Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across Nevada
Gate repair in Nevada, TX usually means one of two things: a heavy ornamental iron driveway gate that’s sagging on its hinges, or a solar-powered opener that quit after the last storm. Either way, you want someone who can diagnose the real problem fast, because a gate that won’t close on a multi-acre tract isn’t just inconvenient. It’s a livestock escape waiting to happen. Our Gate Repair team works on the brands you already have, from LiftMaster and Mighty Mule operators to plain heavy pipe farm gates on masonry posts. Call us at (877) 265-5743 and we’ll get it back to operating the way it should.
Why Pinehurst Gate Repair Is Nevada’s Preferred Gate Repair Company
We’re gate specialists, not generalists. That distinction matters out here, because Nevada properties don’t come with subdivision-standard gates. Most of our calls around 75173 involve heavy ornamental iron swing gates on masonry posts, tube-steel farm gates on acreage, or solar-powered openers mounted on pipe posts at the end of a long driveway. This is different work than a Dallas HOA gate. The posts are bigger, the panels are heavier, and the soil underneath is expansive clay that shifts with every drought-and-rain cycle.
Ronnie Beshears leads our crew, and the team has hands-on experience across LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule systems. That brand-specific knowledge means we’re not guessing at a proprietary control board or motor spec. We know which FAAC board loses programming after a brownout and which Mighty Mule arm strips its gear under load. More importantly, we work on both the electrical side and the mechanical side. Manual or electric, swing or slide, we can usually fix what you have rather than sell you a whole new system.
When you call from Nevada, you’re talking to people who already know the area. We’ve worked properties off FM 1778, down toward the Lavon Lake side, and out along the county roads where driveways run a quarter mile before you see a house. That local knowledge shortens diagnostics. We know what the clay soil does to hinge post footings here, and we know what UV does to a south-facing keypad after five summers. That’s the difference between a repair that lasts and one that just resets the failure clock.
Styles & brands we work with
Metal Gate Repair in Nevada
Metal gate repair in Nevada covers a wide spectrum, from ornamental iron driveway gates to plain galvanized tube-steel farm gates. Most metal gates here are heavy, and that weight works against the hinges, the post footings, and the operator. A typical metal gate repair in Nevada runs $180 to $600 depending on whether we’re re-aligning a sagging panel, repairing a weld, replacing a hinge, or re-setting a post that’s pulled out of plumb in the clay.
Ornamental Iron Gate Repair
Heavy ornamental iron gates look great but hide problems well. The failure usually starts underground. In Nevada’s expansive clay, a masonry or pipe post can tilt half a degree per year, and one day the gate starts dragging and the operator stalls mid-cycle. We re-set the footing, correct the sag, and re-align the actuator arm so the operator isn’t fighting the gate’s own weight. Weld repair on wrought-iron scrollwork runs $120 to $350 depending on the joint and the prep work.
Weld and Rust Repair
North Texas humidity followed by long dry spells is rough on painted and powder-coated steel. We see rust at the bottom rail, at the hinge welds, and around the base of the posts on most metal gates older than ten years. We grind back the corrosion, weld any cracked joints, and re-coat the repair so it doesn’t come back next season. If you’re seeing rust bloom through the paint on your gate, call us before it becomes a structural issue. That’s an easy fix now and a bigger bill later.
Wood Gate Repair in Nevada
Wood gate repair in Nevada usually involves a cedar or pressure-treated driveway gate that’s warped, sagging, or pulling its hinges out of the post. Wood moves in this climate. Dry summers shrink it, thunderstorms swell it, and the freeze-thaw of occasional winter ice on a north-facing gate can split the bottom rail. A typical wood gate repair in Nevada runs $150 to $450, depending on whether we’re re-hanging the panel, replacing a rotten rail, adding a diagonal brace, or rebuilding the hinge attachment point.
Warped and Sticking Wood Gates
When a wood gate sticks and won’t latch, the usual culprit is moisture cycling. The panel swells in humid stretches and rubs against the latch post. You can shave the edge, but the fix won’t hold unless we also address the bracing. A diagonal cable brace with a turnbuckle lets us pull a sagging gate back to square without tearing the whole panel apart. That’s a $150 to $250 fix on most Nevada driveway gates.
Hinge and Post Repair
Wood gate posts set directly in the ground rot at the base even in a dry climate, because irrigation overspray and rain pooling around the base keep the bottom six inches wet. We set new posts in concrete, or better, in gravel-filled post holes that drain, which is the right detail for clay-heavy soils. On multi-acre tracts where the gate is the only thing keeping horses or cattle in, we’ll get the post replaced same day so you’re not left with a standing-open gap overnight.
