Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Electric Gate Repair Across Plano
Electric gate repair in Plano usually means one of three things: a builder-grade operator that was never really right for the gate, a manual gate that got automation added years later without proper footings or conduit, or a gate that North Texas clay soil has slowly pulled out of alignment. Most Plano repairs run $180 – $480 for common fixes like limit switch adjustment, keypad replacement, or hinge re-alignment. Full operator or control board replacement typically lands between $650 and $1,600 depending on the brand and gate size. Call Pinehurst Gate Repair at (877) 265-5743 and we’ll diagnose it over the phone before we ever roll a truck.
We work Plano neighborhoods from 75093 and 75024 in the west to 75023 and 75094 on the north side every week. Our techs know the difference between a Willow Bend iron gate and a Hidden Cove builder-spec cedar gate without asking for the HOA packet. That matters when the fix has to match what the architectural review committee already approved.
Why Pinehurst Gate Repair Is Plano’s Preferred Electric Gate Repair Company
Gate specialists, not generalists. That’s the whole model. We don’t run garage door calls in the morning and gate calls in the afternoon. Every diagnostic, every repair, every installation we do is on a gate system, whether it’s a manual swing gate in an older 75023 home or a commercial slide operator on a Plano business park entrance. That focus shows up in how fast we identify problems on LiftMaster, Linear, DoorKing, Ghost Controls, and the rest.
Ronnie Beshears built this company around one idea: the brand you already have is the brand we fix. Plano homeowners with a builder-installed Viking operator don’t need to hear that their system is “too proprietary” or that they should replace it with whatever we happen to sell. We stock boards, remotes, keypads, arms, and safety edges for the operators actually installed across Plano subdivisions, so we’re not waiting on a distributor in Dallas to get your gate moving again.
Local knowledge cuts the diagnostic time in half. We already know that a gate in 75074 that binds every August is probably dealing with post heave from expansive clay, not a bad motor. We know that a 75093 home with an HOA that mandates dark bronze iron work needs repairs that match that exact finish, not whatever’s on the shelf. That’s the kind of context that turns a two-hour mystery into a forty-five minute fix.
Styles & brands we work with
Gate Access Control in Plano
Gate Access Control in Plano covers the electronics that decide who gets in: keypads, card readers, intercom systems, vehicle detection loops, and the wiring that ties them to the operator. In Plano’s HOA-heavy subdivisions, we see a lot of gated communities where the original access system was installed in the mid-2000s and is now failing intermittently. A keypad that works fine at noon but rejects codes at 6 a.m. is usually a ground fault or a failing relay, not a programming error. Access control repair in Plano typically runs $150 – $350 for keypad or loop issues, while a full reader-to-operator integration or replacement intercom panel lands in the $800 – $1,400 range.
Keypad and Intercom Diagnostics
Wireless keypads in Plano’s newer subdivisions fail most often from battery corrosion and sun exposure on south-facing pillars. Wired systems, especially in commercial and HOA entrances, suffer from lightning strikes and degraded underground splices. We test the full circuit before replacing parts, so you’re not paying for a new keypad when the problem is a corroded connection fifteen feet away.
Vehicle Detection and Safety Loops
Loop detectors buried in Plano driveways fail slowly: the gate starts closing on cars, then stops detecting altogether. That’s a safety issue, not a convenience issue. We locate the loop, cut and re-pull new wire, and re-seal the saw cut so the next Plano freeze-thaw cycle doesn’t finish the job. Most loop repairs run $250 – $450 depending on driveway length and loop configuration.
Commercial Gate Operator in Plano
Commercial Gate Operator work in Plano means slide operators on office park entrances, swing operators on apartment and townhome communities, and the occasional vertical pivot gate at an industrial facility off 75 or the Bush Turnpike corridor. These operators cycle hundreds of times a day and fail differently than residential units: motor capacitors burn out, limit switches drift, and chain slack accumulates until the gate slams at the end of travel. A commercial operator repair in Plano typically runs $350 – $700 for common failures like limit switch replacement, chain tensioning, or capacitor swaps. Full operator replacement on a heavy slide gate usually starts around $1,800 and can exceed $4,000 for high-cycle, UL 325-compliant systems that HOA management companies require.
Slide Gate Chain and Track Service
Slide gates in Plano commercial lots collect gravel, mulch, and clay dust in the track and chain. We remove the debris, adjust chain tension, and lubricate rollers with the right grease for North Texas summers. A gate that grinds and jerks is usually a $200 – $350 track and chain service, not a $2,500 operator replacement. We’ll tell you which one you actually need.
Operator Replacement for High-Traffic Entrances
When a Plano commercial gate has outlived its operator, we match the replacement to the duty cycle, not just the gate width. A DoorKing or BFT slide operator sized for a 40-foot iron gate at a 300-unit apartment complex is different from one sized for a 20-foot aluminum gate at a 12-unit office park. We spec it correctly so the property manager isn’t calling again in eighteen months.
Trusted Brands We Service in Plano
We work on the brand you already have. In Plano that means a lot of Linear operators on builder-installed swing gates, Ghost Controls kits that homeowners added themselves, Viking operators on older estate properties, and DoorKing units on commercial and HOA entrances. We keep common Plano parts in the truck: Linear limit switch assemblies, DoorKing loop detectors, Ghost Controls remote receivers, Viking control boards. When a part isn’t on the truck, our Rowlett shop stocks deeper inventory, which means most Plano repairs don’t wait on a ground shipment from a national distributor.
