Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Saint Paul, TX
Gate installation in Saint Paul, TX usually means one of two jobs: replacing a builder-grade gate that’s been sagging on settling clay for 15 years, or adding a new automated driveway gate to a home that never had one. Most of what we see in the 75098 ZIP sits in 1990s-to-2010s subdivisions where the original ornamental steel or vinyl gate hardware has simply worn out. Pinehurst Gate Repair has served Saint Paul since 2013, and we handle the full job: new gate, new posts, new operator, done as one project. Call (877) 265-5743 for a free estimate.
Why Saint Paul Homes Are Different
Saint Paul sits on dense North Texas black clay, and that soil is the single biggest factor in nearly every gate job we do here. The clay expands after spring rain and shrinks hard during summer drought, which means fence posts creep out of line, hinge sides settle, and a gate that latched fine in April will drag or pop its latch by August. That’s the classic Saint Paul complaint, and it’s why we don’t just swap hardware: we check post depth, re-square the frame, and set new posts in concrete below the frost line so the repair holds through the next dry season.
The housing stock compounds the issue. Homes in Wylie, Sachse, Murphy, Parker, and Saint Paul proper were mostly built between the 1990s and 2010s as brick-veneer tract homes on small-to-medium lots, and the original gates were installed as part of the subdivision build. Those builder-installed aluminum and ornamental steel gates used lighter hinges and thinner posts than custom work, so after a decade or two of North Texas heat, hail, and gusty north winds, they start to fail. The good news is that the framing and layout are generally solid, so a proper re-hang or a new gate installation often outlasts the original by years.
HOA rules are also part of working in Saint Paul. Many subdivisions here have design standards for fence and gate materials and finishes, and some require board approval before a new driveway gate or a visible material change. We’re familiar with the typical Collin County HOA review process and can usually tell you within the first conversation whether your project will need a quick submittal or is exempt under routine maintenance. That saves time and avoids a stop-work surprise mid-install.
Styles & brands we work with
Our Main Saint Paul Services
Most Saint Paul homeowners call us for one of two things: a gate that won’t open or close properly, or an electric operator that stopped responding. Both are covered below, and each has its own dedicated Saint Paul page with full details.
Gate Repair in Saint Paul
A sagging gate in Saint Paul is almost always a post or hinge problem first and a hardware problem second. The clay soil under your fence has moved, the hinge side has settled, and now the latch doesn’t line up. We re-hang and re-square gates on 1990s-through-2010s homes every week, replacing bent hinges, worn rollers, broken latches, and rotted or shifted posts as needed. Gate Repair in Saint Paul covers the full scope, from a simple hinge swap to a complete gate re-hang.
Electric Gate Repair in Saint Paul
When your LiftMaster or FAAC operator stops mid-cycle or a Viking control board loses power, the cause is usually something we can trace in under an hour. North Texas heat and hail are hard on outdoor circuit boards and limit switches, and gusty winds can knock sensors and safety edges out of alignment. We diagnose the electrical side and the mechanical side together, because an automated gate failure is often both at once. See Electric Gate Repair in Saint Paul for a full breakdown of operator, board, and safety-edge work in this area.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Saint Paul
Gate installation in Saint Paul is rarely a like-for-like swap. The original gate usually failed because the posts settled on clay and the builder chose lightweight hardware, so the right fix is a new gate on properly set posts with hardware sized for North Texas wind and soil movement. We also install automated driveway gates on homes that never had one, running the low-voltage power, safety edges, and operator so the gate works like it was part of the original build. Gate Installation is our core service, and every job is quoted with a written price before any work starts.
Automatic Gate Installation
Signs you need it
You’re done opening and closing a heavy driveway gate by hand, especially in summer heat or during spring storms, and you want push-button or remote access that always works.
What it costs in Saint Paul
Automatic gate installation in Saint Paul, including operator, safety edges, and control wiring, typically runs $4,800 – $11,500 depending on gate size and access needs.
How we do it
We set new posts, hang the gate, mount the operator and safety edges, run the low-voltage power, program remotes and keypads, and test the full cycle under load.
Driveway Gate Installation
Signs you need it
Your existing driveway gate is rusted through, sagging beyond safe repair, or your new home in a Wylie or St. Paul corridor subdivision has no gate at all.
What it costs in Saint Paul
A new driveway gate in Saint Paul, including steel or aluminum construction and posts set in concrete, runs $2,500 – $7,000 for a standard single or double gate.
How we do it
We measure the opening, fabricate the gate to the correct width and weight, set the posts below the frost line, and hang the gate with adjustable hinges that tolerate clay movement.
Sliding Gate Installation
Signs you need it
Your driveway slopes or curves at the entry and a swing gate would bind or block traffic, so a track-mounted sliding gate is the only clean option.
