Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Talty, TX
Gate installation in Talty usually means one of two jobs: hanging a ranch-style pipe or tube gate across a long gravel driveway, or putting in a motorized entry gate that stands up to black-clay soil movement. Most Talty properties sit on acreage off FM roads and county lanes, so the work leans rural; posts set in deep concrete, bracing for cattle-panel and tube gates, and operators sized for heavy, wind-loaded gates rather than light decorative aluminum. If your gate is binding after a wet spring or you’re planning a new entry from scratch, call Pinehurst Gate Repair at (877) 265-5743 and we’ll take a look.
Why Talty Homes Are Different
Talty is unincorporated Kaufman County, east of the Dallas metro edge, and the gate work here follows the land. Properties sit on multi-acre tracts with long gravel or caliche driveways. The gate at the road is working infrastructure, not an HOA-approved ornament; you’re as likely to see a 12-foot pipe gate with a chain latch as a powder-coated iron driveway gate. That means repair and installation both start with the soil.
The black clay across this part of the county swells hard after spring rain and shrinks deep in summer drought. Gate posts heave, lean, and twist. A gate that swung fine in March binds by June because the hinge post has moved a half-inch out of plumb. We see this every year across Talty, and it changes how we set posts: deeper holes, more concrete, and bracing that tolerates ground movement instead of fighting it. If your gate is racked and dragging, the fix usually starts underground before we touch a hinge or latch.
Styles & brands we work with
Our Main Talty Services
Two calls dominate in Talty: gates that will not open or close properly, and electric systems that stopped responding. Here is what each involves locally.
Gate Repair in Talty
Most repair calls in Talty are farm and ranch gates that have racked out of square because the posts moved in the clay. We re-hang, re-square, and brace pipe and tube gates, replace sagging hinges, and rebuild gate posts that have heaved out of the ground. Whether it’s a cattle-panel gate on a back pasture or a driveway gate off an FM road, the repair usually means resetting the geometry, not just swapping hardware. Gate Repair in Talty covers the full scope of what we fix.
Electric Gate Repair in Talty
Automated gates in Talty work harder than their suburban counterparts: longer gates, more wind load, dustier conditions, and power that comes from a panel at the end of a long run. When a LiftMaster or FAAC operator fails here, it’s often a limit-switch issue from the gate racking, or a low-voltage wiring fault from the ground shifting under conduit. We diagnose the board, motor, and mechanical side together because in Talty they fail together. Electric Gate Repair in Talty explains the electric and control-board work in detail.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Talty
New gate installation in Talty is not a decorative afterthought. You’re building an entry that has to hold up to heaving clay soil, decades of sun, and daily use by trucks, trailers, and ranch equipment. Pinehurst Gate Repair has served Talty since 2013, and we set every gate for the ground it stands in. For the full scope of what we build, see Gate Installation.
Automatic Gate Installation
Signs you need it
You’re opening and closing a heavy gate by hand multiple times a day, or the property needs controlled entry at the road but the current gate has no operator.
What it costs in Talty
Automatic gate installation in Talty typically runs $2,800 to $9,500 depending on gate size, operator type, and the power run from the house or panel.
How we do it
We set the posts, hang the gate, mount the operator, run the low-voltage and line-voltage supply, and program the limits and safety settings so the gate stops and reverses the way it should on a long rural drive.
Driveway Gate Installation
Signs you need it
There is no gate at the road, and you want a secure, defined entry across the driveway that fits trucks and ranch traffic, not a narrow suburban gate.
What it costs in Talty
A new driveway gate in Talty typically runs $1,800 to $6,500 installed, with the spread driven by gate width, material, and whether it’s automated or manual.
How we do it
We measure the drive opening, set posts below the clay movement line, fabricate or order the gate to the opening, and hang it to swing freely with room for grade changes through the seasons.
What Gate Installation Costs in Talty
| Item | Typical range in Talty |
|---|---|
| Manual driveway gate installation | $1,800 – $5,200 |
| Automatic gate installation with operator | $2,800 – $9,500 |
| Sliding gate installation | $3,200 – $8,000 |
Do I need a permit for a gate in Talty?
