Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Dallas, TX
Gate installation in Dallas means working with the city’s mix of 1920s bungalows, mid-century ranches, and new-construction townhomes, each with very different entry points and hardware. The clay soil here shifts seasonally and summer heat routinely passes 100°F, so a gate that gets installed without accounting for post movement will be binding within two years. We handle full automatic and manual gate installation across Dallas, from design through final programming, and you can reach us at (877) 265-5743 to talk through your project.
Why Dallas Homes Are Different
Dallas sits on expansive clay that swells after spring rain and shrinks through dry summer heat. That cycle pushes shallow-set gate posts out of alignment, and we see the worst of it where older homes meet newer additions: East Dallas bungalows around 75206 often have gate posts set decades ago in thin concrete that has long since cracked. By August, those posts have shifted enough that a gate that swung freely in March now drags across the driveway.
Then there’s the heat itself. Wood gates in Dallas warp faster than nearly anywhere in Texas because the city regularly strings together weeks above 100°F with little overnight relief. Metal gates expand enough to bind against frames and strike plates. And the housing stock is genuinely split: historic neighborhoods like Oak Cliff and East Dallas have original wrought-iron pedestrian gates that need fabrication and welding, while Uptown and the Design District are filling in with tight-lot townhomes where automatic driveway gates have to fit against property lines and underground utilities. We plan every installation around those realities – post depth below the clay line, clearance for thermal expansion, operators rated for sustained heat.
Styles & brands we work with
Our Main Dallas Services
Most calls we take in Dallas fall into two buckets: a gate that has stopped operating correctly and needs repair, or an automated gate that has lost power, stopped responding to remotes, or started reversing mid-cycle. Here’s what each involves.
Gate Repair in Dallas
Our Gate Repair in Dallas work covers manual and automatic gates – bent hinges, sagging frames, broken welds, roller and track failures on slide gates, and post re-sets. On older Dallas properties, we often find the post is the problem even when the hinge looked like the culprit. We re-set posts in concrete deep enough to survive the clay movement that shifted the original footing. From a single pedestrian gate in Oak Cliff to a heavy driveway gate in Preston Hollow, we bring the welding and fabrication equipment with us so most repairs finish in one visit.
Electric Gate Repair in Dallas
Automated gates add control boards, limit switches, loop detectors, safety edges, and motors on top of the mechanical hardware. Our Electric Gate Repair in Dallas work starts with diagnosing whether the failure is electrical or mechanical – a gate that opens but won’t close completely is often a limit switch, not a motor problem. Dallas heat shortens the life of capacitors and control boards, especially on west-facing installations with no shade. We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule systems, so we’re not learning your operator’s wiring from scratch.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Dallas
Gate installation here means sizing the post footings for Dallas clay, not just for the weight of the gate. We’ve taken over jobs where posts set three feet deep still shifted within two seasons because the concrete was poured against undisturbed clay that swelled around it. Every installation we do in Dallas accounts for soil movement, drainage, and thermal expansion – and for the reality that older lots in places like East Dallas and Oak Cliff may have narrow easements or mature tree roots that change the layout. A new gate has to work on day one and still swing true after a wet spring and a 105°F August. You can read more about our Gate Installation process, or call (877) 265-5743 to get a site assessment started.
Automatic Gate Installation
Signs you need it
You want keypad, remote, or intercom entry at your driveway, or you’re replacing an automatic gate that has failed beyond practical repair.
What it costs in Dallas
Automatic gate installation in Dallas typically runs from $3,500 to $12,000 depending on gate size, operator type, and electrical work required.
How we do it
We set and brace the posts below the clay line, hang and align the gate, then mount the operator, run low-voltage wiring to your power source, and program remotes, keypads, and safety loops before testing the full cycle with you on site.
Driveway Gate Installation
Signs you need it
You need a new driveway gate, either manual or automated, sized and built for daily use at your Dallas property.
What it costs in Dallas
Driveway gate installation in Dallas generally falls between $2,500 and $10,000 depending on gate material, width, and whether automation is included.
How we do it
We measure the driveway opening and setback, fabricate or source the gate to spec, set posts at a depth that resists clay movement, and install all hinges, tracks, or rollers before final alignment and testing.
What Gate Installation Costs in Dallas
| Item | Typical range in Dallas |
|---|---|
| Manual gate (single swing) | $1,200 – $4,500 |
| Automatic gate (single swing, operator included) | $3,500 – $12,000 |
| Driveway gate (double swing, automated) | $5,000 – $15,000+ |
Dallas jobs push toward the higher end when posts need to be set deeper because of clay movement, when the gate has to be fabricated to fit a non-standard opening, or when the electrical panel is far from the gate.