Trusted Brands We Service in Nevada
We work on the brand you already have, which matters when your gate opener dies on a Friday afternoon. Our techs know LiftMaster and Mighty Mule inside and out, the two brands we see most often on Nevada acreage gates, and we also handle FAAC and BFT for heavier ornamental and commercial slide operators. Because we stock common control boards, safety photocells, and operator arms for these brands, we’re often able to complete the repair the same visit rather than ordering parts and coming back. If you bought the house with the gate already installed, don’t worry about tracking down the original installer. We’ll read the model plate and know exactly what it needs.
See the difference
Before
After
Before
After
Before
AfterCommon Gate Repair Problems We See in Nevada Homes
- Hinge post footings that shift in the clay. Expansive soil around 75173 pushes hard against masonry and pipe posts. The gate starts dragging, the operator strains, and eventually the panel won’t close at all. We re-set the post in gravel-drained holes and re-align the gate to fix the root cause, not just the symptom.
- Faded, dead, or failing safety photocells and keypad entry pads. Summer UV on a south-facing driveway post is unrelenting. We replace sensor pairs and keypads regularly out here, and reposition them where possible so the new unit isn’t staring into the same afternoon sun that killed the old one.
- Slide gate tracks bent or derailed by storm winds and ice. Long rural slide gates catch a lot of wind. After a spring thunderstorm or a January freeze, we find tracks knocked out of line, rack teeth stripped, and roller brackets bent. We straighten the track where it’s salvageable and replace the rack sections that aren’t.
- Solar opener failures on remote driveway gates. Nevada has a lot of gate openers running on solar panels and 12V batteries. A lightning strike or a week of overcast skies leaves you driving up to a dead gate. We test the panel output, the charge controller, and the battery bank, then replace exactly what failed.
Pricing for Gate Repair in Nevada, TX
Here’s what gate repair typically costs in the Nevada market. Basic service calls and diagnoses run $75 to $125. A hinge replacement on a standard driveway gate runs $150 to $300. A full gate realignment, including post adjustment and operator re-set, runs $200 to $500. Post replacement, including digging out the old footing and setting a new one, runs $250 to $600 per post depending on the depth and whether concrete or gravel is used. Weld repairs run $120 to $350. The price is quoted and agreed before any work starts. We don’t open a box or cut a single weld without you seeing the number first. Call (877) 265-5743 for a free estimate, and you’ll have a real figure to work with, not a vague range read over the phone.
We Also Serve Cities Near Nevada
Pinehurst Gate Repair handles gate work all over northeastern Collin and Rockwall counties. In addition to Gate Repair in Nevada, we regularly serve Lavon, Royse City, Fate, and Lowry Crossing. If your gate is acting up and you’re in one of those towns, call us at (877) 265-5743 and we’ll get you scheduled.
Serving Nevada, TX — Our Local Coverage Area
We’re based in the Nevada area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Nevada
The panel rarely stays straight because the post footing is moving underneath it. Nevada’s expansive clay soil swells and shrinks with every rain and drought cycle, and over time it pushes masonry and pipe posts out of plumb. Straightening the panel without re-setting the post is a temporary fix. We dig the post, set it in a gravel-drained footing that won’t hold water against the post, and then re-hang and align the gate. Call (877) 265-5743 if you’re tired of re-straightening the same gate every other year.
Yes. We handle this exact situation on Nevada acreage regularly. If the gate is stuck closed and the opener is dead, we can manually release the operator arm so the gate can be pushed open, then diagnose the solar panel, charge controller, battery, and operator board. The most common culprit after a storm is a fried charge controller or a battery that was already weak. We carry replacements for the common brands and can usually have the gate running on solar again the same visit.
If the gate was built or upgraded in the last couple of decades, it should have them. Photo-eyes, or safety photocells, are the sensors that stop a closing gate when something crosses the beam. They’re required under modern automated gate safety standards, and more importantly they’re the component that keeps a horse, a kid, or a delivery truck from being caught by a moving panel. If yours are dead, misaligned, or bypassed, we’ll replace and test them. Call (877) 265-5743 for an estimate on a sensor replacement.
We can, and we do it often out here. A heavy galvanized pipe gate on a ranch entrance needs the same post-setting and alignment work as an ornamental driveway gate, but the access often means working around livestock and uneven ground. We’re comfortable with both. The pricing is similar, though very heavy gates sometimes need a second set of hands and a portable lift, which we’ll include in the quote before we start.
Release the operator arm from the gate and try pushing the gate by hand. If it moves freely through the full arc, the gate itself is mechanically fine and the issue is in the operator, the control board, or the power supply. If it binds, drags, or won’t move, the operator was probably fighting a mechanical failure and may have burnt out doing it. We begin every diagnostic with exactly this test because it separates mechanical issues from electrical ones in about two minutes. If you’re not sure how to release your specific operator safely, call us instead. On a heavy gate, releasing a LiftMaster or Mighty Mule arm under load can be dangerous if you don’t know the mechanism. Call (877) 265-5743 and we’ll come out and diagnose it properly.
Written by Ronnie Beshears, Owner at Pinehurst Gate Repair, serving Nevada and the surrounding Collin County area.