Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Murphy, TX
Gate installation in Murphy means working with 15-to-25-year-old subdivision entries and driveway gates that builders put in when the city was growing fast. Most of these systems are now past their expected service life, and Murphy’s blackland clay soil has shifted posts and strained hinges for years. We replace and install gates that match HOA design standards, handle the electrical work for automated systems, and build entries that stay square and functional through North Texas wet-dry cycles. If your gate is sagging, failing to open, or simply done, call Pinehurst Gate Repair at (877) 265-5743 for a free estimate.
Why Murphy Homes Are Different
Murphy’s housing stock is dominated by late-1990s to 2000s traditional brick and stone homes on small lots, and a large share of them sit inside HOAs with common-area gated entries and matching driveway gates. Those gates were installed during a construction boom along FM 544 and Murphy Road, which means the operator boards, hinges, and posts are all reaching end-of-life at roughly the same time. What makes Murphy distinct is the combination of that aging inventory and the soil underneath it. North Texas clay expands and contracts dramatically with moisture. After a heavy rain, gate posts in Murphy’s blackland clay often swell and tilt just enough that automatic openers bind or safety sensors trip. We see that call pattern spike with every spring storm. Homeowners and HOA managers also deal with strict architectural standards: when a common-area gate fails, the replacement has to match the original style. We work within those requirements every week.
Styles & brands we work with
Our Main Murphy Services
Homeowners and property managers in Murphy call us most often for two things: a gate that has stopped working and needs repair, or an automated system that has electrical or control-board trouble. Both are covered below.
Gate Repair in Murphy
Most gate repair calls in Murphy involve posts that have shifted in the clay, sagging hinges, or latch hardware that no longer lines up. We repair manual and automated gates, replace worn hardware, and re-set posts that the soil has moved. On older builder-grade gates, the hinge welds fatigue and the gate drags or binds. We address the mechanical failure first, then re-test the full swing or slide path. For full details on what we fix and what it costs, see our Gate Repair in Murphy page.
Electric Gate Repair in Murphy
Electric gate failures in Murphy often trace to control boards, safety sensors, or motors that have been stressed by posts shifting out of alignment. When a post heaves after rain, the opener has to work harder, and eventually the board faults or the motor overheats. We diagnose both the electrical and mechanical sides of the system so the repair lasts. For automated systems, brand-specific diagnostic knowledge matters, because a LiftMaster board failure and a FAAC sensor fault present differently. See Electric Gate Repair in Murphy for the full breakdown.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Murphy
Gate installation in Murphy usually means replacing a 15-to-25-year-old builder-grade gate and operator that has reached the end of its life, often on a property where HOA standards dictate the replacement’s look and dimensions. The soil here makes proper post setting the single most important step: we dig below the shifting clay line, set posts in concrete, and build the frame so it does not bind when the ground moves through wet and dry cycles. Whether you are replacing a failed driveway gate or putting in an automated entry for the first time, we handle the entire scope, including the low-voltage power run and safety edges. This is not a job we hand off to another contractor. For the full range of what we install, see our Gate Installation service page.
Automatic Gate Installation
Signs you need it
Your current gate opens manually, or the existing operator is dead and the cost of repeated board and motor replacements no longer makes sense.
What it costs in Murphy
Automatic gate installation in Murphy typically runs from $2,500 to $8,500 depending on whether we are adding an operator to an existing gate or building the full automated system from new posts and framing to controls, safety edges, and power.
How we do it
We confirm the gate’s weight and cycle needs, set or re-set posts to hold alignment, mount the operator, run low-voltage wiring, install safety edges and photo sensors, and test the full open-close cycle with obstruction detection.
Driveway Gate Installation
Signs you need it
Your driveway gate is sagging, the frame is rusted or bent, or posts have shifted far enough in the clay that the gate no longer closes squarely or latches.
What it costs in Murphy
Driveway gate installation in Murphy typically costs $1,800 to $6,000 for a manual gate; adding an automatic opener brings the total to $2,500 to $8,500.
How we do it
We remove the old gate and hardware, dig post footings below the shifting clay, set steel posts in concrete, hang the new gate, align the latch and stops, and make final adjustments after the concrete cures.
