Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGhost Controls Gate Repair in Rowlett, TX | Pinehurst Gate Repair
If your Ghost Controls opener is dead, stuck mid-cycle, or reversing when it shouldn’t, we can fix it. We’re an independent Ghost Controls service provider working throughout Rowlett, and the repairs we do here are shaped by one thing most other markets don’t deal with: Lake Ray Hubbard. Salt-laden wind off the lake corrodes gate hardware along the welds and bottom rails faster than anywhere a mile inland, which means Rowlett Ghost Controls failures are often mechanical strain problems, not just board problems. Contact us for Rowlett Gate Repair or call (877) 265-5743 and we’ll diagnose it.
Pinehurst Gate Repair works on Ghost Controls solar and low-voltage swing and slide operators every week. We know the board revisions, the arm geometry, and where these openers fail on aging Rowlett gates. If you have a Rowlett service area property with a Ghost Controls system acting up, we’re the call.
Why Rowlett Residents Choose Us for Ghost Controls Service
Ronnie Beshears has called Rowlett home for most of his life, growing up near the shores of Lake Ray Hubbard before the subdivisions filled in. He learned electronics and mechanical systems at Eastfield College in Mesquite, then spent years getting hands-on with swing gates, slide gates, and everything LiftMaster and FAAC make. For well over a decade, he’s been the guy Rowlett homeowners and HOAs call when a gate operator quits mid-cycle or a loop detector goes haywire.
We’re gate specialists, not generalists. That matters when a Ghost Controls board drops its remote pairing or a solar battery won’t hold charge through a cold snap. We don’t guess at proprietary control boards. We’ve seen the failure enough times to know exactly where to look. Manual or electric, swing or slide, we work on the brand you already have, including our Electric Gate Repair in Rowlett.
We source OEM Ghost Controls boards, arms, receivers, and battery and solar components where they’re available. Where the original part is discontinued or overpriced, we use quality aftermarket hardware, and we tell you which route we’re taking before we start. No surprises on the invoice.
Styles & brands we work with





Common Ghost Controls Gate Repair Problems We Solve in Rowlett
- Control board and speed-control circuitry failure: North Texas heat cycles and constant humidity off Lake Ray Hubbard age these boards hard. A board that ran fine for a decade starts dropping remotes or running only one direction. We diagnose the actual board failure rather than throwing parts at it.
- Photo-eye and safety-edge faults: Sun glare, blowing lake dust, and spring hailstorm debris trip the beam, so the gate reverses mid-travel or refuses to close at all. We re-aim, clean, replace, and when needed relocate the eyes so they work with your driveway’s sight lines, not against them.
- Solar panel and battery degradation: Panels clouded or shaded by mature subdivision trees, batteries that no longer hold charge through a cold snap. A 2021-style freeze leaves the gate dead. We test the panel output and battery health separately so we’re not replacing the wrong half of the system.
- Mechanical strain transmitted back into the operator: Sagging cantilever arms or rusted hinges on 2000s-era aluminum and iron gates overload the Ghost Controls arm, shear the pins, or burn the motor. In Rowlett, this is the most common root cause we find, and it’s the one that gets misdiagnosed most often.
- Remote and keypad pairing loss, worn gearboxes, and failed limit switches: High-cycle operators on rear-driveway side-entry gates, common in Rowlett’s late-1990s-to-2010s subdivisions, wear gearboxes and limit switches faster than front-entry gates. We keep OEM receivers and limit switches coming so turnaround stays short.
Ghost Controls Service in Rowlett: What Local Conditions Mean for Your Equipment
Rowlett’s Harbor Bay and lakeside subdivisions sit in salt-laden, wind-driven air off Lake Ray Hubbard. Galvanized steel and untreated iron gates rust at the welds and bottom rail years before gates a mile inland, and HOA design-review rules mean any repair or replacement has to match the builder’s original aluminum or iron style and color. That combination changes how we approach a Ghost Controls repair here: we’re not just swapping a board, we’re treating the corrosion that’s pulling the gate out of square and overloading the operator. A Ghost Controls dual swing opener on a lakeside property will keep burning through pins and arms until the mechanical alignment is corrected and the rust is stopped. This is the part of the job that makes Rowlett work different from a repair across the bridge in Garland.
