Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGhost Controls Gate Repair in Carrollton, TX | Pinehurst Gate Repair
If your Ghost Controls opener is stalling, reversing, or dead at the post, here’s the short version: we’re an independent Ghost Controls service provider that repairs AR-series swing operators, TDS dual-swing kits, TS slide operators, and the solar/battery systems that run them all across Carrollton. The difference in Carrollton is that most Ghost Controls failures here start underground, in the black-clay soil that heaves gate posts out of plumb. Call (877) 265-5743 and we’ll diagnose the actual cause, not just reset the board and hope it holds.
Why Carrollton Residents Choose Us for Ghost Controls Service
Most gate companies can swap a battery. Few can tell you why your AR-series board keeps faulting when the panel reads full charge, or why the arm binds every August but works fine in February. That’s the work we do. We service Ghost Controls sales & service across nine operator brands, but Ghost Controls units show up constantly in Carrollton because they’re popular on the light steel and aluminum driveway gates this city retrofitted in the 1990s and 2000s.
Ronnie Beshears, our owner, got his start in electronics and mechanical systems at Eastfield College before spending years on swing gates, slide gates, and everything LiftMaster and FAAC produce. When a Ghost Controls operator misbehaves, he and the techs look at the whole system: board, arm geometry, battery health, solar output, and post plumb. We don’t guess at proprietary control boards. We read the fault, test the circuit, and fix what’s actually wrong.
Styles & brands we work with





Common Ghost Controls Gate Repair Problems We Solve in Carrollton
- Solar charging faults after prolonged summer heat. A Ghost Controls solar panel in full North Texas sun can degrade to the point where the panel output drops below what the AR-series board needs. The operator faults out mid-cycle, and owners assume the motor is dead. We test the panel, the charge controller, and the battery before recommending anything.
- Arm and bracket bind from heaving gate posts. Carrollton’s expansive clay swells in spring and shrinks in summer. A post that was set shallow and now sits out of plumb changes the arm’s travel geometry. The operator strains, limit switches never fully seat, and the gate reverses or stalls. This is the most common Ghost Controls repair we see in the 75006 and 75007 neighborhoods.
- Limit-switch and encoder drift after hail or high wind. Spring storms in Carrollton bend light metal gate frames and knock operators out of alignment. An AR-series board that suddenly reverses halfway through travel is usually reading a shifted limit or encoder position, not a bad motor. We re-square the gate, verify the arm angle, and recalibrate.
- Corroded battery terminals and shallow-conduit wiring. On many older Carrollton retrofit installs, low-voltage wire runs through conduit that fills with water after heavy rain. Corrosion creeps into the harness, voltage sags, and the opener behaves erratically. We trace the run, replace the harness, and seal the conduit.
- Keypad and accessory failures on AX-series entry systems. Carrollton’s summer heat and periodic freezes crack keypad housings and degrade wiring in the access loop. If the opener runs fine from the remote but not the keypad, the problem is usually in the accessory circuit, not the operator.
Ghost Controls Service in Carrollton: What Local Conditions Mean for Your Equipment
Here’s what we see block after block in the older 75006 and 75007 subdivisions: gate posts were commonly set in shallow concrete footings back when these neighborhoods were built, and North Texas black-clay has been heaving them out of plumb for decades. A Ghost Controls operator that "just needs adjusting" usually needs the post reset first. If the post isn’t plumb, the arm will never track true, the limit switches will keep tripping, and you’ll be on a first-name basis with every gate tech in the county. We’ve worked homes near Rosemeade Parkway where a single AR-series swing opener would run the gate open but stall and reverse before closing, which is why our Ghost Controls in Addison team sees similar patterns. The fix wasn’t a new board. It was resetting the hinge post in a deeper footing, re-squaring the gate, and replacing a corroded battery harness. The operator cycled cleanly on the first test after that. Spend money on electronics before fixing the structure and you’ll do it again in a year.
That pattern is specific to Carrollton. Neighboring cities have their own issues, but the combination of 30-plus-year-old gates, shallow footings, and expansive clay is concentrated in the original suburban blocks here in a way you don’t see as much in newer construction to the north.
Ghost Controls Models & Products We Service in Carrollton
We work on the AR-Series single swing gate operators, including the AR1550 and AR2000-style kits that show up on thousands of Carrollton driveway gates. We also service the Heavy-Duty Dual Swing TDS-series, the TS-series slide gate operators, and Ghost Controls solar/battery accessory kits, AX-series entry keypads, and receiver boards. When parts matter for compatibility, we use Ghost Controls OEM control boards, arms, and harnesses. For batteries, solar panels, and keypads, we typically recommend quality aftermarket options that cost less and often outlast the originals. We keep common Ghost Controls parts on hand for faster turnaround across Carrollton’s ZIP codes, and our Ghost Controls service in University Park can usually source anything unusual within a business day.
See the difference
Before
After
Before
After
Before
AfterGhost Controls Service Pricing in Carrollton
Ghost Controls gate repair in Carrollton typically runs $150 to $400 for common field repairs like limit-switch recalibration, battery replacement, or arm realignment. Control board replacement on an AR-series unit generally runs $280 to $500, depending on the board revision and whether solar components are involved. Full post reset work starts around $350 and goes up with concrete depth, gate size, and access. A new Ghost Controls opener installation with all hardware typically runs $1,200 to $2,800. Every job gets a written price before any work starts, so you know the number before a wrench turns. Call (877) 265-5743 for a free estimate. We’ll come out, test the system, and give you a number.
Serving Carrollton, TX — Our Local Coverage Area
We’re based in the Carrollton area and know this community well through Carrollton Gate Repair. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Ghost Controls Gate Repair in Carrollton
Almost never. That symptom in Carrollton usually means the arm geometry changed because a post shifted in the clay, or the limit switch drifted after a storm pushed the gate frame out of square. We test the board, the arm, and the post before touching the motor. Call (877) 265-5743 and we’ll find out for sure.
North Texas heat degrades solar panel output and battery capacity at the same time, so a system that charged fine in May can fault out in August. The panel may still look fine while producing too little current for the board’s demand. We test panel output under load and replace panels or batteries as needed.
Yes, as long as the structure is sound. On older Carrollton gates, we’re honest: if the post is heaved out of plumb, a new board or arm will only hold if the post is reset first. We’ll tell you what the gate needs structurally before recommending any electronics.
Both. We use Ghost Controls OEM boards, arms, and harnesses where compatibility matters. For batteries, solar panels, and keypads, we recommend quality aftermarket parts that often cost less and last longer. We’ll show you the difference and let you decide.
It can. Hail dents light metal frames and high wind whips them out of square, which throws off limit switches and makes the opener reverse or stall. After any major storm in Carrollton, check whether the gate closes fully without binding. If it doesn’t, call (877) 265-5743 and we’ll re-square and recalibrate before the strain kills a board.
Service Areas Near Carrollton
We run Ghost Controls repair calls throughout Carrollton’s 75006, 75007, 75010, and 75011 ZIP codes. We also cover Ghost Controls service in Farmers Branch just to the southeast, plus Ghost Controls service in Rowlett, Garland, Sachse, and Rockwall. If you’re on the edge of Carrollton or in a neighboring city, call and we’ll let you know our next open slot.
If your gate’s acting up, there’s a reason, let’s find it.
Book Your Ghost Controls Service in Carrollton Today
Call (877) 265-5743 and we’ll schedule a free estimate at your Carrollton home. Same-day and next-day appointments are available for emergency repairs, and the price is quoted and agreed before any work starts.
Written by Ronnie Beshears, Owner at Pinehurst Gate Repair, serving Carrollton service area and surrounding communities.