Farm & ranch
Wrought iron
Wood & steel frame
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across Farmers Branch
If you live in Farmers Branch and your gate won’t open, sags, or took a hit in the last storm, we can get it working again. Pinehurst Gate Repair is a dedicated gate specialist serving the full 75234 ZIP code, and we work on both manual and electric systems daily. The black clay soil here heaves every wet-dry cycle, so posts shift and gates rack out of alignment faster than people expect. Call us at (877) 265-5743 and we’ll send someone who actually works on gates in Farmers Branch, not a generalist who has to figure it out on your dime.
Why Pinehurst Gate Repair Is Farmers Branch’s Preferred Gate Repair Company
Most of our Farmers Branch customers find us after someone else failed to fix the real problem. The city’s older homes from the 1950s through 1970s and its small industrial parcels near the I-35E/Valwood corridor produce a specific mix of gate failures: sun-baked iron gates, clay-heaved posts, and storm-damaged operators. We work on the brand you already have, whether that’s a Mighty Mule on a backyard gate or a LiftMaster running a commercial slide. That matters in a small, built-out city like Farmers Branch, where almost every gate is already existing, already aged, and often custom-fit to a tight lot line.
Our team is led by Ronnie Beshears, and the crew working in Farmers Branch knows the difference between re-plumbing a post and just adjusting hinges, because clay soil makes that distinction every season. We don’t upsell replacements when a repair fixes the gate. And when a gate truly is beyond saving, we quote a full replacement on the spot, so you don’t start over with another contractor.
Styles & brands we work with
Wrought Iron Gate Repair in Farmers Branch
Wrought Iron Gate Repair in Farmers Branch usually means restoring an older ornamental gate on one of the ranch-style lots off Valley View or Marsh Lane. These gates are often 40 or 50 years old, custom-built for a specific opening, and baked by decades of North Texas sun. Most of what we do is structural: re-setting hinge posts that have leaned in the clay, re-plumbing the gate leaf, and welding snapped or rust-rotted pickets. In Farmers Branch, a typical wrought iron repair runs $150 to $450 for realignment and hinge work, and $250 to $800 when welding or section replacement is involved.
Post Re-Set and Re-Plumb
When a hinge post heaves out of level in Farmers Branch’s expansive clay, tightening hinge bolts alone won’t hold. We dig out the footing, re-set the post, and braced it square before repacking. On an older gate, that’s often the difference between another season of sag and a gate that swings true again.
Rust Repair and Reinforcement
Ornamental iron gates in Farmers Branch live outdoors through hail season and hard sun. Bottom rails rust first, and a rusted-through bottom rail makes the whole gate droop and drag. We cut out the bad section, weld in replacement stock, and reinforce the weak point rather than patching cosmetically.
Metal Gate Repair in Farmers Branch
Metal Gate Repair in Farmers Branch covers everything beyond decorative wrought iron: chain-link gates on the city’s small commercial parcels, aluminum driveway gates on 1970s homes, and steel pedestrian gates. We also work the heavy cantilever and rolling security gates along the industrial streets off I-35E. On the residential side, a bent tube-steel gate from a storm or a car tap usually costs $200 to $600 to straighten, weld, and realign. Commercial metal gate repair starts higher because of gate weight and hardware cost, commonly $400 to $1,200 for a track, wheel, or rack repair.
Hinge and Post Repair
Metal gates in Farmers Branch fail at the hinge before the panel. On chain-link and steel gates, we replace worn barrel hinges, re-set posts, and add gate frame reinforcement when the corner has cracked from repeated racking.
Weld and Straighten After Impact
We see plenty of gates bent by the city’s mature pecan and oak limbs after storms. Straightening a buckled metal gate and reinforcing it with welded gussets often costs less than sourcing a custom replacement, especially when the opening isn’t a standard size.
Trusted Brands We Service in Farmers Branch
We work on the brand you already have. Our technicians are experienced with LiftMaster, FAAC, Mighty Mule, and BFT equipment, among others, covering residential swing gates and commercial slide operators. Because we stock common board and arm parts for these brands, Farmers Branch repair jobs often move faster than if we had to order from a distributor. If your FAAC board has lost power after an electrical surge or your Mighty Mule arm won’t cycle, we can diagnose it the same visit and usually return with the part already in the truck.
