Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Lowry Crossing, TX
Gate installation in Lowry Crossing usually means something different than it does in a planned subdivision ten minutes west. We’re installing long driveway swing gates on pipe posts, ranch entries on multi-acre tracts, and automatic openers that have to hold up to blackland clay soil and full Collin County sun. Most Lowry Crossing properties sit along FM 546, FM 3286, or the US 380 corridor, and the gate is the first working piece of the property anyone touches. If yours has failed or you’re planning a new entry, call Pinehurst Gate Repair at (877) 265-5743 and we’ll tell you exactly what’s involved before any work starts.
Why Lowry Crossing Homes Are Different
Lowry Crossing is unincorporated Collin County, which means no city inspector is coming to check your gate, and no municipal crew is a phone call away. The housing stock is custom homes and manufactured homes on multi-acre lots, with detached shops, barns, and metal outbuildings scattered behind long driveways. That changes the gate work. Most of what we service out here is heavy pipe-rail and ranch-entry gates mounted on pipe posts, not the decorative aluminum pedestrian gates you see in newer HOA neighborhoods.
The soil is the biggest variable we deal with. North Texas blackland clay swells when it rains and shrinks hard in summer heat. Posts shift. Gates sag. Hinges bind. An opener that worked fine in March can throw itself off-alignment by August because the post it’s bolted to has moved a quarter inch in the wrong direction. Add long, unshaded sun exposure along FM 546 and FM 3286, and control boards, keypads, and finish coatings wear out noticeably faster than they do on shaded suburban lots. Lowry Crossing gate work is less about cosmetics and more about alignment, load, and electrical resilience.
Styles & brands we work with
Our Main Lowry Crossing Services
The two calls we get most often from Lowry Crossing homeowners are gate repair and electric gate repair, so those each have their own detailed page on this site. Here’s the short version of each.
Gate Repair in Lowry Crossing
Most repair calls out here start with a gate that won’t close fully or scrapes the ground because the post shifted. On long rural driveways, the gate is heavy, the hinges take real load, and small alignment problems turn into dropped gates within weeks. We repair the mechanical side, hinges, rollers, tracks, arms, posts, and we work on the brand you already have. If your gate is sagging on a pipe post or dragging at the latch, the full breakdown, signs, and local pricing are on the Gate Repair in Lowry Crossing page.
Electric Gate Repair in Lowry Crossing
When an automatic opener stops responding to the keypad or the gate goes dead after a storm, the problem is usually electrical or control-board level. Lowry Crossing properties sit far enough out that a gate stuck open isn’t just annoying, it leaves the whole property exposed. We diagnose LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule systems, and fix both the low-voltage side and the mechanical side in one visit. Read what typical failures cost and when we can get there on the Electric Gate Repair in Lowry Crossing page.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Lowry Crossing
Most Lowry Crossing gate installations are done for one of three reasons: a new build or renovation on a multi-acre tract that never had an automated entry, an old manual ranch gate that the owner is tired of opening by hand, or a gate that’s finally beyond repair and needs full replacement rather than another patch job. The climate and soil here mean a new gate has to be set correctly the first time, deep posts, proper bracing, and an opener sized for the gate’s actual weight and wind exposure, not whatever was on sale. Whether you need a manual pipe-rail entry or a fully automated driveway gate with a keypad and safety edges, we handle the entire job from first measurement to final programming. Much of our installation process and the full scope of options are covered on our Gate Installation page, and we’re happy to walk a Lowry Crossing property before you commit to anything.
Automatic Gate Installation
Signs you need it
You’re getting out of the truck to open and close the gate every time you leave or come home, or the property has no controlled entry at all.
What it costs in Lowry Crossing
Automatic gate installation in Lowry Crossing typically runs $3,500 to $9,500 depending on gate size, opener type, and whether power already reaches the post.
How we do it
We set or brace the posts, hang and align the gate, mount the opener, run the low-voltage wiring, install the keypad and safety devices, then program and test the full cycle.
Driveway Gate Installation
Signs you need it
Your driveway is the primary entry and you want a controlled, secure opening that fits the property’s look without sagging on Collin County clay.
What it costs in Lowry Crossing
Driveway gate installation in Lowry Crossing typically runs $4,000 to $12,000, with the higher end covering heavy steel gates and operators built for long-term rural use.
How we do it
We measure the actual opening and slope, recommend a swing or slide configuration, set posts deep enough for clay movement, hang the gate, and install and tune the opener to travel smoothly.
