Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across Richardson
Gate repair in Richardson usually costs between $180 and $650 depending on whether you’re dealing with a sagging wrought-iron hinge, a dead operator board, or a slide gate that’s jumped its track. Most repairs we handle in Richardson are completed the same day we arrive, and we quote a firm price before any work starts. If your gate won’t open, drags across the driveway, or the keypad stopped talking to the operator, call Pinehurst Gate Repair at (877) 265-5743. Ronnie Beshears and our team know Richardson’s streets, its older ranch neighborhoods, and the particular ways clay soil and Texas heat wear down a gate.
We work on the gate you already have. Manual or electric, swing or slide, we diagnose the real problem and fix it without pushing a replacement unless the gate is genuinely beyond repair. That’s the difference a dedicated gate specialist brings to Richardson.
Why Pinehurst Gate Repair Is Richardson’s Preferred Gate Repair Company
Richardson homeowners keep calling us because we’re gate specialists, not generalists. We don’t split our attention across garage doors, fences, and a dozen other trades. Gates are what we do. Every day. That focus means when a FAAC hydraulic arm loses pressure on a 75082 driveway gate, or a LiftMaster operator on a Telecom Corridor security gate stops mid-cycle, we’ve already seen that failure mode dozens of times. Brand-specific diagnostic knowledge gets Richardson customers an accurate diagnosis faster and a repair that holds up.
We service nine major gate and operator brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. If your gate was installed in the 1990s or the 2020s, chances are we carry or can quickly source the parts. For Richardson specifically, that matters because the city’s housing stock spans original 1960s iron gates and newer 2000s automatic systems, each with different operator and hinge types. We stock common parts locally and can reach any Richardson neighborhood from Rowlett without losing half the day.
Ronnie Beshears built Pinehurst Gate Repair around a single idea: get the gate back to secure, operating the way it should, without a sales pitch. Richardson property managers and HOA boards appreciate that. We quote the repair, do the repair, and leave the gate closing cleanly behind you.
Styles & brands we work with
Sliding Gate Repair in Richardson
Sliding gate repair in Richardson is more common than people expect, especially in 75082 subdivisions near Renner Road where lot sizes are tighter and driveways aren’t wide enough for a full swing arc. A slide gate runs on a ground track or a cantilever system, and when something fails, the gate grinds, shudders, or refuses to close the last six inches. Richardson’s clay soil is often the culprit: wet-dry cycles heave the concrete track bed, the gate wheels lose contact, and the rack and pinion or chain starts binding.
A typical sliding gate track realignment in Richardson runs $250 to $450. If the operator itself has failed, replacing a control board or motor assembly generally costs $350 to $650. We quote the full price before we touch anything.
Track and Roller Realignment
When a slide gate jumps its track, the most common cause in Richardson is a settled or heaved track bed. We inspect the concrete pad, reset the track elevation where possible, and replace worn rollers or guide wheels. This beats forcing the operator to shove a misaligned gate, which burns out motors fast.
Operator Repair for Slide Gates
Slide gate operators from Viking, BFT, and Linear are common in Richardson’s newer subdivisions and commercial properties. We diagnose the control board, limit switches, and motor capacitor, then replace only what’s failed. You don’t pay for a new operator when a $30 limit switch is the real problem.
Wrought Iron Gate Repair in Richardson
Wrought iron gate repair in Richardson is our bread and butter in neighborhoods like Highland Terrace and Richardson Heights, where original 1960s iron gates have decades of service behind them. Those gates were built well, but the clay soil beneath the posts wasn’t kind. Posts heave out of plumb, hinges rust into place, and the gate starts dragging across the driveway or refusing to latch. We repair the ironwork and re-set the foundations, so the gate hangs straight again.
Wrought iron hinge and post repair in Richardson typically runs $250 to $500 depending on whether the post needs to be excavated and re-set in concrete or simply re-hung on new hinges. Weld repairs for cracked pickets or rusted-through rails usually add $150 to $300 to the job.
Post Re-Setting and Sag Correction
This is the job that separates a real fix from a temporary adjustment. In older Richardson neighborhoods, we commonly find posts that have moved one to three inches out of plumb over fifty years of clay-soil expansion. We excavate the old footing, re-set the post, and only then straighten the gate on its hinges. Adjusting hinges on a crooked post buys a few months; re-setting the post buys decades.
Rust Repair and Weld Work
North Texas humidity followed by broiling summer sun is rough on iron. We grind out rusted sections in Richardson’s older gates, weld in matching iron where rails or pickets have failed, and prime and paint the repaired area. The gate looks right and, more importantly, it’s structurally sound again.
Trusted Brands We Service in Richardson
We work on the brand you already have. For Richardson homeowners and commercial property managers, that usually means a LiftMaster, FAAC, BFT, Linear, or Viking operator, often paired with a Ghost Controls or Mighty Mule kit on residential installations. We carry diagnostic expertise on all nine brands we service, so we’re not guessing at proprietary control boards or motor specs. If your FAAC board has lost power or your LiftMaster operator is stuck mid-cycle, we know that system’s failure patterns. We keep common parts stocked for Richardson jobs and can source the rest quickly, usually without holding up your repair.
