Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across University Park
Gate repair in University Park usually comes down to one of three things: a builder-grade operator that was never right from day one, a wrought-iron gate sagging on a post that shifted in the clay, or hail damage that bent a picket and threw the whole gate off its travel path. We’re Pinehurst Gate Repair, and we handle all three, plus everything in between, on the custom estate gates, driveway swing gates, and ornamental iron pedestrian gates that define 75225. If your gate is dragging, faulting, or stuck, call us at (877) 265-5743. We work the Park Cities regularly and know what these gates need.
Most of our University Park calls are on homes built between the 1920s and the 2010s, where the ironwork is original but the automation is not. That mismatch is exactly the kind of problem a generalist contractor misdiagnoses. We don’t. We’re gate specialists, not generalists, and we come to University Park equipped to repair the gate you already have, not sell you something you don’t need.
Why Pinehurst Gate Repair Is University Park’s Preferred Gate Repair Company
University Park homeowners tend to call us after trying a fence company or a handyman first. That’s not a knock on those crews. It’s just the reality of a town where a driveway gate might be a 1940s Colonial original with braces welded by a blacksmith, and the operator on it might be a 2018 LiftMaster that was retrofitted in without a dedicated circuit. Diagnosing that combination correctly takes someone who works on gates exclusively, and that’s us.
We service nine gate and operator brands, from LiftMaster and FAAC to Mighty Mule and BFT, so when a University Park customer describes a gate that faults at the same point in its cycle every afternoon, we usually know the cause before we roll the truck. We have worked gates on McFarlin Boulevard, along the Darwin and University corridors, and throughout the estate lots north of Mockingbird, and the pattern is consistent: the ironwork holds up, and the automation gives out first.
Ronnie Beshears runs the shop and has trained our techs to approach every University Park job the same way: find the real fault, repair what’s repairable, and quote a replacement only when it genuinely costs less over five years than another repair would. That approach earns repeat calls and referrals in a community where word moves fast. When you call (877) 265-5743, you get a gate tech, not a dispatcher reading from a script.
Styles & brands we work with
Wood Gate Repair in University Park
Wood gate repair in University Park is nearly always about the frame, not the pickets. On the cedar side gates and driveway privacy gates that line the alleys east of Turtle Creek, the first thing to fail is the cross-brace or the corner joint, because North Texas heat dries the lumber and the clay movement torques the post. Homeowners see a gate that won’t latch or drags against the fence line, and in most cases the fix is structural: re-mortise a hinge, replace a split rail, re-square the frame, and re-hang it so it clears the grade. In University Park, a typical wood gate repair runs $180 to $450, with most jobs finished same-visit. If the post itself has moved in the clay, add post reset or replacement, which runs $250 to $600 depending on the footing and access.
Hinges, Rails, and Re-Hangs
A wood gate that drags has usually torqued at the hinge side. We replace rusted strap hinges with heavier hardware, mortised properly into the frame, and re-hang the gate with a reveal that leaves room for the wet-season clay swell. On the 1920s-40s properties near the SMU edge, the original gate frames are often true lumber worth saving. On the 1990s rebuilds, the frames are thinner and usually need a mid-rail added.
Post Reset and Grade Work
The ground in University Park is expansive clay that shrinks in August and swells after spring storms. A wood gate post set near a sprinkler line or a downspout is almost guaranteed to drift. We pull the post, re-set it in a concrete footing with gravel drainage at the bottom, and re-align the gate to travel clean. We quote that price before any work starts, and you approve it first.
Driveway Gate Repair in University Park
Driveway gate repair in University Park is often a retrofit problem masquerading as a mechanical one. On the estate lots off Preston and Hillcrest, the driveway gate itself may be 30 or 60 years old, with forged hinges and an iron panel that weighs 400 pounds or more. The gate is fine. What’s failing is the automation that was bolted onto a gate that was hung as a manual gate years ago, with no poured post footing for drive hardware and no conduit for power. A driveway gate repair here runs $350 to $950 for mechanical work, and automation retrofits with proper power and safety devices run $1,800 to $3,400 depending on access, operator, and control options.
Swing Gate Realignment and Post Footings
When a University Park driveway gate starts to drift or drag, the cause is rarely the operator. The hinge post has almost always shifted in the shrink-swell clay, and the gate is now traveling an arc it wasn’t designed for. We set up a temporary support, re-pour or re-engineer the post footing, and re-hang the gate so it swings clean through the full wet-dry cycle. Patching the symptom without fixing the post is a waste of your money.
Automation Retrofits on Manual Gates
Most University Park estate gates were hung decades before automation was standard. Adding an operator to one of those gates means running a dedicated circuit and low-voltage control wiring, setting a proper post or piling for the drive arm, and mounting safety photocells to meet current standards. We install LiftMaster, BFT, and FAAC operators on these retrofit jobs, and we route conduit so it’s hidden under landscaping, not stapled to the brick. This is the single most common job we quote in 75225.
