Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across Lavon
When a gate stops working in Lavon, it’s rarely a small inconvenience. It’s a security gap at the edge of your property, a car trapped in or out, and a problem that tends to get worse the longer it sits. We’re Pinehurst Gate Repair, and we work on gates in 75166 every week. Manual or electric, swing or slide, ornamental or farm – our team knows the specific failure points that show up in this part of North Texas. Call us at (877) 265-5743 and we’ll tell you what’s wrong, what it costs to fix, and when we can be there.
Why Pinehurst Gate Repair Is Lavon’s Preferred Gate Repair Company
Lavon isn’t a place where generic handyman fixes hold up. The soil here moves. The lake air eats at steel. And when a heavy custom gate goes out of alignment, the root cause is rarely what the homeowner thinks it is. That’s why our reputation in 75166 is built on diagnosing the footing and the hinge post before we touch the gate panel. Ronnie Beshears leads our crews, and the standard he sets is simple: find the actual cause, fix it so it stays fixed, and leave the gate operating the way it should.
We get called to Lavon because we work on the brand you already have – LiftMaster, FAAC, BFT, Viking, Ghost Controls, DoorKing, Mighty Mule, Linear, and Elite – and because we don’t sell replacement gates when a post reset and an operator tune-up solve the problem. Homeowners in Lavon’s HOA subdivisions and the acreage properties east of town both deal with the same underlying issues: shifting clay, rust, and operator boards that misdiagnose mechanical drag as a motor failure. Our multi-brand diagnostic experience means we arrive with a plan, not a guess.
From the lake-adjacent streets near Lake Lavon to the ranch-style properties further out, we treat every gate as what it is: the first line of property security. That’s the job. Back to secure, operating the way it should.
Styles & brands we work with
Wood Gate Repair in Lavon
Wood Gate Repair in Lavon is a different job than it is in most Texas towns, because the wood on your gate is sitting on top of the same expansive blackland clay that moves everything else. When a wooden gate drags, people usually blame sagging hinges or a warped panel. Often the post itself has shifted in the ground. We repair and replace rotted posts, reframe gates, swap out failed hinges and latch hardware, and re-hang panels so they close clean and latch tight. A typical wood gate repair in Lavon runs $180 – $450 depending on whether it’s a post reset or a full panel rebuild. Call us at (877) 265-5743 and we’ll quote the exact number before any work starts.
Post Resets and Frame Repair
The blackland clay under Lavon swells when wet and shrinks hard in summer, and that cycle can walk a wood fence post out of plumb in a couple of seasons. When we reset a gate post, we dig past the topsoil, set it in concrete below grade, and brace it so the panel hangs true again. If the gate frame is still square, this is often a same-visit repair.
HOA-Approved Gate Matching
Lavon’s newer subdivisions carry strict architectural guidelines. If your side-yard gate or driveway gate is listed in the HOA design standards, we match the original stile width, picket spacing, and hardware finish so the repair doesn’t stand out. That matters when the gate is visible from the street.
Driveway Gate Repair in Lavon
Driveway Gate Repair in Lavon almost always involves steel or ornamental iron, and those gates fail differently here than they do in Dallas or Plano. The panel might still be perfectly true, but a hinge post that’s tilted a few degrees will make a 14-foot ornamental gate drag hard across its arc. That’s the clay, not the gate. Repair scope ranges from hinge and roller replacement to full post re-plumbing and gate realignment, and most driveway gate repairs in 75166 run $250 – $600. Heavier custom gates with underground operators can push higher, but we quote everything upfront. Estimates are free. No work starts until you approve the number.
Ornamental Iron and Custom Steel Gates
Lavon’s high-end subdivisions around the lake have some genuinely heavy bespoke gates – arched top rails, scrollwork, laser-cut privacy panels. Those gates don’t tolerate sloppy realignment. We re-plumb the post, set the hinge gap right, and adjust the operator arm so the gate swings silent and square through the full cycle.
Manual and Automated Driveway Gates
Manual or electric, we work on both. If your gate is manual and dragging, the fix is mechanical. If it’s automated and the operator is fighting the gate, we diagnose the mechanical side first, then test the operator. A LiftMaster operator with a burned capacitor and a gate that’s binding at the hinge post are two different problems – and treating the wrong one costs money.
Trusted Brands We Service in Lavon
Your gate operator was chosen for a reason, and repairing it shouldn’t require replacing it with a different brand. We service nine major gate and operator brands including Linear, Viking, Ghost Controls, and DoorKing, which means we know the proprietary control boards, motor specs, and limit settings that generic technicians guess at. Whether your Viking swing arm has snapped a belt or your DoorKing slide operator isn’t reversing on the safety edge, we carry or source parts locally for Lavon customers and turn repairs around fast. No brand-swapping pitch. We fix the system you have.
Common Gate Repair Problems We See in Lavon Homes
- Hinge posts out of plumb. Blackland clay swells and shrinks hard enough that a post set level in a new subdivision can tilt within two seasons, causing a gate that drags and binds mid-swing while the panel is still straight.
