Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Richardson, TX
Gate installation in Richardson means working with two very different properties: 1960s ranch homes in 75080 and 75081 where driveway gates were built alongside the house, and newer master-planned subdivisions in 75082 where automatic gate systems were added decades later. We’re Pinehurst Gate Repair, and we’ve served Richardson since 2013. The clay soil here moves more than almost anywhere in Dallas County, which means a gate post that was plumb five years ago may not be today. Call (877) 265-5743 when you need a gate company that understands Richardson’s specific conditions.
Why Richardson Homes Are Different
Richardson’s residential core was built fast in the 1960s and 70s, and the original driveway gates reflect that era: wrought-iron on concrete footings, chain-link on steel posts, almost all of it manual. The soil underneath those gates is expansive clay that shrinks in August and swells in April. Over fifty years, that cycle pushes posts out of alignment by inches, not fractions of an inch. A gate that dragged slightly in 1990 now scrapes hard enough to bend the hinge pins. In neighborhoods like Richardson Heights and Highland Terrace, we regularly find posts that have heaved so far out of plumb that re-setting them in fresh concrete is the only repair that will hold.
The newer side of Richardson, especially the 75082 ZIP near Renner Road, has a different profile. Those homes got decorative steel and automatic driveway gates in the 1990s and 2000s. The gates themselves are usually in decent shape, but the electronics take a beating from North Texas summers. Control boards mounted in metal boxes against a south-facing brick wall can hit 140 degrees in July, and capacitor failures follow. Then there’s the Telecom Corridor: 1980s office parks along US-75 and Central Expressway with perimeter security gates that have been cycling thousands of times a year for decades. Those are commercial-grade slide operators, and they fail differently than anything in a residential neighborhood.
Styles & brands we work with
Our Main Richardson Services
Most calls we get from Richardson fall into two categories: a gate that physically won’t move, or an electric gate whose operator has stopped responding. Here’s what each involves in this city.
Gate Repair in Richardson
Richardson’s older gates fail at the hardware level first. Hinges rust through, posts shift in clay soil, and wrought-iron gates from the 1960s develop stress cracks where the pickets meet the frame. A repair often means cutting out the old hinge, welding in a new one, and re-setting the post in concrete so the gate hangs true again. In newer 75082 neighborhoods, the mechanical failures are more likely to be roller trucks wearing out on sliding gates or cantilever hardware loosening over time. Whether it’s manual or automatic, the mechanical side has to be right before anything else will work. Gate Repair in Richardson covers the full scope of this work.
Electric Gate Repair in Richardson
Electric gates in Richardson deal with two recurring problems: heat stress on control boards and power surges from spring thunderstorms. A LiftMaster or FAAC operator that’s been running fine for years can simply stop one afternoon when a capacitor gives out in the heat. Older systems in 75080 and 75081 often have wiring that was run decades ago and has degraded in the clay soil. We trace the low-voltage circuit, test the board, and replace only what’s actually failed. For automated gates that won’t open, close, or respond to remotes, Electric Gate Repair in Richardson details what’s involved.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Richardson
New gate installation in Richardson usually happens because an original 1960s gate has reached the end of its life, or because a homeowner in a newer subdivision wants to add a driveway gate where none existed. The clay soil dictates how we set posts here: deeper footings, more concrete, and a longer cure time than you’d need in sandy soil. A gate installed without accounting for Richardson’s soil movement will drift out of alignment within two or three years. We also handle power runs for automatic gates, which in older Richardson neighborhoods often means trenching across a yard that’s never had low-voltage wiring. Whatever the scope, our Gate Installation work starts with a free measure and a written quote.
Automatic Gate Installation
Signs you need it
Your existing manual gate is heavy enough that opening it by hand is a daily chore, or you want controlled access to your driveway for security reasons.
What it costs in Richardson
Automatic gate installation in Richardson typically runs $2,800 to $7,500 depending on the operator type, gate size, and whether we’re running new low-voltage power.
How we do it
We set the posts with concrete footings sized for clay soil, hang and align the gate, install the operator and safety edges, run and connect low-voltage power, and program all remotes and keypads before we leave.
Driveway Gate Installation
Signs you need it
Your property has no gate at all, or the existing gate is so deteriorated that patching it would cost more than a properly built replacement.
What it costs in Richardson
A new manual driveway gate in Richardson typically falls between $1,200 and $3,800 for materials and installation depending on width and material.