Most rural gate installations on private acreage in unincorporated Kaufman County do not require a building permit, but setbacks from the road and any utility easements still apply. We check the right-of-way and easement lines before setting the first post.
Can you install a gate that works on a gravel driveway?
Yes. Gravel and caliche drives are the norm in Talty, and we design the gate travel and the post bracing around a surface that will shift and get re-graded over the years. Call (877) 265-5743 and we’ll measure the actual opening.
Brands We Service in Talty
We work on the brand you already have, plain and simple. Our techs carry parts and diagnostics for FAAC, BFT, Linear, and Viking operators, plus the mechanical hardware that every manual gate depends on. If your board is dead or your gate is racked, we’re set up to diagnose it the first trip. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Talty, TX
| Service | Typical range in Talty |
|---|---|
| Gate post reset or re-concrete | $350 – $900 |
| Manual gate re-hang and re-square | $250 – $600 |
| Hinge or latch replacement | $150 – $375 |
| Electric gate diagnostic call | $95 – $185 |
| Circuit board replacement | $325 – $850 |
| Operator or motor replacement | $700 – $2,400 |
| Safety sensor or photo eye replacement | $200 – $450 |
| Manual driveway gate installation | $1,800 – $5,200 |
| Automatic gate installation | $2,800 – $9,500 |
| Sliding gate installation | $3,200 – $8,000 |
What pushes a Talty job higher is usually the clay. A gate post that has to be dug out, re-set deeper, and re-braced costs more than a simple hinge swap. The other driver is drive length; a power run of 300 feet to a gate out at the road costs more than an operator mounted 40 feet from the panel. Whatever the number, you get the price before we start, and it does not change unless you approve a change in scope.
Neighborhoods We Serve in Talty
Pinehurst Gate Repair covers all of Talty and the surrounding Kaufman County acreage in ZIP code 75114. Most of our days are spent on FM roads, county lanes, and long private drives where the gate is the first thing you see from the gravel.
- Talty proper and the acreage tracts around it
- Properties along FM 1641 and connecting county roads
- Ranch and farm entries off FM 1390
- Long private drives and caliche lanes east of the Dallas county line
- Manufactured-home and rural outbuilding sites on multi-acre tracts
We schedule Talty calls in half-day windows, so we’re not rushing your job between five other stops. Emergency repair calls get put first in the queue when they come in.
Service Area – Cities Near Talty
Our work spans the rural edge of eastern Dallas and western Kaufman counties. If you need gate work in Seagoville, TX, Forney, TX, Travis Ranch, TX, or Balch Springs, TX, the same crew covers those routes.
Serving Talty, TX — Our Local Coverage Area
We’re based in the Talty area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Talty
We treat a gate stuck open or a gate that won’t latch as a security problem, not just an inconvenience. Talty calls are scheduled in half-day windows, and when a gate is standing open on a property with livestock or equipment, we’ll push the schedule to get there sooner.
We work on both, and in Talty the distinction barely exists. Pipe gates, tube gates, cattle-panel gates, and the heavy driveway gates on long rural entries are all standard work for us. Manual or electric, swing or slide, we’re set up for it.
Yes. Every job gets a written price before we touch the gate. If we open up a post or a control box and find something beyond the original scope, we stop and talk to you first. There is no surprise invoice at the end. For a free estimate, call (877) 265-5743.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Talty Customers Say
"Hinge post had rotted at the base and the whole swing gate was sagging into the concrete. He rebuilt the post rather than talking us into a whole new gate, which two other companies had pushed for."
— Renee Hayes"Reprogrammed every clicker in the HOA and set up the keypad codes. Patient with a very long list of residents."
— Rami Hassan"Photo eye was misaligned so the gate refused to close after dark. Ten minute fix. He also cleaned the lens and pointed out that the sprinkler head was spraying it every morning, which is why it kept happening."
— Claudia Torres