Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Mesquite, TX
Gate installation in Mesquite usually means replacing a gate that’s been on the property since the Carter administration. Most homes here were built between the 1960s and early 1980s, and the original gates are either still hanging on or have been replaced once and are now failing again. We’re Pinehurst Gate Repair, and we’ve served Mesquite since 2013. We handle everything from re-hanging a sagging wood driveway gate to full automatic gate installation with new operators, photo eyes, and safety edges. Call (877) 265-5743 for a free estimate.
Why Mesquite Homes Are Different
Mesquite sits on North Texas black clay, and that clay moves. It swells after spring rain and shrinks during summer drought, which means gate posts heave, settle, and tilt. A gate that swings clean in April can drag the driveway by August because the post has moved a half inch. We see this pattern constantly in the older neighborhoods across 75149 and 75150, where the fencing and gates date back to the original build-out. The fix is often simpler than homeowners expect: reset the post in fresh concrete, re-plumb it, and re-hang the gate so it clears the ground again. No new gate needed.
The housing stock compounds the issue. North Texas heat bakes wood panels until they warp, and heavy spring storms push against already-weakened hinges and frames. Most Mesquite gates are wood picket or panel construction on steel or wood posts, and by the time we’re called, the hinges have pulled loose or the latch no longer lines up. The good news is that these are repairable problems in most cases. We’d rather re-hang and re-set than sell a replacement, and that’s the honest math we bring to every Mesquite job.
Styles & brands we work with
Our Main Mesquite Services
Most Mesquite homeowners call us for one of two reasons: a gate that won’t open or close properly, or an electric gate system that has stopped responding entirely. Here’s what each involves locally.
Gate Repair in Mesquite
Manual gate repair in Mesquite is mostly about aging hardware and shifting posts. Hinges seize, latch plates misalign, wood panels split around the screws, and steel frames rust through at the bottom rail. On a 1970s-era gate, all four problems can show up at once. We inspect the post set, the hinge hardware, the picket or panel condition, and the latch geometry, then tell you what actually needs work versus what still has years left. In many Mesquite cases, the right repair is a post re-set plus new hinges, and the gate itself stays. Read more on our dedicated Gate Repair in Mesquite page.
Electric Gate Repair in Mesquite
Electric gate failures are usually one of three things: a control board that’s lost its programming, a limit switch that’s out of adjustment, or a physical bind in the gate itself that’s overloading the operator. On Mesquite properties, the clay soil movement often creates that third problem, which then burns out motors and trips safety sensors. We diagnose the full system, from the operator to the loop detector to the safety edges, so you’re not replacing a board when the real issue is a dragging gate. See Electric Gate Repair in Mesquite for the full breakdown of how we approach automated systems.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Mesquite
Most gate installations in Mesquite are replacements, not first-time builds. The original gate from the 1970s or 1980s has been repaired once or twice, and now either the frame is rusted through or the wood is too far gone to hold hardware. In those cases, you’re not starting from scratch; you’re upgrading to something that will actually stand up to North Texas clay and heat. That could mean a steel frame with cedar infill, a full aluminum driveway gate, or an automated swing system with a new operator. We install manual and electric gates, swing and slide configurations, and everything in between. Whether you’re replacing a rotted wood gate in a 75149 backyard or building a new driveway entry from scratch, Gate Installation is the work we do every week in Mesquite.
Automatic Gate Installation
Signs you need it
You’re tired of getting out of the car to open the gate every time you come home, or you want controlled access for a driveway that currently has no gate at all.
What it costs in Mesquite
Automatic gate installation in Mesquite typically runs $3,000 to $9,000 depending on whether it’s a single swing or dual slide configuration and what operator brand you choose.
How we do it
We set the gate posts in concrete sized for the soil, mount the operator, run low-voltage power to the unit, install photo eyes and safety edges, and program the remote controls on site.
Driveway Gate Installation
Signs you need it
Your current driveway gate has sagged past the point of adjustment, the posts have shifted in the clay, or you’re ready to add a gate and operator where none existed before.
What it costs in Mesquite
Driveway gate installation in Mesquite usually falls between $4,000 and $12,000, with steel and aluminum options on the higher end and treated wood frames on the lower end.
How we do it
We measure the driveway width and slope, confirm the post locations, pour or re-pour the footings, then hang the gate and install the operator if one is part of the plan.