Trusted Brands We Service in University Park
We work on the brand you already have. If your driveway has a LiftMaster that came with a 2010s rebuild, or a FAAC board on a pedestrian gate the previous owner imported, or a Mighty Mule on a Cedar side gate, we diagnose and repair all of them. The operators around University Park are a mix: original builder-grade units on the newer rebuilds, older commercial-grade units on the estate properties, and a lot of Ghost Controls and BFT on the pool enclosure gates. Our techs know the proprietary control boards, the voltage requirements, and the failure points on each, so we come to the job with the right parts instead of guessing on your dime. Call (877) 265-5743 and we will let you know which brands apply to your setup and what parts we stock locally.
See the difference
Before
After
Before
After
Before
AfterCommon Gate Repair Problems We See in University Park Homes
- Builder-grade operators that fault every week. On newer rebuilds near the SMU edge, the gate was hung as a manual gate years before the house was replaced, and the operator was added later without a proper power run or post footing. The operator faults, the homeowner resets it, and the cycle repeats.
- Wrought-iron driveway gates that sag and drag. The 1920s-2000s estate ironwork looks solid, but the hinge post has moved in the expansive clay and the gate now binds mid-travel. The fix is a real post footing, not a shim.
- Hail-season damage across 75225. Spring hail bends pickets and top rails, knocks gates off their tracks, and dents operator housings until the unit loses its limit settings. Every serious storm sends a wave of these calls.
- Missing safety devices on automated gates. A surprising number of University Park automations lack working photocells or force-reverse settings, which is a hazard and a code issue. We test them on every service call and quote the retrofit if they’re absent.
Pricing for Gate Repair in University Park, TX
Here’s what you can expect to pay in the 75225 market, based on the work we’re doing on these streets every week. A diagnostic visit runs $89, and we credit that toward the repair if you approve the quote that same day. Mechanical hinge-and-realignment work on a driveway gate runs $350 to $950. A full automation retrofit with a proper circuit, conduit, new operator, and safety photocells runs $1,800 to $3,400, depending on gate length, weight, and operator brand. Wood gate repair falls in the $180 to $600 range. Post reset work on clay-shifted gates starts at $250. You’ll get a written price before we begin, and you’ll approve it first. That’s how Ronnie Beshears runs every University Park job. Call (877) 265-5743 for a free estimate.
We also want to be clear about one thing: the price we quote is the price you pay. No revised invoice after the gate is open, no surprises on the ticket. If we find something unrepairable mid-job, we stop and walk you through it.
We Also Serve Cities Near University Park
We run regular service routes from University Park into University Park and through the surrounding neighborhoods including Highland Park, Richardson, Dallas, and Addison. If your gate is the same generation of ironwork but a different ZIP, the problems are usually the same. Our Gate Repair team covers the whole corridor, and we book University Park jobs with the same appointment discipline we use in every market we serve.
Serving University Park, TX — Our Local Coverage Area
We’re based in the University Park area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in University Park
It involves running a dedicated low-voltage circuit and control wiring from your panel to the gate, setting a proper post or piling for the drive arm, mounting the operator, and installing safety photocells plus force-reverse settings. On an estate gate in University Park, the power and conduit runs are the biggest variable because they almost never exist on gates that were hung manually years ago. We quote the full job including the electrical run and the post footing, not just the operator, so you’ll know the complete number before anyone breaks ground. Call (877) 265-5743 and we can walk the job with you over the phone and in person.
Because the operator was bolted onto a gate that was never engineered for automation. The original University Park home was built before automation was standard, and when the house was rebuilt or renovated, the gate stayed manual and the operator was added as an afterthought. The result is no dedicated circuit, no proper post footing, and a gate that binds against the drive arm as the clay moves. We diagnose the weak point, whether it’s the motor, the control board, the wiring, or the post, and we repair it so it stops faulting. Call (877) 265-5743 for an exact diagnosis rather than another hand reset.
In University Park, it’s usually the post. The iron panels on these estate gates hold up for decades, but the hinge post sits in expansive clay that shrinks in summer and swells in spring. After enough wet-dry cycles, the post drifts and the gate starts dragging. We set the post in a proper concrete footing with drainage, then re-hang the gate to travel clean. The gate itself often needs nothing more than a touch-up, assuming hail hasn’t beaten the pickets.
Yes. We service nine brands including LiftMaster, FAAC, BFT, Mighty Mule, and Ghost Controls, plus the commercial-grade units on older University Park estates. We carry or can source boards, limit switches, remotes, and drive parts for all of them, and our techs are trained on the wiring and voltage requirements specific to each brand. You don’t have to replace a perfectly good operator just because a generalist doesn’t stock the part.
Yes, every storm season. Hail bends pickets and top rails, knocks gates off their track, and dents operator housings until the limits fail. We straighten or re-fabricate the iron, re-track the gate, and replace damaged operators and safety devices. In University Park, where the mature tree canopy can hide damage until the gate won’t close, we recommend a storm post-check on any gate that took direct hail to the top rail. Call (877) 265-5743 and we’ll get you on the schedule.
If your gate in University Park is giving you trouble, don’t reset it a third time and hope the problem goes away. Call us at (877) 265-5743 and we’ll send a gate tech who knows the equipment on these exact streets. Free estimates, written quotes, and the repair done the way it should have been done from the start.
Written by Ronnie Beshears, Owner at Pinehurst Gate Repair, serving University Park and the surrounding Park Cities.