Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGhost Controls Gate Repair in Dallas, TX | Pinehurst Gate Repair
We provide Ghost Controls repair in Highland Park and across Dallas, TX as an independent service provider, not a manufacturer-authorized shop. That independence matters because we diagnose the whole gate, not just the board. The biggest difference in Dallas is the clay soil: gate posts heave, gates go out of plumb, and Ghost Controls arms bind mid-travel. If your opener is faulting, call (877) 265-5743 and we’ll find out whether it’s the board or the footing before you spend a dime on parts.
Our team works on Ghost Controls equipment in Dallas service area neighborhoods and the surrounding burbs, and we’re Ghost Controls sales & service specialists, not a general handyman crew that happens to own a multimeter. From battery and solar issues to arms that reverse for no apparent reason, we’ve seen it. The fix is usually more straightforward than the symptom suggests.
Why Dallas Residents Choose Us for Ghost Controls Service
Most gate companies in Dallas will tell you they work on “all brands.” We actually do. Ronnnie Beshears, our owner, spent years getting hands-on with swing gates, slide gates, and the specific ways LiftMaster, FAAC, and Ghost Controls boards misbehave. He grew up in Rowlett near Lake Ray Hubbard and learned electronics and mechanical systems at Eastfield College in Mesquite. That background means when your Ghost Controls TSS1 arm reverses mid-travel, we’re not guessing. We’re checking the limit settings, the arm geometry, and the post that’s probably moved.
We stock common Ghost Controls boards, arms, limit switches, and battery harnesses, and we’re honest about when an OEM part is your best option versus when a quality aftermarket battery will outlast what came in the box. You get one call, no runaround, no “we don’t work on those” response at the front door.
If your gate’s acting up, there’s a reason. Let’s find it.
Styles & brands we work with
Common Ghost Controls Gate Repair Problems We Solve in Dallas
- Gate faulting on obstruction. Your Ghost Controls swing arm starts fine, then reverses and blinks an obstruction code. In Dallas, this is frequently not an obstruction at all. It’s a hinge post that heaved in the clay and threw the gate leaf out of alignment. The arm binds mid-travel and the controller reads it as something in the way. We re-set the post or re-align the arm before anyone replaces a board.
- Solar kit dead by late summer. Ghost Controls solar-powered openers use sealed lead-acid batteries. Dallas summers with week after week above 100°F bake those batteries, and by August or September the remote gets nothing. A new battery gets the gate moving again, but if the panel angle or charge controller isn’t right, you’ll be back in the same spot next year.
- Arm anchor pulling loose. Older East Dallas and Oak Cliff homes often have original driveway gates with footings poured decades ago, shallow and cracked. The Ghost Controls operator arm anchor wallows out the mounting holes on the gate frame, and the whole assembly starts to shift. Tightening bolts is a stopgap; a real repair means new anchor placement and often a fresh footing.
- Limit switch and control board faults after storms. Spring storm surges and the occasional North Texas freeze hit Ghost Controls boards hard. You’ll see arms that reverse direction unexpectedly, limits that won’t latch, or gates that open fine but refuse to close. We test the board inputs before condemning anything, because a $12 limit switch is a lot cheaper than a $200 board.
- Slide gate rack misalignment on new construction. In newer Dallas infill lots, the driveway apron settles and the rack-and-pinion on a Ghost Controls slide unit drifts out of alignment. The motor stalls, the rack teeth wear unevenly, and eventually the whole slide operator gets blamed. We re-align the rack and re-set the drive gear so the motor stops fighting itself.
Ghost Controls Service in Dallas: What Local Conditions Mean for Your Equipment
Here’s the thing about Dallas that doesn’t show up in a Ghost Controls manual: our expansive clay soil swells when it’s wet and shrinks when it’s dry, and it does both every single year. A gate post set in a shallow footing in an older East Dallas yard, ZIP 75206 or 75228, might sit perfectly plumb through a wet spring. Then the summer heat bakes the clay, the ground pulls away from the footing, and the post leans just enough to bind the Ghost Controls arm at mid-travel. The controller faults out on obstruction, the homeowner assumes the motor is shot, and a perfectly good operator gets replaced when the real fix was a post re-set and arm re-alignment. This pattern doesn’t exist in the same way in Richardson or Plano, where the soil composition shifts but not as aggressively. In Dallas, before you spend money on Ghost Controls parts, you need someone who will check the geometry first. That’s the difference between a $400 board replacement and a $200 post repair.