Sliding Gate Installation
Signs you need it
Your driveway doesn’t have room for a gate to swing inward or outward, or you have a long run that a slide gate would cover more cleanly.
What it costs in Mesquite
Sliding gate installation in Mesquite ranges from $3,500 to $10,000, with cantilever designs priced at the top end because they need no ground track to bind in clay.
How we do it
We set the track or cantilever posts, install the roller trucks and guide system, mount the operator, and test the full travel with the safety edges in place.
What Gate Installation Costs in Mesquite
| Item | Typical range in Mesquite |
|---|---|
| Manual wood driveway gate, single swing | $1,500 – $4,000 |
| Automatic single swing gate with operator | $3,500 – $7,000 |
| Sliding gate with operator, single track | $4,000 – $9,000 |
| Full automated dual swing driveway system | $6,000 – $14,000 |
Does a new gate in Mesquite need a permit?
Most residential gate replacements in Mesquite do not require a permit for like-for-like work, but adding a new driveway gate where none existed or changing the driveway approach may trigger review. We’ll tell you what your specific project needs before we start.
Can you match my existing fence style when installing a new gate?
Yes. We match the picket width, panel height, and stain or paint of your existing Mesquite fence so the new gate doesn’t look like an afterthought. Call (877) 265-5743 and we’ll match it.
Brands We Service in Mesquite
We work on the gate or operator you already have, not just the brands we sell. That includes FAAC and Linear operators, BFT hydraulic systems, and Viking swing and slide units, among others. We keep common control boards and limit switches on the truck for faster turnaround on Mesquite calls. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Mesquite, TX
| Service | Typical range in Mesquite |
|---|---|
| Manual gate repair, hinge and latch | $150 – $400 |
| Gate post re-set in concrete | $300 – $900 |
| Wood gate panel replacement | $250 – $800 |
| Electric gate diagnostic visit | $75 – $175 |
| Control board replacement | $350 – $1,200 |
| Operator motor replacement | $400 – $1,500 |
| Gate installation, manual single swing | $1,500 – $4,000 |
| Gate installation, automatic swing | $3,500 – $7,000 |
| Gate installation, sliding | $4,000 – $9,000 |
| Full automated dual swing system | $6,000 – $14,000 |
What pushes a Mesquite gate project higher is usually the post work. Clay soil means deeper footings and sometimes helical piers when a post keeps moving. We quote the full price before any work starts, and that’s the price you pay.
Neighborhoods We Serve in Mesquite
We cover all of Mesquite’s ZIP codes: 75150, 75181, 75185, and 75187. Our technicians are in the area most days, which keeps response times short for gate repairs.
- Skyline
- Casa View Heights
- Creek Crossing
- Palos Verdes
- Mesquite Park
Service Area – Cities Near Mesquite
We also handle gate work in the cities around Mesquite. The same clay soil and 1970s housing stock continues into Balch Springs, TX, Sunnyvale, TX, and Seagoville, TX, and we see the same gate issues there that we see in Mesquite. East of the lake, Forney, TX has newer construction but the same soil movement on gates and fences.
Serving Mesquite, TX — Our Local Coverage Area
We’re based in the Mesquite area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Mesquite
We schedule Mesquite gate repairs on the same call, and most jobs are completed within one to two business days depending on parts availability. Emergency calls are triaged first. Call (877) 265-5743 and we’ll get you on the schedule.
Some Mesquite neighborhoods with active HOAs have approved materials and height limits for driveway gates, especially in newer subdivisions. We’ll help you check the requirements before installing so you don’t get a violation notice.
Yes. We cover 75150, 75181, 75185, and 75187, along with the surrounding cities listed above. If you’re in Mesquite and have a gate problem, we can get to you.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Mesquite Customers Say
"Reprogrammed every clicker in the HOA and set up the keypad codes. Patient with a very long list of residents."
— Rami Hassan"Photo eye was misaligned so the gate refused to close after dark. Ten minute fix. He also cleaned the lens and pointed out that the sprinkler head was spraying it every morning, which is why it kept happening."
— Claudia Torres"Control board fried after a lightning storm. He showed me the burn mark on it, quoted the board, and installed a surge protector on the line so it hopefully doesn't happen again."
— Sofia Flores