighty Mule or Ghost Controls on residential swing gates and LiftMaster on heavier driveway slides, but we’ve seen everything. Carrying brand-specific diagnostic knowledge means we’re not guessing at a proprietary board pinout while your gate sits half-open. If we don’t have a part on the truck, we can usually source it same-week for 75173 without holding up the whole job.
See the difference
Before
After
Before
After
Before
AfterCommon Electric Gate Repair Problems We See in Nevada Homes
- Post shift from expansive clay. Nevada sits on clay that expands when wet and contracts in drought. That movement tilts gate posts and throws off safety beam alignment, which makes the opener refuse to open or close reliably. We fix the post, then the electronics.
- Solar system battery failure. UV and heat degrade batteries fast. A solar opener that works at noon but dies at 10 p.m. almost always has a weak battery or a failing charge controller, not a bad motor. We test the whole chain before recommending parts.
- Keypad housing cracks. Direct Texas sun eats plastic. Cracked keypad housings let moisture into the circuit board, causing intermittent beeping or no response at all. Replacement housings and sealed boards are quick fixes we do on a single visit.
- Slide track damage from storms. Nevada gets serious thunderstorms, and winds have enough force to bend a farm gate and pop it off the track. The rack gets misaligned, the chain jumps, and now the operator grinds. We straighten, shim, and re-seat the track, then adjust the operator’s limits to match the repaired gate.
Pricing for Electric Gate Repair in Nevada, TX
A simple opener repair in Nevada, like a new remote receiver or limit switch adjustment, typically runs $150 to $250. Solar battery replacement lands between $110 and $200. Control board failures on LiftMaster, FAAC, or BFT operators usually come in at $250 to $450 including diagnosis. Full operator replacement on a residential swing gate ranges from $700 to $1,300 in this market, depending on whether we’re also replacing the arm hardware. Slide operators on ranch entries run higher because the track work is heavier. Every repair gets a written quote before we turn a screw, and the price we quote is the price you approve.
We Also Serve Cities Near Nevada
Pinehurst Gate Repair handles Nevada and the surrounding area, including Lavon, Royse City, Fate, and Lowry Crossing. If you’re a few miles outside town on a county road, you’re still in our service range. Call (877) 265-5743 and we’ll confirm coverage over the phone.
Serving Nevada, TX — Our Local Coverage Area
We’re based in the Nevada area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Nevada
Yes, if your property sits within an HOA that governs architectural standards, you’ll need written approval before changing the gate’s style, height, finish, or automation method. A like-for-like repair of an existing operator doesn’t usually trigger review, but a full replacement with a different brand or a new gate panel will. We can handle the service side while you work through the approval, or we can provide spec sheets to submit with your request. Call (877) 265-5743 and we’ll help you figure out where your project falls.
Post shift. Nevada’s expansive clay swells and shrinks with moisture changes, and gate posts set in it slowly lean. That tilt moves the safety photo-eyes out of alignment, binds the hinges, and tricks the opener into thinking something is in the path. We see this more than motor burnout, board failure, or gear wear combined. The fix is stabilizing the post and re-aligning the safety system, not replacing the operator.
Yes, and we do it regularly. The most common failures are aged batteries that won’t hold a charge, degraded charge controllers, and UV-cracked keypad housings. We test panel output, battery capacity, and controller behavior before recommending any replacement parts, so you don’t pay for an opener you don’t need. Most solar repairs run $150 to $350 and take one visit.
We coordinate with you before we start. If animals are in a pasture served by the gate we’re fixing, we’ll ask you to move them to another pen or keep them in the barn during the repair window. On a ranch off County Road 1234, our tech diagnosed a LiftMaster swing gate operator that would open but not close because a thunderstorm had shifted the hinge post and knocked the photo-eyes out of line. The homeowner kept the horses in the barn while we corrected the sag and re-aligned the sensors, and the gate was back to operating that afternoon.
Check the entrapment protection first, meaning the photo-eyes and any contact edges along the gate’s travel path. With Nevada’s post-shifting clay and frequent storm damage, these sensors drift out of alignment and silently disable the safe-close function. Also check that the reversing mechanism actually reverses when the gate meets resistance. If your gate has a manual release key, test it once a season. For a full safety inspection, call (877) 265-5743 and we’ll send a tech to 75173 at no charge for the estimate.
Written by Ronnie Beshears, Owner at Pinehurst Gate Repair, serving Nevada, TX and the surrounding area.