Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in McLendon-Chisholm, TX
Gate installation in McLendon-Chisholm is not the same job it is in a suburban tract. Around here we’re building and hanging drive gates on multi-acre lots, mounting operators on stone or masonry columns, and anchoring posts in blackland clay that moves more than most people realize. Pinehurst Gate Repair handles the full scope: new gate installation, electric operator setup, and the repair work that keeps an existing gate running on a long private drive. Whether you’re on acreage off a county road or in a newer estate home with a perimeter fence, one call to (877) 265-5743 gets you a gate specialist who works on the brand you already have.
Why McLendon-Chisholm Homes Are Different
Most of McLendon-Chisholm sits in ZIP code 75032, a low-density pocket of Rockwall County where properties are large, fenced, and often gated. The housing stock mixes older ranch and farm properties with newer custom estate homes, and nearly every one of them has some form of perimeter fencing with a drive gate at the entry. The homes we service in McLendon-Chisholm tend to have one thing in common: the gate is at the end of a long driveway, often automated, and it is the only practical way in or out for vehicles.
The soil is the wildcard here. Expansive blackland clay absorbs water during North Texas rainy spells and shrinks during drought. That cycle pushes gate posts out of plumb, which throws hinges, latch alignment, and electric opener geometry off over time. We see it constantly: a gate that worked fine in March binds by August. Wind exposure across open acreage adds another load on operators, and summer heat cooking a control board in a metal enclosure is a routine repair call for us in McLendon-Chisholm. A gate specialist who does not understand the local soil is going to chase symptoms instead of fixing the post movement that caused them.
Styles & brands we work with
Our Main McLendon-Chisholm Services
The two calls we get most often from McLendon-Chisholm homeowners and property managers are for mechanical gate repair and for electric gate systems that have stopped responding. Both services have their own dedicated pages with full pricing and sub-job detail.
Gate Repair in McLendon-Chisholm
When a drive gate on a McLendon-Chisholm property stops latching or starts dragging, it is almost always a mechanical issue: a hinge pulling out of a stone column, a post that shifted in expansive clay, a sagging leaf on a long run of pipe-rail. We repair hinges, reset posts, straighten frames, and rebuild latch hardware on the gate you already own rather than pushing a replacement. On the big lots along the 75032 rural roads, a gate that will not close is a real security problem, not an inconvenience. Learn more on our dedicated Gate Repair in McLendon-Chisholm page.
Electric Gate Repair in McLendon-Chisholm
Automatic gates in McLendon-Chisholm take more abuse than most operators are built for: heat, wind, dust, and a gate leaf that can weigh several hundred pounds. We diagnose and repair the electric side as well as the mechanical: control boards, limit switches, safety loops, photo eyes, keypads, and remote receivers. If your LiftMaster operator is stuck mid-cycle or your FAAC board has lost power, we track down the fault directly rather than swapping parts on a guess. Full pricing and detail are on our Electric Gate Repair in McLendon-Chisholm page.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in McLendon-Chisholm
New gate installation in McLendon-Chisholm usually starts with a question: what is this gate actually holding in or keeping out? On acreage, it is often livestock or dogs. On an estate lot, it is privacy and controlled access. Pinehurst Gate Repair builds and hangs gates sized for the job: single swing gates on modest entries, double swing gates on wider drives, and slide gates where a driveway slopes or swings back into the property. We set posts deep enough to handle blackland clay movement, mount operators on reinforced columns, and run the low-voltage wiring so the system works the day we leave and keeps working through the first wet spring. This is the everyday work of our Gate Installation team, and every job is quoted before any work starts.
Automatic Gate Installation
Signs you need it
You are getting out of the truck twice a day to open and close a heavy drive gate by hand, or you have decided the property needs controlled entry that a manual gate cannot provide.
What it costs in McLendon-Chisholm
Automatic gate installation in McLendon-Chisholm typically runs $2,800 to $6,000 depending on gate size, operator type, and whether we are mounting to existing columns or setting new posts.
How we do it
We survey the entry, size the operator to the gate’s weight and cycle rate, set or reinforce the mounting points, run low-voltage power and safety loops, then program remotes and keypads and cycle-test the gate under load.
Driveway Gate Installation
Signs you need it
The driveway entry is wide open, you want a physical boundary at the road, or an old gate has failed beyond economical repair.
What it costs in McLendon-Chisholm
Driveway gate installation in McLendon-Chisholm generally falls between $1,800 and $3,800 for a manual gate, more when you add an operator and access controls.
How we do it
We measure the drive width and swing clearance, build or source the gate to match existing fence style, set posts below the frost and clay-movement line, hang and adjust the leaf, then install hardware and any automation you have specified.
Sliding Gate Installation
Signs you need it
Your driveway slopes up from the road, or you do not have the clearance for a swing gate to arc back across the property.
What it costs in McLendon-Chisholm
Sliding gate installation in McLendon-Chisholm typically costs $2,500 to $5,500 depending on track length, gate weight, and operator requirements.