Ghost Controls Models & Products We Service in Dallas
We service the full Ghost Controls lineup you’re likely to have on a Dallas driveway: the TSS1-family Heavy-Duty Single Swing kits, TDS2-family Dual Swing kits for double gates, Solar-Powered Swing Opener kits with battery and panel, and the TSD-family rack-and-pinion slide openers. We source genuine Ghost Controls control boards, arms, limit switches, and battery harnesses where the OEM part is the reliable fix, and we use quality aftermarket batteries, keypads, and receivers where they hold up just as well for less money. For solar kits, we’ve found that a good aftermarket AGM or lithium-compatible battery outlasts the original sealed lead-acid in most Dallas summers. We’ll tell you which one makes sense for your setup.
See the difference
Before
After
Before
After
Before
AfterGhost Controls Service Pricing in Dallas
Ghost Controls repair in Dallas typically runs $150 to $450 depending on what we find. A limit switch replacement or battery swap sits at the low end. A control board replacement on a TSS1 or TDS2 usually lands between $250 and $400 with the part included. A full post re-set and arm re-alignment, which is a common recommendation in clay-heavy Dallas neighborhoods, costs more because it involves concrete work, not just electronics. Every price is quoted and agreed before we touch a single component. Call (877) 265-5743 for a free estimate on your Ghost Controls system.
Serving Dallas, TX — Our Local Coverage Area
We’re based in the Dallas area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Ghost Controls Gate Repair in Dallas
Usually not. The motor on a Ghost Controls swing arm is a DC gearmotor, and while heat degrades everything eventually, afternoon-only faults in Dallas typically point to thermal expansion of the gate leaf or the arm geometry shifting as the metal heats up. We test the motor draw and the arm path before we call it. Call (877) 265-5743 for a diagnostic.
Yes. We frequently repair Ghost Controls control boards by replacing failed limit-switch circuits, relay inputs, and battery harness connectors. We only recommend a whole-kit replacement when the board, arm, and motor are all past their service life and the numbers don’t make sense.
Wet spring weather in Dallas means the clay expands, post footings shift, and the gate leaf can drag or bind. The solar panel keeps charging, but the operator faults out because the arm is fighting the new geometry. Once the ground dries and the post settles, the fault may disappear, which is misleading. The underlying alignment issue is still there. A post re-set and arm re-alignment fixes it for good. Call (877) 265-5743 for a quote.
We work on the whole gate. Ghost Controls arms can’t function on posts that have moved, and in Dallas, posts move every year. We dig out cracked footings, re-set posts in deeper concrete, re-plumb the gate leaf, and re-align the operator arm. It’s all one job to us, because treating only the electronics would be ignoring the actual problem.
Yes. We install wired and wireless keypads, intercoms, and extra receivers on existing Ghost Controls openers. We’ll match the accessory to your board’s input ratings and the gate’s duty cycle. Call (877) 265-5743 and we’ll tell you what fits your specific model.
Service Areas Near Dallas
Our work in Dallas takes us through East Dallas, Oak Cliff, and the Design District. We also service Ghost Controls in University Park, Rowlett, Garland, Sachse, Rockwall, Heath, and Sunnyvale. If you’re out there, call (877) 265-5743 and we’ll get you on the route.
Also see Ghost Controls service in Lowry Crossing and Ghost Controls service in Fairview for specific coverage in those areas.
Book Your Ghost Controls Service in Dallas Today
If your Ghost Controls gate is acting up in Dallas, call (877) 265-5743. We’ll diagnose the real problem, quote the fix, and get your gate back to operating the way it should.
Written by Ronnie Beshears, Owner at Pinehurst Gate Repair, serving Dallas, TX.