Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateStyles & brands we work with
See the difference
Before
After
Before
After
Before
AfterHow Much Does Gate Access Control Cost in Rowlett?
Gate access control in Rowlett typically runs $850 to $4,500 for a residential system, with most single-driveway keypad and intercom setups landing near $1,200 to $2,200 installed. A straightforward keypad swap or new entry device often comes in under $900, while a multi-unit HOA or commercial slide gate with telephone entry and vehicle detection pushes toward $4,000 and up. What you pay depends mostly on how many entry points you’re controlling, whether the operator is already in place, and what kind of credentials you want residents or tenants to use.
Gate Access Control Cost Breakdown (2026)
Here’s how the line items break down in the Rowlett market this year. These are installed ranges for a residential or light-commercial gate, not parts-only pricing.
| Component / Service | Typical Installed Range (2026) |
|---|---|
| Keypad or push-button entry (single gate) | $650 – $1,100 |
| Telephone / intercom entry system | $1,400 – $2,800 |
| RFID card or fob reader (per reader) | $500 – $950 |
| Vehicle loop detector (safety / exit trigger) | $400 – $750 |
| Photocell safety beam pair | $300 – $550 |
| Control board replacement | $450 – $900 |
| Low-voltage wiring run (per 100 ft) | $250 – $600 |
| New gate operator (swing or slide) with access device | $2,400 – $4,500 |
| Full commercial access system (multi-tenant, DoorKing or similar) | $4,000 – $9,000+ |
| Diagnostic service call | $95 – $175 (often credited toward the repair) |
The single biggest driver is whether you’re adding access control to an operator that’s already there or starting from a gate with no operator at all. A keypad on a working LiftMaster swing operator is a half-day job. A brand-new automated slide gate with a DoorKing telephone entry system, two safety loops, and new low-voltage wiring is a multi-day project. Brand also moves the number. We work on the brand you already have, so if your operator is a FAAC, BFT, Linear, Viking, Ghost Controls, Elite, or Mighty Mule unit, we’re pricing the access device and integration rather than pushing a full operator replacement.
What Affects Gate Access Control Pricing in Rowlett
- Number of entry points and credentials. One keypad is cheap to add. A gated community off Dalrock or along Lakeview Parkway with a main entry, a resident-only lane, and a delivery lane triples the readers and wiring, and the price tracks with it.
- Existing operator vs. new operator. If your gate already cycles on a LiftMaster or Linear operator, adding access control is mostly device and wiring cost. If the gate is manual or the operator is dead, the operator itself becomes the largest line item.
- Slide vs. swing. Slide operators carry more hardware, more track or rack work, and more safety devices, so they sit higher than swing operators on most quotes.
- Distance from the control point. Rowlett lots are generous, and a detached entry keypad 250 feet from the house means a longer low-voltage run, sometimes trenching, and occasionally a second power drop. That wiring adds real money.
- Credential technology. A simple keypad is the least expensive entry method. RFID readers, telephone entry with resident directories, and smartphone app integration each add cost and, on commercial accounts, ongoing service or software considerations.
- Safety compliance and code. Automated gates need photocells and, where the gate faces a drive or street, prudent loop detection. In Rowlett, summer heat and the clay soil movement we see across Rockwall County both stress buried loops and exterior control boards, so we build in a realistic safety device package rather than skip it and revisit it.
How to Save on Gate Access Control
There’s no secret discount to access control, but there are real ways to keep the number down.
- Keep a working operator. If your operator runs fine and only the entry device failed, repair the device and leave the operator alone. A $700 keypad repair beats a $3,500 system replacement.
- Diagnose before you replace. A dead keypad or a gate that won’t respond is often a control board, a blown fuse, or a wiring fault, not a whole-system failure. On the brand you already have, brand-specific diagnostic knowledge means we find the real fault instead of guessing at the proprietary control board.
- Bundle devices into one visit. Adding a keypad and photocells on the same trip costs less than two separate service calls.
- Match the credential to the need. A homeowner with one family doesn’t need telephone entry with a resident directory. Choose the simplest device that does the job.
- Plan around installation, not emergency. A scheduled install is cheaper than an after-hours emergency call. If your gate is working and you’re upgrading, get on the schedule now.
We give free estimates on access control work, so you can see the real number for your gate before you commit. Call (877) 265-5743 and we’ll size it up.
FAQs – Gate Access Control Cost
How much does a keypad entry cost for a gate in Rowlett?
A keypad or push-button entry for a single gate typically runs $650 to $1,100 installed in Rowlett. That covers the device, the low-voltage wiring, and integration with your existing operator. If your operator is already a LiftMaster or Linear unit we support, you’re mostly paying for the device and the labor to land it. Call (877) 265-5743 for an exact quote on your gate; estimates are free.
Is it cheaper to repair or replace my gate access system?
Repair is usually cheaper – a control board, keypad, or wiring fix typically lands between $300 and $900, while a full system replacement starts around $2,400 and climbs fast. Replacement only makes sense when the operator itself is failing and the access devices are near end of life. We diagnose first so you’re not sold a replacement for a repair. Call (877) 265-5743 and we’ll tell you which one your gate actually needs.
How much does a commercial or HOA gate access system cost in Rowlett?
A multi-tenant or HOA access system in Rowlett typically runs $4,000 to $9,000 or more, depending on entry lanes, the number of resident readers, and whether you need telephone entry with a directory and vehicle detection. We service DoorKing and the other commercial operators these systems run on. Call (877) 265-5743 for a site-specific estimate.
Do you charge for the diagnostic visit?
Our diagnostic service call runs $95 to $175, and it’s often credited toward the repair. A proper diagnosis on a proprietary control board saves you money because it points straight at the fault instead of swapping parts and hoping. Call (877) 265-5743 to schedule; estimates are free.
Can you add access control to a manual gate?
Yes – adding access control to a manual gate means adding an operator, so expect $2,400 to $4,500 for a swing or slide operator plus the entry device and safety package. Manual or electric, swing or slide, we handle the full scope so you don’t need a separate installer. Call (877) 265-5743 for a free estimate on automating your gate.
Pricing reflects the Rowlett market as of 2026. Pinehurst Gate Repair offers free estimates – call (877) 265-5743.
What Our Customers Say
"Photo eye was misaligned so the gate refused to close after dark. Ten minute fix. He also cleaned the lens and pointed out that the sprinkler head was spraying it every morning, which is why it kept happening."
— Claudia Torres"Control board fried after a lightning storm. He showed me the burn mark on it, quoted the board, and installed a surge protector on the line so it hopefully doesn't happen again."
— Sofia Flores"Gate stopped halfway and sat there for two days blocking the driveway. He found a dead capacitor in the operator, had one with him, and we were moving cars again in under an hour."
— Heather Rhodes