See the difference
Before
After
Before
After
Before
AfterCommon Electric Gate Repair Problems We See in Plano Homes
- Post heave from Blackland Prairie clay. Gates in 75023 and 75074 especially sit on soil that swells and shrinks with every wet-dry cycle. The hinge post moves, the gate sags, and the operator arm geometry throws off, so the gate reverses mid-travel. A hinge swap won’t fix this; the post has to be reset deeper or re-shimmed.
- Builder-grade operators failing early. In 75093 and 75024, the original gate often started life as a manual gate. An operator was bolted on later without deeper footings or a proper power run. The motor fights a post that was never engineered for its torque, and it burns out in three to five years instead of ten to fifteen.
- Undersized conduit and voltage drop. We see 24V circuits run through 14-gauge wire over 100+ feet from the house to the gate. The operator gets 18 or 19 volts under load and starts faulting. The fix is rerunning proper conduit and wire, not replacing the operator, which is why some Plano gates eat a new control board every year.
- HOA compliance on visible repairs. A sagging cedar gate in an HOA-governed west Plano subdivision can’t be replaced with a different board profile or finish without triggering a violation. We match the original builder hardware and stain so the repair doesn’t become a letter from the management company.
Pricing for Electric Gate Repair in Plano, TX
Here’s what Plano homeowners and property managers actually pay. A standard service call with diagnosis runs $75 – $95, and that’s credited toward the repair if you approve the work. Keypad replacement: $120 – $260 installed. Remote control programming: $45 – $90. Safety sensor replacement: $140 – $280. Control board replacement on a residential operator: $250 – $600 parts and labor. Motor replacement: $350 – $750. Full operator replacement on a residential swing or slide gate: $900 – $2,200 depending on brand, gate weight, and whether new conduit or a deeper post has to go in. HOA and commercial slide gate work runs higher, typically $1,800 – $4,500 for a complete operator swap. We quote the price upfront, before any work starts, and you approve the number first. Call (877) 265-5743 for an exact quote on your gate.
We Also Serve Cities Near Plano
Our Plano coverage extends into the surrounding North Texas communities. We handle Electric Gate Repair calls in Lucas, Allen, Murphy, and Parker regularly, with the same multi-brand parts inventory and the same gate-specialist team. If you’re just outside Plano’s city limits, call and we’ll let you know the soonest we can get a tech to your property. See our dedicated Electric Gate Repair in Plano page for neighborhood-specific details on this side of Collin County.
Serving Plano, TX — Our Local Coverage Area
We’re based in the Plano area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Plano
Repairs that preserve the original gate’s profile, material, and finish generally don’t require new architectural review approval. What triggers a violation is changing the gate’s look: a different board pattern, a different stain color, a different iron finish, or swapping a cedar gate for a steel one without submitting plans. We stock common Plano builder hardware, including LiftMaster and Linear operators and matching cedar board profiles, so the repair restores what was originally approved. If the HOA does require documentation, we can provide a written scope of work describing the repair as like-for-like. Call (877) 265-5743 and we’ll walk through what your specific HOA packet says.
In Plano, the usual cause is post heave from expansive clay soil, not a faulty motor. When the hinge post shifts, the operator arm’s geometry changes and the gate binds, which the operator reads as an obstruction, so it reverses. A secondary cause in newer subdivisions is voltage drop from undersized wire run to the gate. We check both before recommending any parts. Most of these repairs run $200 – $400 when it’s alignment and limit switch work.
Yes, and we do it often in 75093, 75024, and 75094, where many Plano homes were built with manual gates and owners want automation added later. The key is checking the post footings first: a post poured for a manual gate wasn’t engineered for an operator’s torque, and in Plano’s clay soil that matters. We also have to run proper power and low-voltage conduit, which is usually the bigger cost than the operator itself. A complete manual-to-automatic conversion in Plano typically runs $1,800 – $3,800 including operator, conduit, safety edges, and post reinforcement. Call for a free on-site measure and written quote.
We service LiftMaster, Linear, Viking, Ghost Controls, DoorKing, FAAC, BFT, Elite, and Mighty Mule. In Plano specifically, builder-installed Linear and LiftMaster units are the most common we repair. Ghost Controls shows up often on gates homeowners automated themselves. DoorKing dominates Plano commercial and HOA slide gates. We carry parts for all of them, which means faster turnaround than a shop that has to order every board.
A commercial slide gate in Plano that’s jerky, noisy, or stopping mid-travel usually needs track cleaning, chain tensioning, and limit switch recalibration before anything gets replaced. That’s a $250 – $500 service call most of the time. If the operator itself is failing, we spec a replacement sized to the gate’s actual duty cycle and cycle count, not just its width, and we install it to UL 325 standards with the safety edges and loops your property manager’s insurance expects. Full replacement runs $1,800 – $4,500 on Plano commercial gates. Call (877) 265-5743 and we’ll assess it on site.
Written by Ronnie Beshears, Owner at Pinehurst Gate Repair, serving Plano and surrounding North Texas communities.