What Gate Installation Costs in Lowry Crossing
| Item | Typical range in Lowry Crossing |
|---|---|
| Automatic gate installation | $3,500 – $9,500 |
| Driveway gate installation | $4,000 – $12,000 |
| Sliding gate installation | $5,000 – $14,000 |
Do I need a permit for a gate in Lowry Crossing?
Lowry Crossing is unincorporated, so there is no city permit office for a gate project. Collin County may have road or right-of-way rules if the gate sits near a county road, and we’ll help you check that before digging. For private driveways set back from the road, it’s usually straightforward.
Can you install a gate opener on my existing metal gate?
Usually yes, if the gate is structurally sound and the posts are stable or can be braced. We’ll assess the gate weight, the post condition, and power availability, and we’ll tell you honestly whether the opener can be added or whether the gate itself needs work first.
Brands We Service in Lowry Crossing
We’re factory-trained or hands-on experienced with nine major gate and operator brands, including FAAC, BFT, Linear, and Viking, so the opener you already have is the opener we’ll fix. We carry common control boards, keypads, and safety edges in our stock, and we can usually have harder-to-find parts ordered and in hand within days. See the full our brands list for everything we support.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Lowry Crossing, TX
| Service | Typical range in Lowry Crossing |
|---|---|
| Gate repair service call | $75 – $150 |
| Hinge replacement | $180 – $420 |
| Gate opener repair | $220 – $600 |
| Electric gate repair | $250 – $950 |
| Control board replacement | $350 – $900 |
| Keypad replacement | $180 – $450 |
| Automatic gate installation | $3,500 – $9,500 |
| Driveway gate installation | $4,000 – $12,000 |
| Sliding gate installation | $5,000 – $14,000 |
The two things that push a Lowry Crossing quote upward are post condition and power distance. If the blackland clay has shifted the posts, we build that correction into the price instead of pretending it doesn’t exist, and if the gate sits far from a power source, the wiring run adds material and labor. Every price is quoted and agreed before any work begins, so the number we give you is the number you pay.
Neighborhoods We Serve in Lowry Crossing
We work the full 75407 ZIP and the surrounding county roads, including the large-lot properties off FM 546, the FM 3286 corridor, the US 380 frontage, and the private lanes that branch off all three. Lowry Crossing is spread out, so we schedule by area to keep drive time down and response reasonable.
- Properties along FM 546
- FM 3286 corridor and side lanes
- US 380 corridor frontage
- Private driveways on county roads
- Multi-acre homestead tracts off CR 408
Service Area – Cities Near Lowry Crossing
We regularly serve Lowry Crossing and the surrounding Collin County area, and for homeowners or property managers with gates in nearby towns, we cover those too. If you’re in Fairview, TX, Nevada, TX, Lucas, TX, or Allen, TX, the same gate specialists handle your repair or installation. Same crew, same brands, same upfront pricing.
Serving Lowry Crossing, TX — Our Local Coverage Area
We’re based in the Lowry Crossing area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Lowry Crossing
We schedule Lowry Crossing calls by area and can usually get to most repair jobs within one to two business days. Emergency work is handled case by case, but a gate stuck open or a property left exposed gets priority on the schedule. Call (877) 265-5743 and we’ll give you a straight answer on timing.
Most Lowry Crossing properties are not in an HOA at all, since the community is unincorporated and largely made up of custom homes and manufactured homes on private tracts. If you are in a small subdivision with covenants, check your documents first. We’ll build to whatever the rules require, but out here it’s rarely an issue.
We serve all of 75407, including the FM 546, FM 3286, and US 380 corridors, plus the private roads and county lanes off each. We also handle gate work in Fairview, Nevada, Lucas, and Allen. If you’re not sure whether you’re in our area, call and ask, the answer is usually yes.
If your Lowry Crossing gate is sagging, dead, or not yet built, call Pinehurst Gate Repair at (877) 265-5743. We’ll talk through what’s actually wrong, quote a firm price, and get your entry back to operating the way it should.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Lowry Crossing Customers Say
"We had a hydraulic arm leaking fluid onto the driveway. Replaced, cleaned up the stain as best he could, and it's been dry for months."
— Arjun Reddy"Hinge post had rotted at the base and the whole swing gate was sagging into the concrete. He rebuilt the post rather than talking us into a whole new gate, which two other companies had pushed for."
— Renee Hayes"Reprogrammed every clicker in the HOA and set up the keypad codes. Patient with a very long list of residents."
— Rami Hassan