How we do it
We measure the opening, confirm swing or slide orientation with you, dig and pour footings, set the posts, hang the gate, and adjust the hardware until it swings true top to bottom.
What Gate Installation Costs in Richardson
| Item | Typical range in Richardson |
|---|---|
| Manual driveway gate (single swing) | $1,200 – $3,800 |
| Automatic gate system (operator + gate) | $2,800 – $7,500 |
| Slide gate assembly | $2,500 – $6,200 |
Prices in Richardson move up when we’re working with 1960s-era post footings that have to be dug out and re-poured, or when the power run crosses a long front yard. Every job is quoted in writing before any work starts, so the number you approve is the number you pay.
Do I need an HOA approval before installing a gate in Richardson?
Many Richardson HOAs, especially in 75082 subdivisions, require design review before a driveway gate goes in. We can provide drawings and specs for your submission, but approval runs through your HOA.
Can you install a gate on a Richardson home with no existing power at the driveway?
Yes. We trench and run low-voltage wiring from your panel to the gate location, which is common in older 75080 and 75081 homes built before automatic gates were typical.
Brands We Service in Richardson
We work on the brand you already have. That includes FAAC and BFT hydraulic operators common on Richardson’s heavier commercial slide gates, plus Linear and Viking units found on many residential driveway systems. Our techs carry the common boards, remotes, and safety edges for these brands, which keeps most repairs to a single visit. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Richardson, TX
| Service | Typical range in Richardson |
|---|---|
| Gate repair – hinge replacement | $180 – $420 |
| Gate repair – post reset in concrete | $350 – $800 |
| Gate repair – full gate realignment | $220 – $500 |
| Electric gate repair – control board replacement | $300 – $900 |
| Electric gate repair – operator motor swap | $400 – $1,100 |
| Electric gate repair – sensor/photo eye replacement | $180 – $420 |
| Gate installation – manual driveway gate | $1,200 – $3,800 |
| Gate installation – automatic system | $2,800 – $7,500 |
| Gate installation – slide gate assembly | $2,500 – $6,200 |
Two things push gate pricing up in Richardson more than anywhere else nearby: clay-soil post resets and the heat-related electronics failures that are just part of a North Texas summer. Whatever the job, you get a written quote before we start, and that price doesn’t change unless you approve a change.
Neighborhoods We Serve in Richardson
We work across all four Richardson ZIP codes, from the ranch homes of 75080 and 75081 to the newer developments in 75082 and the mixed residential-commercial areas of 75085. That includes:
- Richardson Heights
- Highland Terrace
- Canyon Creek
- Cottonwood Heights
- Breckinridge Point
Response across Richardson runs faster than our wider metro schedule because we keep a local rotation of techs staged for North Dallas County. Emergency repair calls in Richardson can usually be seen the same day.
Service Area – Cities Near Richardson
Our Richardson work puts us in the field across North Dallas County most days, so we also cover University Park, TX, Highland Park, TX, Garland, TX, and Dallas, TX. If you’re just outside Richardson, call and we’ll tell you straight whether we can get to you this week.
Serving Richardson, TX — Our Local Coverage Area
We’re based in the Richardson area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Richardson
Most Richardson repair calls are scheduled same-day or next-day. We stage technicians in North Dallas County during the week, which shortens drive time to 75080, 75081, 75082, and 75085 compared to companies running out of Fort Worth or South Dallas.
Some do, particularly the newer subdivisions in 75082 where architectural standards were written into the original covenants. We’ve installed gates across most of Richardson’s HOAs and can usually tell you what will pass review. Final approval is between you and your HOA or management company.
Yes, manual and electric, swing and slide. A lot of Richardson homeowners call us for a mechanical repair on an old wrought-iron gate and end up asking about automating it. Since we do both, it’s one call and one crew either way. Call (877) 265-5743 for a free estimate.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Richardson Customers Say
"Gate stopped halfway and sat there for two days blocking the driveway. He found a dead capacitor in the operator, had one with him, and we were moving cars again in under an hour."
— Heather Rhodes"Solar panel on our remote gate wasn't keeping the battery up through the winter. He repositioned it, replaced the battery, and explained the math on why the old placement was never going to work."
— Diego Reyes"Fixed the immediate problem. He was honest that the operator is near end of life and I should budget for a replacement, which I appreciate even if it wasn't what I wanted to hear."
— Marco Rodriguez