Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Electric Gate Repair Across Carrollton
Electric gate repair in Carrollton typically runs $180 – $540 depending on whether the problem sits in the motor, the control board, or the gate itself. Most jobs in Carrollton are done the same day we arrive because our techs carry boards, capacitors, and arm assemblies for the brands already installed across 75006, 75007, and 75010. If your gate won’t open, grinds mid-cycle, or stopped responding to the remote after last night’s storm, call us at (877) 265-5743 and we’ll talk through what you’re seeing before anyone gets in a truck.

We’re Electric Gate Repair specialists, not a garage door company that dabbles in gates. That distinction matters in Carrollton, where the majority of automatic gates in the older neighborhoods are retrofits on 30-year-old wood or light steel frames. These systems fail differently than new-build gates, and the fix usually involves both the mechanical side and the low-voltage controls.
Why Pinehurst Gate Repair Is Carrollton’s Preferred Electric Gate Repair Company
Carrollton homeowners and property managers call us because we diagnose the actual fault rather than swapping parts until something works. In the 75006 and 75007 subdivisions especially, a gate that sags and grinds is rarely just a worn hinge. The expansive clay under those neighborhoods has been moving posts for decades, and if the footing’s heaved, no amount of hinge adjustment holds for long. We know that pattern block by block, and we tell you when a post reset is the honest fix instead of a temporary adjustment.
Ronnie Beshears, our lead tech, has worked on LiftMaster, Linear, Viking, Ghost Controls, and DoorKing operators across North Texas. That hands-on time means we’re not guessing at proprietary control boards or motor specs. Our Carrollton customers call us back because they get a straight answer about what’s wrong, what it costs, and whether the gate is worth repairing or should be replaced. And we’ll tell you if replacement is smarter before quoting a repair that won’t last.
We service all four Carrollton ZIP codes: 75006, 75007, 75010, and 75011. Whether you’re near Josey Lane in 75007, off Rosemeade Parkway, or in the newer infill sections of 75010, we know the housing stock and the gate systems that were commonly installed.
Styles & brands we work with





Automatic Gate Repair in Carrollton
Automatic gate repair in Carrollton means restoring a system that has both a mechanical side and an electrical side, and almost every older Carrollton gate needs work on both. The opener may have burned out trying to push a warped or sagging gate, or the gate may have pulled the operator arm out of alignment as the post heaved. Our technicians diagnose both sides before touching anything, because fixing the motor without fixing the gate that killed it just sets you up for another failure in six months.
Most automatic gate repairs in Carrollton fall between $220 and $480, but the price depends on whether we’re replacing a capacitor, swapping a control board, or resetting a post and realigning everything that mounts to it. A full post reset with re-hanging the gate and realigning the operator runs higher, typically $600 – $1,100 in the older 75006/75007 blocks where footings were poured shallow.
Operator Realignment After Storm Damage
Spring hail and the wind gusts that come through Carrollton can knock an operator arm out of true or bend the rack on a slide gate. When the gate still opens but fights itself, the motor draws excess current and the board eventually fails. We realign the arm or rack, verify the limit settings, and run the gate through multiple cycles to confirm the motor isn’t already damaged from running against resistance.
Photocell and Safety Edge Repairs
Carrollton’s automatic gates need working entrapment protection, which for most retrofitted residential systems means photocells and sometimes a reversing edge. If the gate stops closing and reverses for no apparent reason, the photocell lenses may be misaligned from wind or a bumped post, or the wiring may be damaged. We test sensor alignment, check for voltage at the board, and replace worn safety-edge strips when they’ve cracked from UV exposure.
Electric Gate Motor in Carrollton
An Electric Gate Motor in Carrollton works harder than it should when the gate it’s attached to has warped, sagged, or shifted on its posts. We see this constantly in the 75007 neighborhoods off Old Denton Road and along Rosemeade, where 1990s wood privacy gates on original steel frames are still holding up but the openers are being asked to move a gate that’s no longer square. The motor’s armature, capacitor, and limit switches all take the abuse.
A typical gate motor replacement in Carrollton runs $320 – $520 for the motor itself, with labor adding another $150 – $300. If the motor burned out because the gate is binding, we won’t install a new motor on a gate that’s still fighting itself. We fix the gate first, then install the motor, because that’s the only sequence that gives you a repair that lasts.

