Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Rockwall, TX
Gate installation in Rockwall usually means a decorative steel or aluminum driveway gate on a post-2000 brick-and-stone home, frequently paired with an automatic opener. Most Rockwall gates we install are ornamental metal, and the two ZIP codes we cover, 75032 and 75087, span everything from lakefront estates to master-planned subdivisions on the ridge. The work here isn’t restoring old wood gates. It’s sizing new metal gates for wide driveway openings, setting posts deep enough to handle North Texas clay, and wiring operators so they hold up to lake wind. Call Pinehurst Gate Repair at (877) 265-5743 for a free estimate on any gate project in Rockwall.
Why Rockwall Homes Are Different
Rockwall sits on the east shore of Lake Ray Hubbard, and that location changes gate work in ways you won’t see in flatter Dallas suburbs. The 75032 and 75087 ZIPs mix waterfront custom homes with newer master-planned communities on the ridge above the lake. Most homes were built after 2000, so the typical gate is a newer decorative metal driveway gate, a pool gate, or a perimeter gate with a powered operator, not an aging wood or wrought-iron structure.
Two local forces do most of the damage here. The first is expansive black clay soil. It swells when wet and shrinks in drought, so gate posts heave and settle seasonally. A gate that swung cleanly in March may bind by August because the post has moved a quarter inch. The second is wind. On the lake side of town, waterfront lots take the full brunt of straight-line winds off Lake Ray Hubbard. Gate frames flex, operator arms strain, and hinges wear faster than they do a few miles inland on the ridge. North Texas heat and spring storms add their own stress to control boards and sensors. Every gate we work on in Rockwall has to be built for clay soil movement and wind exposure, not just the weight of the gate leaf.
Styles & brands we work with
Our Main Rockwall Services
Two calls dominate our Rockwall work: a gate that won’t open or close properly, and an electric operator that has stopped responding. Each has its own dedicated Rockwall page with full pricing and details.
Gate Repair in Rockwall
Manual gate repair in Rockwall typically means a sagging or binding gate on a post-2000 home where the clay soil has shifted a post or a hinge has worn under lake wind. We straighten posts, replace hinges, realign latch hardware, and get the gate swinging the way it should. On decorative metal driveway gates, the problem is often a bent frame from wind stress or a post that settled after spring rains. We diagnose the mechanical issue directly rather than guessing, and we carry the hardware to fix most gates in one visit. See Gate Repair in Rockwall for pricing and what a typical repair involves.
Electric Gate Repair in Rockwall
Electric gate repair in Rockwall usually begins with a homeowner telling us the gate stopped mid-cycle, the remote quit working, or the opener hums but won’t move. We work through the full low-voltage system: control board, safety sensors, keypads, remotes, limit switches, and the operator arm or motor. Rockwall’s lake wind and clay soil strain the mechanical side of automatic operators, but the electrical diagnosis matters just as much. Whether your opener is a Linear, Viking, BFT, or FAAC, we read the board and the wiring before recommending any replacement. See Electric Gate Repair in Rockwall for full coverage and brand-specific details.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Rockwall
A new gate in Rockwall is a long-term fixture. Most homes here are post-2000 brick-and-stone construction, so the gate that matches the house is decorative metal: ornamental iron, aluminum, or steel, sized for a wide driveway and built to take lake wind on the waterfront side of town. We install the gate and, when you want it automated, the operator as part of the same job. Pinehurst Gate Repair handles Gate Installation from the first measurement through the final swing test, including low-voltage wiring for automatic openers.
Automatic Gate Installation
Signs you need it
You’re adding a powered operator to a new or existing gate, or you’re tired of opening a heavy driveway gate by hand and want a keypad or remote.
What it costs in Rockwall
Automatic gate installation in Rockwall typically runs $1,500 to $3,500 for a single swing gate with a new operator, including basic low-voltage wiring.
How we do it
We measure the gate leaf and opening, set or verify the posts, mount the operator arm and bracket, pull the low-voltage power run, install the control board and safety edges, and program remotes and keypads before testing a full open-close cycle under load.
Driveway Gate Installation
Signs you need it
You’re building or renovating in Rockwall and want a secure, finished entry, or the existing driveway gate is damaged beyond the point where repair makes sense.
What it costs in Rockwall
Driveway gate installation in Rockwall typically runs $3,500 to $8,000 for a decorative steel or aluminum double gate with hardware, not including an automatic operator.
How we do it
We survey the driveway opening and slope, order or fabricate the gate to size, set posts deep enough to anchor against clay movement, hang the gate, and adjust the hardware so it swings true and latches cleanly.
Sliding Gate Installation
Signs you need it
Your driveway has a slope or limited swing clearance, and a cantilever or track slide gate fits the opening better than a swing gate.