Common Gate Repair Problems We See in Richardson Homes
- Clay-soil post heave in older neighborhoods. Richardson’s expansive clay swells and shrinks with every wet-dry cycle, pushing 1960s gate posts out of alignment. We see this constantly in Richardson Heights and Highland Terrace, where a dragging gate is almost always a footing problem, not a hinge problem.
- Restricted working space in shared driveways. Many older Richardson homes share a driveway or have a narrow side yard where the gate sits with inches to spare. We work carefully in those spaces, and we coordinate with neighbors when a right of way has to stay open for two households during the repair.
- Operator failures from summer heat. Gate operator control boards sit inside metal cabinets that bake in Richardson’s July and August sun. Capacitors bulge, boards fail, and the gate works intermittently or not at all. We see a spike in these calls every summer.
- Slide gates jumping tracks in 75082 subdivisions. Newer master-planned areas near Renner Road have a lot of decorative slide gates. When the track bed settles unevenly, the gate climbs out of the track and the operator strains. Re-leveling the track usually fixes it without replacing the gate.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Repair in Richardson, TX
Here’s the honest picture, because Richardson customers deserve numbers before they call. A basic hinge adjustment or latch repair on a wrought-iron gate runs $180 to $280. Re-setting a heaved post in concrete runs $300 to $500, and that price includes excavation, new concrete, and re-hanging the gate. Operator control board replacement ranges from $350 to $650 depending on the brand and board. Slide gate track realignment runs $250 to $450. What affects your price: post movement severity, whether we’re welding rusted sections, and how difficult access is in a tight Richardson driveway. Every price is quoted and agreed before any work begins. Call (877) 265-5743 for a free estimate, and Ronnie Beshears will tell you exactly what the repair will cost.
We Also Serve Cities Near Richardson
Pinehurst Gate Repair covers Richardson and the surrounding North Texas communities. If you’re in University Park, Highland Park, Garland, or Dallas, our Gate Repair team can reach you just as easily. We’re based in Rowlett, so the drive into Richardson or any neighboring city is short, and we know the local roads and neighborhoods well.
Serving Richardson, TX — Our Local Coverage Area
We’re based in the Richardson area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Richardson
In Highland Terrace and Richardson Heights, a dragging 1960s wrought-iron gate usually means the hinge post has heaved out of plumb from decades of clay-soil movement, not that the hinges are simply loose. We’ll assess the post with a level before touching any hardware. If the post is still square, a hinge adjustment and sag correction runs $180 to $280. If the post has moved, we re-set it in fresh concrete for $300 to $500 and then re-hang the gate straight. Either way, you get a firm price before work starts. Call (877) 265-5743 and we’ll take a look.
We work by hand where we have to. Many Richardson homes, especially in older 75080 and 75081 neighborhoods, have shared driveways or narrow side yards with restricted access. We bring compact tools, coordinate access with neighbors when a right of way is involved, and keep vehicle and pedestrian passage open during the repair. The work takes a little longer in tight spaces, but the price doesn’t change. We quote it upfront.
Usually it’s the track or the rack, not the operator. In 75082 subdivisions near Renner Road, clay-soil settlement under the track bed causes the gate to bind before it reaches the closed position. We check the track elevation, the rack teeth for wear, and only then test the operator’s limit switches. If replacing the operator isn’t necessary, we won’t recommend it. Track realignment in Richardson runs $250 to $450.
Yes. We service LiftMaster and FAAC operators, plus BFT, Linear, Viking, DoorKing, Elite, and others, on commercial perimeter gates along the Telecom Corridor and across Richardson. Those 1980s office-park gates see heavy daily cycles, and we know the failure patterns: worn chain drives, failed loop detectors, sun-baked control boards, and limit switches that drift. Commercial gate repair follows the same rule as residential: diagnosed first, quoted first, repaired properly. Call (877) 265-5743 to schedule a service visit.
Clay-soil post heave, without question. Richardson sits on expansive clay that swells when wet and shrinks when dry. Over five or six decades, that movement slowly pushes gate posts out of plumb in neighborhoods like Highland Terrace and Richardson Heights. The gate starts dragging, the operator strains, and eventually something fails. That’s why a simple-looking sag often turns into a post re-setting job. It’s the most Richardson-specific gate problem we see, and we’ve got the process down.
Get Your Richardson Gate Back to Secure
If your gate is dragging, stuck, or refusing to open, call Pinehurst Gate Repair at (877) 265-5743. We’ll diagnose the problem, give you a firm price, and get the gate operating the way it should. Ronnie Beshears and our team serve all of Richardson, from Highland Terrace to the Telecom Corridor and the 75082 subdivisions near Renner Road. Manual or electric, swing or slide, we work on the gate you already have.
Written by Ronnie Beshears, Owner at Pinehurst Gate Repair, serving Richardson and the surrounding North Texas communities.