- Lakeside rust on steel frames and hardware. Salt and humidity off Lake Lavon accelerate rust on steel gate frames, hinge pins, and the mounting posts for keypads and intercoms. We sand, treat, and repaint before rust becomes structural.
- Operator failures from dragging gates. A motor that’s dragging a misaligned gate runs hot and burns through capacitors or strips gears. The operator often isn’t the primary failure – it’s the load the clay forced on it.
- Wind-damaged rural gates. Spring straight-line storms hit the long driveway gates and farm gates east of Lavon hard. If the post footing wasn’t sized for wind load, the whole assembly twists. We re-set posts and re-square the frame so it holds in the next storm.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Repair in Lavon, TX
Gate repair in Lavon starts around $180 for simple hinge or latch replacements and runs to $600 or more for full post resets on heavy ornamental driveway gates. Rust remediation on a steel gate frame typically adds $150 – $350 depending on how far the corrosion has spread. Operator repairs – control board, capacitor, limit switch, or arm replacement – usually land between $200 and $500. The exact number depends on your gate, your operator, and the condition of the posts. We quote it before work begins, and the price we give is the price you pay. Call (877) 265-5743 for a free estimate.
We Also Serve Cities Near Lavon
Pinehurst Gate Repair is based in Rowlett and does regular work throughout the northeast Dallas suburbs. From this area, our crews serve Lavon along with Nevada, Royse City, Saint Paul, and Wylie. If you’re adjacent to Lavon and dealing with a gate that won’t open, won’t close, or won’t stay aligned, call us – we know the soil, the storm patterns, and the gate brands common to this corridor. For full details on the work we do, see our Gate Repair service page.
Serving Lavon, TX — Our Local Coverage Area
We’re based in the Lavon area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Lavon
It’s the clay under the post, not the gate panel. Blackland clay in 75166 swells when wet and shrinks hard in dry heat, and that cycle can tilt a hinge post enough to make a true gate drag across its arc. The fix is a post footing reset and re-plumb, not a new gate. Call (877) 265-5743 and we’ll check the post before recommending anything else.
Yes. Many Lavon subdivisions carry architectural standards governing gate material, color, picket spacing, and hardware finish. We match the original style and finish so the repair passes HOA review without drawing attention. Bring your design standards sheet if you have it; if not, we’ll match what’s already installed.
Start with the photo eyes and safety edges – if they’re misaligned or blocked, the operator will refuse to close. If those are clean, the problem is often mechanical: a gate that’s binding at the hinge or dragging on the ground can trip the obstruction sensor mid-cycle. Let a trained technician diagnose it, because a misaligned automatic gate can close with enough force to cause serious injury. Call us at (877) 265-5743 and we’ll check the whole system, not just the motor.
Yes, especially in the lake-adjacent subdivisions where humidity and salt accelerate corrosion. Surface rust becomes structural pitting faster than inland. We remove rust, treat the steel, and repaint with a protective coating matched to your existing finish. Small rust spots cost less than $300 to remediate; deeply pitted hinge posts may need replacement. Call (877) 265-5743 for a free estimate.
Yes. Solar openers on Ghost Controls and Mighty Mule systems are common on Lavon’s acreage and ranch properties, and we service them. We also repair chain-link, tube, and farm gates – including post resets sized to handle the straight-line winds that hit the open stretches east of town. Estimates are free.
Why Local Knowledge Matters: Lavon’s Clay, Lake, and Wind
If you search for “gate repair near me” in Lavon and call a company from Dallas that doesn’t know this soil, you’re likely to get a hinge adjustment that lasts about as long as the next rain. Lavon sits on North Texas blackland prairie, and the clay here is expansive – it swells in wet weather and shrinks so hard in summer that it cracks. A gate post set plumb in a new HOA subdivision can be visibly out of level within a couple of seasons. That’s not a construction defect. It’s the soil doing what this soil does.
That reality shapes how we work in 75166. A real sag correction starts at the hinge post footing, not the gate panel. In a lake-adjacent subdivision off the Lavon shoreline, our crew pulled a heavy ornamental steel swing gate that had been dragging for months. The owner assumed the LiftMaster operator was failing. The real culprit was a hinge post lifted and rotated by seasonal clay movement. We reset the post footing, re-plumbed the hinge post, did a full sag correction, then re-tuned the operator arm and confirmed the safety photocell and loop detector were live before we left. The gate now swings silent and square through the full cycle.
For the lakeside neighborhoods, add rust. Salt and humidity off Lake Lavon accelerate corrosion on steel frames, hinge hardware, and keypad entry posts. And for the acreage properties east of town, spring straight-line winds stress farm gates and long driveway gates whose original post footings had no wind load margin. None of this is guesswork. It’s what we see in Lavon week after week, and it’s why generic gate repair advice doesn’t hold up here.
Written by Ronnie Beshears, Owner at Pinehurst Gate Repair, serving Lavon and the surrounding North Texas communities.