What it costs in Rockwall
Sliding gate installation in Rockwall typically runs $4,000 to $10,000 depending on gate length, track or cantilever hardware, and whether an operator is included.
How we do it
We lay out the track or cantilever rollers, pour or anchor the foundation, set the gate frame, install the roller trucks and guides, and adjust travel so the gate slides without binding through the full opening.
What Gate Installation Costs in Rockwall
| Item | Typical range in Rockwall |
|---|---|
| Automatic gate installation (single swing, new operator) | $1,500 – $3,500 |
| Driveway gate installation (steel or aluminum double gate) | $3,500 – $8,000 |
| Sliding gate installation | $4,000 – $10,000 |
How much does a new gate cost in Rockwall?
A standard decorative steel or aluminum driveway gate in Rockwall runs $3,500 to $8,000 installed, and an automatic swing gate with a new operator starts around $1,500 to $3,500. Driveway width, double versus single leaf, and whether you want an operator all move the number. Call (877) 265-5743 for a quote on your exact opening.
Do you handle the electrical for a new automatic gate?
Yes. When we install an automatic gate in Rockwall, we run the low-voltage power, mount the operator, install the control board and safety edges, and program the remotes and keypads as part of the same job. You’re not coordinating a separate electrician. Call (877) 265-5743 to schedule a site measure.
Brands We Service in Rockwall
We work on the gate operator brand you already have. Our technicians carry boards, arms, sensors, and remotes for Linear, Viking, BFT, and FAAC systems, among others, so most Rockwall repairs don’t wait on parts. We stock common components locally and diagnose brand-specific board failures rather than swapping parts on a guess. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Rockwall, TX
| Service | Typical range in Rockwall |
|---|---|
| Gate repair diagnostic (service call) | $75 – $150 |
| Hinge replacement (per pair) | $150 – $350 |
| Gate post reset or straighten | $300 – $700 |
| Automatic gate opener repair (control board, arm, or motor) | $250 – $800 |
| Automatic gate installation (single swing, new operator) | $1,500 – $3,500 |
| Driveway gate installation (steel or aluminum double gate) | $3,500 – $8,000 |
| Sliding gate installation | $4,000 – $10,000 |
| Safety sensor or photo eye replacement | $175 – $400 |
| Keypad or remote programming | $100 – $250 |
What pushes a Rockwall gate price up is usually soil work: a post set deep enough to hold through clay expansion and lake wind costs more than a shallow post on stable ground. Every price we quote is agreed in writing before any work starts, so the number you approve is the number you pay.
Neighborhoods We Serve in Rockwall
We cover all of Rockwall’s 75032 and 75087 ZIPs, including the master-planned communities on the ridge and the waterfront streets along Lake Ray Hubbard. Same-day service is usually available for gate failures in Rockwall proper.
- The Shores on Lake Ray Hubbard
- Chandlers Landing
- Lakeside Village
- Castle Ridge
- Heath Golf and Yacht Club vicinity
Service Area – Cities Near Rockwall
Pinehurst Gate Repair serves Rockwall and the surrounding cities daily. If your gate is in Heath, TX, McLendon-Chisholm, TX, Fate, TX, or Royse City, TX, you’re inside our normal service area and we’ll schedule the same way we do in Rockwall. Call (877) 265-5743 and we’ll confirm a visit time.
Serving Rockwall, TX — Our Local Coverage Area
We’re based in the Rockwall area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Rockwall
For a gate that won’t close or won’t secure, we can usually reach most Rockwall addresses the same day, and we schedule routine repairs within a few days. The 75032 and 75087 ZIPs are both inside our standard service area. Call (877) 265-5743 and we’ll give you a window, not an open-ended wait.
Many Rockwall communities have architectural guidelines for driveway gates, so check your HOA’s design standards before we order materials. We can provide spec sheets and material details for your submission, and we’ll build to whatever style and height your HOA approves. The gate itself is the easy part; the paperwork is just a step.
Yes. We diagnose the mechanical side and the low-voltage electrical side in the same visit, because in Rockwall the two usually fail together, one binds and overloads the other. Call (877) 265-5743 to schedule a repair or a free installation estimate.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Rockwall Customers Say
"Hinge post had rotted at the base and the whole swing gate was sagging into the concrete. He rebuilt the post rather than talking us into a whole new gate, which two other companies had pushed for."
— Renee Hayes"Reprogrammed every clicker in the HOA and set up the keypad codes. Patient with a very long list of residents."
— Rami Hassan"Photo eye was misaligned so the gate refused to close after dark. Ten minute fix. He also cleaned the lens and pointed out that the sprinkler head was spraying it every morning, which is why it kept happening."
— Claudia Torres