Farm & ranch
Wrought iron
Wood & steel frame
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Travis Ranch, TX
Gate installation in Travis Ranch almost always means replacing a builder-grade wood-and-steel gate that’s reached the end of its life, or adding a new automated system to an existing entry. Most homes here were built between the mid-2000s and 2010s with the same standard steel frames on 4×4 or 6×6 posts set in concrete, so we know exactly what we’re working with before we even arrive. The blackland clay soil underneath Travis Ranch shifts with every wet-dry cycle, which means a new gate has to be set and braced differently here than it would in sandy-soil areas east of Dallas. Call Pinehurst Gate Repair at (877) 265-5743 and we’ll give you a straight answer on whether your gate is worth repairing or replacing.
Why Travis Ranch Homes Are Different
Travis Ranch is a master-planned community where nearly every home was built with the same builder-grade driveway gate. That’s not a knock on the construction, it just means gate repair here is almost always about fixing identical failure points across hundreds of matching gates: sagging hinges, rusted weld seams, worn opener arms. We don’t see much one-off custom ironwork in Travis Ranch the way you’d find in older Forney or Kaufman. Instead, we see the same three or four problems repeating across the neighborhood, which means we’ve learned to diagnose them fast.
The soil is the other constant. North Texas blackland clay expands when wet and contracts when dry, and it does this with surprising force. After a heavy rain, the clay under Travis Ranch gate posts swells and pushes posts out of alignment. The telltale sign is a gate that drags on one corner only during wet spring months. If you’ve noticed that, the post has likely shifted, not the hinge. We reset posts in Travis Ranch with the clay movement in mind, not just the gate’s weight. That changes how we set the concrete and how we brace the post during curing.
Styles & brands we work with
Our Main Travis Ranch Services
Most calls we get from Travis Ranch fall into two categories: a gate that won’t swing or slide properly, or an electric gate that’s stopped responding to remotes, keypads, or sensors. Both are covered below.
Gate Repair in Travis Ranch
Manual gates in Travis Ranch fail in predictable ways. Hinges sag, weld seams rust through, and posts set in that shifting clay lose their plumb. We repair the mechanical side of gates regardless of brand or age, and because we see so many of the same builder-installed gates across Travis Ranch, we usually know the weak points before we inspect. If your gate drags, binds, or won’t latch, Gate Repair in Travis Ranch covers the full scope of what we do.
Electric Gate Repair in Travis Ranch
Automated gates add a control board, a motor, safety sensors, and a remote or keypad into the mix, and any one of those can fail independently of the gate itself. In Travis Ranch, we regularly find opener arms that have worn out from fighting the same soil-related post shift that causes manual gate drag. Electric Gate Repair in Travis Ranch covers board-level diagnostics, motor replacement, and sensor realignment for the brands we support.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Travis Ranch
A new gate in Travis Ranch is usually either a direct replacement for a builder-grade gate that’s rusted through at the welds, or an upgrade from a manual gate to a fully automated system. Because so many homes here share the same original gate design and post setting, we can typically quote a replacement accurately after one visit. The clay soil is the variable that matters most: we set posts deeper and brace them longer than a general fencing crew would, specifically to resist the swelling that happens after spring rains. Whether you’re replacing a worn-out gate or adding automation for the first time, Gate Installation is a job we handle end to end, from tear-out to final programming.
Electric Gate Installation
Signs you need it
You’re tired of getting out of the car to open the gate, or you want controlled access for deliveries, guests, and kids coming home from school.
What it costs in Travis Ranch
Electric gate installation in Travis Ranch typically runs $3,000 to $7,500 for a complete system with a new operator, and $1,200 to $3,000 for the automation components when the gate itself stays.
How we do it
We mount the operator, run the low-voltage power from a nearby outdoor outlet or dedicated circuit, install the safety sensors and keypad or remote setup, and then set the open and close limits, testing the full cycle several times on both dry and wet ground days when possible.
Driveway Gate Installation
Signs you need it
The existing gate has rusted through at a weld seam, the post has heaved so far out of plumb the gate binds, or the frame is so thin it flexes when opened by hand.
What it costs in Travis Ranch
Driveway gate installation in Travis Ranch typically runs $2,500 to $6,500 for a standard steel-frame wood-insert gate sized for a single driveway, with wider or heavier assemblies at the upper end.
How we do it
We remove the old gate and hardware, check the posts for plumb and integrity (resetting them if the clay has shifted them), then hang the new gate with hinges rated for its full weight and verify it swings level before we leave.