Sliding Gate Installation
Signs you need it
Your property has a narrow driveway or short setback where a swing gate cannot open fully without hitting a vehicle or structure, and a sliding gate is the practical solution.
What it costs in Murphy
Sliding gate installation in Murphy typically runs from $3,000 to $9,500, with the higher end including a cantilever or track system, an operator, and the full electrical package.
How we do it
We pour a level concrete track or set cantilever posts, hang the gate on rollers, install the motor and rack, set travel limits, and test the gate through repeated cycles with safety sensors in place.
What Gate Installation Costs in Murphy
| Item | Typical range in Murphy |
|---|---|
| Manual driveway gate, installed | $1,800 – $6,000 |
| Automatic gate system with operator | $2,500 – $8,500 |
| Sliding gate with track and operator | $3,000 – $9,500 |
Do Murphy HOAs have to approve a new gate?
Yes, in almost all Murphy subdivisions with architectural review, you must submit the gate style, material, and finish before installation. We can provide spec sheets and dimension drawings to include with your request.
Can you install the gate and run the electrical in one visit?
We do the full mechanical and low-voltage electrical installation ourselves, including the power run, safety edges, and operator programming, so you do not need to coordinate a second contractor for the wiring.
Brands We Service in Murphy
We service operators and hardware from LiftMaster, FAAC, Mighty Mule, and BFT, among others, and we carry common control boards, sensors, and remote kits so many repairs happen without waiting on a parts order. When a board is specific to an older FAAC or LiftMaster model, we source it fast. See our brands for the full list of systems we know.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Murphy, TX
| Service | Typical range in Murphy |
|---|---|
| Manual gate repair | $150 – $600 |
| Automated gate repair | $200 – $800 |
| Control board replacement | $350 – $1,200 |
| Gate opener motor replacement | $500 – $1,500 |
| Hinge and post repair | $250 – $900 |
| Manual driveway gate installation | $1,800 – $6,000 |
| Automatic gate installation | $2,500 – $8,500 |
| Sliding gate installation | $3,000 – $9,500 |
In Murphy, price shifts upward when posts have heaved far enough in the clay that re-setting footings is required, or when the HOA mandates a specific gate material or finish. Every job is quoted and agreed to in writing before work begins, so the number you approve is the number you pay. Call (877) 265-5743 for a free estimate.
Neighborhoods We Serve in Murphy
We work throughout Murphy’s HOA subdivisions and the older streets off Murphy Road and FM 544. Response times in the Murphy area are typically same-day for emergency repair calls and within a day or two for scheduled installation work.
- Maxwell Creek
- Rolling Ridge
- Timbers of Murphy
- Murphy Farms
- Windy Hill Farms
Service Area – Cities Near Murphy
Pinehurst Gate Repair serves Murphy and the surrounding Collin County communities. If you are in a neighboring city, we likely cover it as well: Parker, TX, Sachse, TX, Saint Paul, TX, and Wylie, TX.
Serving Murphy, TX — Our Local Coverage Area
We’re based in the Murphy area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Murphy
For a gate stuck open, stuck closed, or an automated system that will not secure, we aim to reach Murphy properties the same day you call. Emergency calls in the 75094 zip code are prioritized, and we keep common control boards and hardware in local stock to reduce return trips.
Yes, we work directly with HOA boards and property managers on common-area entries, including operator replacement, compliant gate installation, and scheduled maintenance. We can provide the documentation most Murphy HOAs require before approving a gate replacement.
Yes, Murphy’s 75094 zip code is in our primary service area. We cover all residential neighborhoods and commercial gate systems throughout the city, including projects that require HOA design review or architectural approval. Call (877) 265-5743 to schedule a visit.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Murphy Customers Say
"Photo eye was misaligned so the gate refused to close after dark. Ten minute fix. He also cleaned the lens and pointed out that the sprinkler head was spraying it every morning, which is why it kept happening."
— Claudia Torres"Control board fried after a lightning storm. He showed me the burn mark on it, quoted the board, and installed a surge protector on the line so it hopefully doesn't happen again."
— Sofia Flores"Gate stopped halfway and sat there for two days blocking the driveway. He found a dead capacitor in the operator, had one with him, and we were moving cars again in under an hour."
— Heather Rhodes