Do you handle the electrical and safety edges on a new gate?
Yes. We run low-voltage wiring from your panel to the gate, install safety edges and photo eyes, and wire loops if you want vehicle detection. The full electrical scope is included in the quoted price, not handed off to a separate electrician.
What does a full gate installation include in Dallas?
It includes site measurement, gate fabrication or sourcing, post setting below the clay line, hardware mounting, operator installation if automated, wiring, and programming. You approve the total price before any work starts, so there’s no surprise on the final invoice. Call (877) 265-5743 for a firm quote.
Brands We Service in Dallas
We work on the gate operator you already have, not just the brands we sell. That includes Linear and Viking slide-gate operators on commercial properties, Ghost Controls and DoorKing on residential driveways, plus LiftMaster, FAAC, BFT, Elite, and Mighty Mule. We stock common boards, remotes, and safety edges locally, which keeps most Dallas repairs off the parts-delay list. See our brands page for the full lineup.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Dallas, TX
| Service | Typical range in Dallas |
|---|---|
| Hinge replacement (pair) | $180 – $380 |
| Post re-set (manual gate) | $400 – $850 |
| Roller or track repair (slide gate) | $250 – $600 |
| Weld repair (steel or wrought iron) | $200 – $500 |
| Control board replacement | $350 – $900 |
| Operator motor replacement | $600 – $1,800 |
| Limit switch or safety edge repair | $180 – $420 |
| Manual gate installation (single swing) | $1,200 – $4,500 |
| Automatic gate installation (single swing) | $3,500 – $12,000 |
| Driveway gate installation (double swing, automated) | $5,000 – $15,000+ |
Dallas tends to push repair costs up when a gate post has shifted enough that the hinge or track can’t simply be replaced – the post re-set becomes the real job. You’ll get a fixed quote before any work begins, so the price we agree on is the price you pay.
Neighborhoods We Serve in Dallas
We work across Dallas proper, from the older bungalow blocks of East Dallas and Oak Cliff to the newer builds in Uptown, the Design District, and Preston Hollow. Many calls come from HOAs managing shared entry gates, and from infill builders putting automatic driveway gates on tight lots.
- East Dallas (75206, 75214)
- Oak Cliff (75203, 75208)
- Uptown (75204, 75201)
- Preston Hollow (75220, 75230)
- Design District (75207)
We typically reach most Dallas neighborhoods within one to two business days for scheduled service, and we prioritize calls where a gate is stuck open and security is the immediate concern.
Service Area – Cities Near Dallas
Our Dallas work regularly spills into the neighboring cities where homeowners face the same clay soil and heat, but with smaller grids and their own HOA quirks. We serve Highland Park, TX, University Park, TX, Richardson, TX, and Mesquite, TX, plus the full Dallas ZIP range including 75242, 75201, 75202, and 75203.
Serving Dallas, TX — Our Local Coverage Area
We’re based in the Dallas area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Dallas
For scheduled repairs, we’re typically on site within one to two business days across Dallas. If a gate is stuck open and the yard or driveway is exposed, let us know when you call (877) 265-5743 and we’ll prioritize the visit. We don’t quote same-day service as a blanket promise; we schedule real appointments and keep them.
It depends on the neighborhood. Many Dallas HOAs, especially in gated communities and newer subdivisions, require design review and permits before a new driveway gate goes in. We can point you to the right paperwork and install to the specs your HOA or the City of Dallas requires, but approval is between you and whoever governs the property.
We cover the full Dallas area, including 75242, 75201, 75202, and 75203, plus the surrounding cities. If you’re inside the Dallas city limits or in one of the nearby cities we serve, we can schedule the work. Call (877) 265-5743 and we’ll confirm your address is in our service area.
If your gate is sagging, stuck, or completely automated and completely dead, call Pinehurst Gate Repair at (877) 265-5743. We’ll diagnose the real problem, quote the repair before we touch a tool, and get your gate back to operating the way it should.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Dallas Customers Say
"Fixed the immediate problem. He was honest that the operator is near end of life and I should budget for a replacement, which I appreciate even if it wasn't what I wanted to hear."
— Marco Rodriguez"We had a hydraulic arm leaking fluid onto the driveway. Replaced, cleaned up the stain as best he could, and it's been dry for months."
— Arjun Reddy"Hinge post had rotted at the base and the whole swing gate was sagging into the concrete. He rebuilt the post rather than talking us into a whole new gate, which two other companies had pushed for."
— Renee Hayes