Ghost Controls Models & Products We Service in Rowlett
We service Ghost Controls Heavy-Duty Dual Swing Gate Openers, including the AXL dual-arm residential kits, the Standard Single Swing Gate Openers in the TSS1 family, and the tubular-arm slide gate operator kits. We also work on Ghost Controls solar-charged packages with AC and solar hybrid charging, which are common on Rowlett gates where running line voltage to the gate would’ve meant trenching across a driveway. Our parts approach is straightforward: OEM Ghost Controls boards, arms, receivers, and battery and solar components where they’re available, quality aftermarket hardware where the original is discontinued or overpriced. On a sound 2000s-era gate, we refurbish rather than push a full replacement. We only recommend a new operator when the housing, board, and arm are all past saving. For wider brand coverage, see our Ghost Controls sales & service page.
See the difference
Before
After
Before
After
Before
AfterGhost Controls Service Pricing in Rowlett
Ghost Controls repair in Wylie and Rowlett varies by what’s actually failed. A photo-eye or limit switch replacement runs less than a full board replacement, and a rusted hinge or sagging arm repair runs less than either. What drives the cost is parts availability: some OEM Ghost Controls boards are readily sourced, others take a few days. Aftermarket hardware keeps mechanical repairs affordable. Every job is quoted and agreed before any work starts, and the estimate is free. Call (877) 265-5743 and we’ll tell you what we’re seeing and what it’ll cost to make it right.
Serving Rowlett, TX — Our Local Coverage Area
We’re based in the Rowlett area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Ghost Controls Gate Repair in Rowlett
That’s almost always a photo-eye or safety-edge fault, not a motor failure. Sun, lake dust, or debris trips the beam, and the gate reverses as a safety default. We test the eyes, the edge, and the wiring before touching the operator. Call (877) 265-5743 and we’ll walk you through what to check.
Could be either, and guessing is what makes this expensive. We test the panel output and the battery’s charge capacity separately so you’re only paying for the part that’s actually dead. In Rowlett, we see both, often at the same time.
Yes, and that’s most of what we do in Rowlett. We wire-brush, treat, and reinforce rusted hinges and bottom rails, and we re-align the arms so the operator isn’t fighting the gate. If the operator survived, it usually stays. If it’s burned out, we’ll tell you that too, and quote only what’s needed.
Yes. Rowlett HOA design-review rules in the lakeside and Harbor Bay communities often require matching the builder’s original aluminum or iron style and color. We’re used to those constraints and source materials that pass review. If you’re not sure what your HOA requires, we can tell you what we’ve seen approved in your subdivision.
They can. Heat cycling and humidity off Lake Ray Hubbard cause receiver and board failures on these openers, and remotes drop their pairing. We re-pair, replace receivers, and where the keypad is the issue, we test it before replacing anything. Call (877) 265-5743 for a free estimate.
Service Areas Near Rowlett
We run Ghost Controls service calls across Rowlett and the nearby cities: Ghost Controls service in Garland, Ghost Controls service in Sachse, plus Rockwall, Heath, and Sunnyvale. If your gate is in one of those corners of the county, we’ll route a tech out the same way we do in Rowlett.
Book Your Ghost Controls Service in Rowlett Today
If your gate’s acting up, there’s a reason, let’s find it. Call (877) 265-5743 and we’ll get a tech scheduled. Estimates are free, and we’ll quote the price before any work begins.
Written by Ronnie Beshears, Owner at Pinehurst Gate Repair, serving Rowlett since well over a decade.