Capacitor and Control Board Diagnostics
When a Carrollton gate opener hums but won’t start, or trips its internal breaker, the problem is often a failed start capacitor or a power surge that took out the control board. Summer thunderstorms and the power flickers that come with them are hard on gate boards. We bench-test the board, verify the transformer output, and replace only the failed component rather than quoting a full operator replacement.
Remote and Keypad Reprogramming
After a board replacement or a power surge, Carrollton homeowners often find their remotes and keypads no longer communicate with the operator. We reprogram existing remotes, clear and set new access codes, and install new receivers when the original unit has failed. This is a quick fix compared to motor work, usually $95 – $180, and we handle it on the same visit whenever possible.
Trusted Brands We Service in Carrollton
We work on the brand you already have. That’s the core of our service philosophy, because Carrollton gates span three decades of installations and the brand landscape is all over the map. Our techs are trained and experienced on Linear, Viking, Ghost Controls, DoorKing, LiftMaster, FAAC, BFT, Elite, and Mighty Mule. Whether your LiftMaster swing arm is stuck mid-cycle or your Viking board lost power after a surge, we know the wiring, the dip-switch layouts, and the board revisions for these systems. We stock common replacement boards, capacitors, and receiver modules for the brands most often installed in Carrollton homes, which means faster turnarounds and fewer return trips for parts.
See the difference
Before
After
Before
After
Before
AfterCommon Electric Gate Repair Problems We See in Carrollton Homes
- Shallow footing failure in 75006 and 75007. Posts were often set in shallow concrete that the expansive black-clay soil has heaved over decades. A gate that drags or binds at the latch often needs the post footing reset, not just a hinge adjustment.
- Warped wood gates from North Texas heat and UV. Summer sun dries and warps wood privacy gates, which pulls them out of square with the operator. The motor then works against resistance and fails early.
- Post-storm misalignment after hail and high winds. Spring storms bend light metal gate frames and knock operator arms out of alignment. Rack and pinion damage and loop detector failures are common after a hard wind year.
- Power surge damage to control boards. Carrollton’s thunderstorm season brings voltage spikes that cook circuit boards on gate openers. A gate that worked before a storm and won’t respond afterward is often a board issue, not a motor issue.
Pricing for Electric Gate Repair in Carrollton, TX
Here’s what Carrollton homeowners can expect to pay, in honest ranges rather than vague promises. Gate motor replacement: $320 – $520 for the motor, plus $150 – $300 labor. Control board replacement: $180 – $420 including diagnostics. Post reset with re-hanging and operator realignment: $600 – $1,100 in the older neighborhoods. Photocell or safety sensor replacement: $120 – $240. Remote or keypad reprogramming: $95 – $180. Any quote you get from us is the price you pay; we agree on the number before any work starts, and we don’t add surprise line items. Call (877) 265-5743 for a free estimate on your specific gate.
We Also Serve Cities Near Carrollton
While this page focuses on Carrollton, our technicians regularly service gates in Electric Gate Repair in Carrollton‘s neighboring cities. We cover Addison and Farmers Branch just south of Carrollton, Plano to the east along the Bush Turnpike, and University Park further south. If you manage a property in one of those areas and need a gate specialist, we can usually schedule you within the same week.
Serving Carrollton, TX — Our Local Coverage Area
We’re based in the Carrollton area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Carrollton
In Carrollton’s 75006 and 75007 neighborhoods, a gate that needs constant adjustment almost always has a footing problem rather than a hinge problem. The expansive black-clay soil expands and contracts with seasonal moisture, heaving shallow-set posts out of plumb. Each adjustment buys a few months until the soil moves again. The permanent fix is resetting the post in a deeper footing, ideally with concrete that extends below the active clay zone. Call (877) 265-5743 and we’ll assess whether your gate qualifies for a post reset versus repeated adjustments.
Every automatic gate operator has a manual release, but the location and mechanism vary by brand and model. On most LiftMaster and Viking swing operators, there’s a release handle or key on the operator housing; on Ghost Controls units, you’ll find a pull cord or a keyed release. The important safety point: disconnect the operator before attempting to move the gate manually, and never try to force a gate that’s binding, because a sagging gate under tension can shift suddenly. If you’re unsure where your release is, call us and we’ll walk you through it and schedule a visit to service the gate so it works when you need it again.
Check the circuit breaker and the GFCI outlet your operator is plugged into; power surges from hail storms often trip these. Then look at your control board for visible charring or a burnt smell, and check whether the photocells are still aligned, since hail or wind can knock them out of position. If the gate has power but won’t respond to the remote, don’t keep pressing the button, as a shorted board can damage other components. Call us at (877) 265-5743 and we’ll diagnose the storm damage and quote the repair.
Yes. Automatic gates in Carrollton must have entrapment protection that meets UL 325 safety standards, which for residential gates typically means photocells, a reversing edge, or both. These protections are required for any gate that opens and closes automatically, regardless of when it was installed. If your gate’s safety sensors are damaged or bypassed, the gate is out of compliance and should be repaired. We check entrapment protection on every automatic gate we service in Carrollton.
In most cases we can repair it, provided the wood itself isn’t rotted through at the hinges or the frame isn’t split. The sag usually comes from a heaved post, not from the wood failing. We reset the post footing, perform a sag correction, and realign the LiftMaster operator arm and limits. If the wood is too far gone, we’ll tell you straight and give you a written price for a replacement gate built for Carrollton’s climate. Call (877) 265-5743 and we’ll give you an honest assessment.
If your electric gate in Carrollton won’t open, grinds, or stopped working after the last storm, call Pinehurst Gate Repair at (877) 265-5743. We’ll talk through what’s happening, give you a free estimate, and get your gate back to secure.
Written by Ronnie Beshears, Owner at Pinehurst Gate Repair, serving Carrollton and surrounding North Texas communities.