How we do it
We install the rail and rollers on a level base, hang the gate so it travels without binding, mount the slide operator at the correct height, and set the travel limits and safety edges before final adjustment.
What Gate Installation Costs in McLendon-Chisholm
| Item | Typical range in McLendon-Chisholm |
|---|---|
| Manual single swing gate | $1,800 – $3,800 |
| Automatic gate with operator | $2,800 – $6,000 |
| Sliding gate with operator | $2,500 – $5,500 |
Do I need a permit for a new gate in McLendon-Chisholm?
Most rural and estate properties in McLendon-Chisholm do not require a gate permit for a like-for-like replacement, but new entry structures and any electrical run can trigger county review. We confirm the requirement for your specific property before we quote, and we handle the electrical to code either way.
Can you install a gate on an existing stone or masonry column?
Yes, and we do it often in McLendon-Chisholm. The column has to be sound and wide enough to carry the hinge load and operator torque. We reinforce with steel where needed, but if the column is cracked from years of soil movement, we will tell you honestly before hanging a heavy gate on it.
Brands We Service in McLendon-Chisholm
We work on the brand you already have. That includes LiftMaster, FAAC, BFT, and Mighty Mule operators, plus the mechanical hardware underneath them. We stock common boards, remotes, safety edges, and hinge components locally in the Dallas area, which means most McLendon-Chisholm repairs move faster than a dealer parts order. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in McLendon-Chisholm, TX
| Service | Typical range in McLendon-Chisholm |
|---|---|
| Gate repair call-out and labor | $150 – $450 |
| Hinge replacement (post-mounted) | $200 – $600 |
| Post reset or replacement | $500 – $1,600 |
| Latch and strike repair | $150 – $400 |
| Electric gate diagnostic | $100 – $300 |
| Operator replacement | $800 – $2,500 |
| Control board replacement | $350 – $1,000 |
| Photo eye or safety loop repair | $200 – $600 |
| Manual single swing gate install | $1,800 – $3,800 |
| Automatic gate install with operator | $2,800 – $6,000 |
| Sliding gate install with operator | $2,500 – $5,500 |
In McLendon-Chisholm, the two big price drivers are post work and operator complexity. A gate hung on shifting clay soil needs deeper footings and sometimes new columns, and a heavy double leaf with an older operator usually costs more to bring back to reliable service than a simple single swing. Whatever the number turns out to be, we quote it before any work begins, and that is the price you pay unless we find something we can show you and agree on first.
Neighborhoods We Serve in McLendon-Chisholm
We cover the full 75032 area, from the estate lots along the county roads to the subdivisions and custom homes closer to the Rockwall side. Most of the drive gates we service sit at the end of private lanes, and we schedule those calls with a wider arrival window because the property takes a few minutes to access.
- Sonoma Verde
- Heritage at McLendon-Chisholm
- Kingsbridge
- Rural acreage off TX-205
- Properties along Slate Creek and the eastern county roads
Service Area – Cities Near McLendon-Chisholm
Pinehurst Gate Repair covers McLendon-Chisholm and the surrounding Rockwall County communities. If you own a property just over the line, we regularly work in Heath, TX, Rockwall, TX, Fate, TX, and Royse City, TX. Same crew, same gate-specialist approach, same upfront pricing.
Serving McLendon-Chisholm, TX — Our Local Coverage Area
We’re based in the McLendon-Chisholm area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in McLendon-Chisholm
We schedule most McLendon-Chisholm calls within one to two business days, and we keep emergency slots for a gate stuck open or closed with animals at risk. Rural drive times are what they are, but we will give you a straight arrival window when you call, not a vague promise.
Some of the newer subdivisions in McLendon-Chisholm have architectural guidelines that control gate height, material, and the location of the operator. If you are in an HOA, we ask for the relevant section of your covenants before we quote, so the install does not get flagged after the concrete is poured.
Yes. We run the low-voltage side of an automatic gate ourselves: power from the panel to the operator, safety loops, photo eyes, keypads, and remotes. When a project needs a new 120-volt circuit run, we coordinate with a licensed electrician so the whole job still moves as one schedule.
If your gate is sagging, stuck, or needs to be replaced entirely, call Pinehurst Gate Repair at (877) 265-5743 for a free estimate. We are gate specialists in McLendon-Chisholm, and the price you are quoted is the price you pay – agreed before any work starts.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What McLendon-Chisholm Customers Say
"Solar panel on our remote gate wasn't keeping the battery up through the winter. He repositioned it, replaced the battery, and explained the math on why the old placement was never going to work."
— Diego Reyes"Fixed the immediate problem. He was honest that the operator is near end of life and I should budget for a replacement, which I appreciate even if it wasn't what I wanted to hear."
— Marco Rodriguez"We had a hydraulic arm leaking fluid onto the driveway. Replaced, cleaned up the stain as best he could, and it's been dry for months."
— Arjun Reddy