Sliding Gate Installation
Signs you need it
Your driveway slopes toward the house or your setback doesn’t leave room for a swinging gate, so a rolling slide gate on a track is the workable option.
What it costs in Travis Ranch
Sliding gate installation in Travis Ranch typically runs $4,000 to $9,500 for a rolling gate with track, supports, and an operator, with the track prep and motorized gear accounting for much of the spread.
How we do it
We prepare a level track bed, set the support posts and rollers, hang the gate so it rolls without binding, and if it’s motorized, pair the operator with the gate’s travel path and safety stop settings.
What Gate Installation Costs in Travis Ranch
| Item | Typical range in Travis Ranch |
|---|---|
| New driveway gate (manual) | $2,500 – $6,500 |
| Electric gate system (complete) | $3,000 – $7,500 |
| Automation added to existing gate | $1,200 – $3,000 |
Do you handle the power run and safety edges?
Yes. We run the low-voltage line from an outdoor outlet or a dedicated circuit and install the required safety edges or photo sensors so the gate reverses if it meets resistance. Call (877) 265-5743 for a quote that covers the full install, not just the gate.
How long does a gate installation take in Travis Ranch?
Most standard driveway gate replacements take one day once materials are on site. Automated systems with new power runs or post resets in shifting clay can run two days, and we’ll tell you before we order parts.
Brands We Service in Travis Ranch
We work on the brand you already have. Our techs carry hands-on experience with FAAC, BFT, Linear, and Viking operators, which covers a wide share of what’s installed in Travis Ranch. We keep common control boards and sensor parts in stock locally, so a board-level repair doesn’t wait on a week-long ship. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Travis Ranch, TX
| Service | Typical range in Travis Ranch |
|---|---|
| Gate repair (manual) | $175 – $450 |
| Electric gate repair | $200 – $600 |
| Driveway gate installation | $2,500 – $6,500 |
| Electric gate installation (complete) | $3,000 – $7,500 |
| Automation added to existing gate | $1,200 – $3,000 |
| Sliding gate installation | $4,000 – $9,500 |
| Gate post reset | $300 – $700 |
| Weld repair | $150 – $350 |
What pushes a Travis Ranch job to the upper end is usually soil movement: a post that’s heaved out of plumb takes longer to reset properly than one that’s still square. Whatever we quote, you’ll get the number before any work starts, and we don’t change it mid-job unless the gate condition is materially different from what we quoted.
Neighborhoods We Serve in Travis Ranch
We cover all of Travis Ranch, including the newer phases east of the main entry and the earlier sections closer to the boundary with Forney. Since so many homes here share the same gate design, we’re usually able to schedule a visit within a day or two of your call.
- Travis Ranch Phases 1 – 3
- Travis Ranch North
- Travis Ranch East
- Sections along Clements Drive
- Areas adjacent to the Travis Ranch community center
Service Area – Cities Near Travis Ranch
If your property sits just outside Travis Ranch, we also cover the surrounding areas. We regularly work in Forney, TX for older custom gates, Sunnyvale, TX for acreage entries, Talty, TX for newer rural properties, and Seagoville, TX for both residential and light commercial work.
Serving Travis Ranch, TX — Our Local Coverage Area
We’re based in the Travis Ranch area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Travis Ranch
Most Travis Ranch calls are scheduled within one to two business days. If a gate is stuck open or a vehicle is blocked in, call (877) 265-5743 and we’ll fit you in as an emergency call that same day when possible.
Possibly. Travis Ranch has an active HOA structure, and some phases require architectural review for changes to front-facing structures. We can’t submit for you, but we can give you the specs and a drawing if the HOA asks for one.
We cover all of Travis Ranch and the adjacent cities including Forney, Sunnyvale, Talty, and Seagoville. If you’re unsure whether you’re in our area, call (877) 265-5743 and we’ll confirm it in under a minute.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Travis Ranch Customers Say
"Hinge post had rotted at the base and the whole swing gate was sagging into the concrete. He rebuilt the post rather than talking us into a whole new gate, which two other companies had pushed for."
— Renee Hayes"Reprogrammed every clicker in the HOA and set up the keypad codes. Patient with a very long list of residents."
— Rami Hassan"Photo eye was misaligned so the gate refused to close after dark. Ten minute fix. He also cleaned the lens and pointed out that the sprinkler head was spraying it every morning, which is why it kept happening."
— Claudia Torres