What it costs in Saint Paul
Sliding gate installation in Saint Paul, including track, rollers, and guide posts, typically runs $3,200 – $8,000 depending on length and operator integration.
How we do it
We set the track and end posts, install the sliding panel on sealed rollers, mount the operator if requested, and adjust the catch and travel limits.
What Gate Installation Costs in Saint Paul
| Item | Typical range in Saint Paul |
|---|---|
| Driveway gate installation | $2,500 – $7,000 |
| Sliding gate installation | $3,200 – $8,000 |
| Automatic gate installation (full system) | $4,800 – $11,500 |
How long does a new gate installation take in Saint Paul?
Most Saint Paul gate installations take one to two days on site, including post-setting, gate hanging, and operator wiring if automated. Custom fabrication adds lead time before the install date. We’ll give you a written schedule when we quote the job, and the price is set before any work begins.
Will new gate posts settle on my Saint Paul clay soil?
They won’t if they’re set properly. We dig below the frost line and set each post in concrete, which prevents the seasonal shrink-and-swell cycle from shifting them. That’s the single biggest difference between a gateway we install and the builder-original one it replaces. Call (877) 265-5743 for a free site assessment.
Brands We Service in Saint Paul
We work on the brand you already have. Our techs carry parts and wiring for Linear, Viking, Ghost Controls, and DoorKing systems, among others, and we stock common control boards and remote receivers locally so most Saint Paul repairs don’t wait on parts. Our brands page lists the full lineup and what we keep on hand.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Saint Paul, TX
| Service | Typical range in Saint Paul |
|---|---|
| Gate repair (general) | $180 – $340 |
| Gate re-hang / re-square | $275 – $450 |
| Post replacement (steel or wood, set in concrete) | $400 – $900 |
| Operator / motor replacement (electric gate) | $650 – $1,200 |
| Electric gate control board replacement | $300 – $600 |
| Safety sensor / photo-eye replacement | $150 – $300 |
| Driveway gate installation | $2,500 – $7,000 |
| Sliding gate installation | $3,200 – $8,000 |
| Automatic gate installation (full system) | $4,800 – $11,500 |
What pushes a Saint Paul job higher is usually the post work: when the clay has shifted a post out of square, fixing the gate means fixing the post, and that adds the cost of excavation and new concrete. The second driver is automation, since adding an operator, safety edges, and low-voltage wiring to a previously manual gate involves electrical work that some older Saint Paul homes weren’t prepared for. Whatever the scope, your price is quoted and agreed before any work starts, and it doesn’t change unless you add to the job.
Neighborhoods We Serve in Saint Paul
We cover all of the 75098 ZIP and the surrounding Wylie and St. Paul corridor subdivisions. Our techs are typically in the area within one business day for most non-emergency calls, and we schedule installations around your HOA’s review calendar.
- Trails of St. Paul
- St. Paul Legacy Park area
- Wylie ISD subdivisions along FM 2514
- Parker Road corridor homes
- Ballard Street and surrounding streets
Service Area – Cities Near Saint Paul
Our Saint Paul crew also covers the surrounding Collin County communities. We serve Wylie, TX and Sachse, TX directly, including the older subdivisions that share the same clay-soil gate issues you have. We also regularly work in Murphy, TX and Parker, TX, where the housing stock and HOA requirements are much the same. If you’re on the edge of one of these cities, your job probably falls in our normal service area.
Serving Saint Paul, TX — Our Local Coverage Area
We’re based in the Saint Paul area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Saint Paul
Most gate repairs and like-for-like replacements don’t require a city permit in Saint Paul, but new driveway gate installations and some automation projects do fall under Collin County or city-level review. Many HOAs also require design approval for visible changes. We’ll tell you what applies to your street before work begins, and we handle the paperwork where needed.
For non-emergency gate repair and most installation estimates, we’re usually in Saint Paul within one business day. If your gate is stuck open or failed closed and you can’t secure the property, call (877) 265-5743 and we’ll make it a priority. Same-week scheduling is common for quote visits and standard repairs.
Yes, and that’s the most common job we do in Saint Paul. We re-hang the gate, replace the original lightweight hinges with heavier duty hardware, and re-set or replace any post that has settled. The result is a gate that opens and latches cleanly through the next drought cycle instead of dragging every August.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Saint Paul Customers Say
"Control board fried after a lightning storm. He showed me the burn mark on it, quoted the board, and installed a surge protector on the line so it hopefully doesn't happen again."
— Sofia Flores"Gate stopped halfway and sat there for two days blocking the driveway. He found a dead capacitor in the operator, had one with him, and we were moving cars again in under an hour."
— Heather Rhodes"Solar panel on our remote gate wasn't keeping the battery up through the winter. He repositioned it, replaced the battery, and explained the math on why the old placement was never going to work."
— Diego Reyes