See the difference
Before
After
Before
After
Before
AfterCommon Gate Repair Problems We See in Farmers Branch Homes
- Clay heave pushes posts out of plumb. Farmers Branch’s black clay expands when wet and shrinks when dry, so a hinge post that was level in May will lean by September. The gate racks, the latch stops meeting, and tightening the hinge bolts makes it worse. We re-set post footings and re-plumb the gate.
- Solid infill gates catch North Texas wind. Straight-line winds load a solid wood or metal-panel gate like a sail. That bends panels, shears hinge bolts, and overloads the operator clutch. After major wind events in Farmers Branch, we re-secure, re-square, and re-test the operator limits and safety edges.
- Fallen pecan and oak limbs crush gates and operators. The mature canopy in established Farmers Branch blocks drops limbs in storms. We repair the metal, replace the operator arm or board if it took the hit, and re-check entrapment protection so the gate closes safely again.
- Old custom gates don’t match off-the-shelf parts. Tight lots in Farmers Branch often mean non-standard gate widths and hardware spacing. We source or fabricate matching hinges, pickets, and operator brackets instead of forcing a modern kit onto a 1960s gate and leaving it half-right.
Pricing for Gate Repair in Farmers Branch, TX
In Farmers Branch, most manual gate repairs run $150 to $600. Electric gate repair typically lands between $275 and $800, depending on whether it’s a board swap, arm replacement, or full system diagnostic. Post re-sets in clay soil, with new concrete and compaction, add $250 to $500 to the job. A welded repair on a bent ornamental gate runs $200 to $700. Before any work starts, we quote the exact number and you approve it, so there are no surprise additions on the invoice. Call (877) 265-5743 for a free estimate.
We Also Serve Cities Near Farmers Branch
Pinehurst Gate Repair is a dedicated Gate Repair specialist for the whole metroplex, and we cover the cities bordering Farmers Branch. If you’re in Addison, Carrollton, University Park, or Highland Park, the same crew handles your gate work. Everything on this page about Farmers Branch applies to those neighborhoods too, minus the clay soil, which is worse in some places and easier in others.
Serving Farmers Branch, TX — Our Local Coverage Area
We’re based in the Farmers Branch area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Farmers Branch
Every automatic gate has a manual release mechanism, usually a pull handle or keyed release on the operator that disengages the drive so you can push the gate by hand. On LiftMaster and FAAC operators, it’s typically a small lever or cord on the motor housing. If high water or a downed line is near the gate, wait for power crews to finish. Otherwise, disengage and swing the gate open manually, then call us at (877) 265-5743 to inspect the board and safety edges before re-engaging power.
Because the post is moving in the clay, not the hinge. Farmers Branch sits on black expansive clay that swells when wet and shrinks when dry, so a hinge post heaves out of level within a season or two. Tightening hinge bolts on a leaning post just locks the rack in place. The fix is a post re-set: digging down, re-setting the footing, and re-plumbing the gate. That’s a regular repair for us in the 1950s-70s neighborhoods around Valwood and the I-35E corridor.
Yes. We work both sides of Farmers Branch, from the ranch homes in the established 75234 streets to the warehouse and light-industrial parcels off Valwood near I-35E. The same crew handles a Mighty Mule residential swing gate in the morning and a heavy cantilever slide gate on a commercial lot in the afternoon. It means we stock the right track wheels, rack, and board parts for both.
Yes, automatic gates in Texas must have entrapment protection: either photocells or contact edges that reverse the gate when something is in the path. You can check it by placing a solid object in the gate’s path and pressing the remote. The gate should reverse or stop. If it doesn’t, that’s a safety failure and should be fixed before regular use. We verify entrapment protection on every electric gate repair we do in Farmers Branch.
Most bent gates can be repaired, depending on where the bend is and whether the frame is kinked or just panel-bent. A straighten, weld, and reinforce job on a Farmers Branch ornamental gate often runs $300 to $700, which is usually less than sourcing a custom replacement. If the post below sheared in the clay, we quote the post re-set as part of the same repair. Call (877) 265-5743 and we’ll give you an honest read on repair vs. replace.
Written by Ronnie Beshears, Owner at Pinehurst Gate Repair, serving Farmers Branch and surrounding communities.