Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Highland Park, TX
Gate installation in Highland Park means matching the architectural standards of a deed-restricted enclave where driveways are framed by stone piers, wrought iron, and mature live oaks, not just hanging a metal panel off a post. We’re Pinehurst Gate Repair, and we’ve served Highland Park since 2013 as gate specialists. Every job in the 75205 ZIP carries the same reality: North Texas black clay moves under these estate lots, the summer heat cooks control boards, and the Town’s design expectations mean a new gate has to look like it was always there. Call (877) 265-5743 when you need a gate that opens right and belongs to the house.
Why Highland Park Homes Are Different
Highland Park is a nearly fully built-out enclave of 1920s through 1960s estate homes, which means the gates we install and repair are almost always hung on existing masonry. Original brick and stone piers, many of them settled or cracked after decades of expansive black clay shifting beneath them. That soil is the defining condition of gate work in Highland Park: summer drought pulls moisture out and piers lean outward, then rain returns and the clay swells, pushing them the other way. Gates sag out of plumb, latches stop meeting, and operator arms bind against posts that moved.
The second condition is heat. Operator housings and control boards sit exposed to direct North Texas sun for months, and the plastic and solder inside them age fast. Storm season adds another layer: spring hail and high winds knock gates out of alignment or strike hardware hard enough to snap hinge welds. And unlike newer suburbs where everything is a track-home standard, Highland Park gates are custom: wrought iron, wood-clad, steel frames hung on brick, often with a second service gate on the alley. Repairs here are rarely a simple part swap. They’re about restoring an entry that looks deliberate.
Styles & brands we work with
Our Main Highland Park Services
Most calls in Highland Park fall into two categories: a main driveway gate that won’t open or close properly, and an automated system that’s lost power, lost its limits, or stopped recognizing its remotes. Both jobs live on the same custom-built entries, and both need someone who knows gate mechanics and gate electronics as one system.
Gate Repair in Highland Park
Mechanical gate repair in Highland Park almost always starts with the piers. Hinges tear loose from settled stone, latch bars no longer line up, and heavy custom-fabricated gates pull their posts out of vertical. We re-plumb posts, re-hang leaves, re-weld broken pickets, and replace worn rollers and tracks on slides. On alley service gates, the enemy is often ivy and oak shade: moisture holds against steel, rust moves in, and hinge pins wear oval. Gate Repair in Highland Park means getting the gate square, secure, and smooth again without touching the look of the entry.
Electric Gate Repair in Highland Park
Automated systems fail in predictable Highland Park ways: sun-baked boards, lightning and surge damage after spring storms, safety loops that were installed before modern UL 325 standards, and photo-eyes that drift out of alignment as piers move. We diagnose at the board level across LiftMaster, FAAC, BFT, Linear, Viking, DoorKing, Elite, Mighty Mule, and Ghost Controls, which means we find the actual fault fast instead of throwing parts at the problem. Electric Gate Repair in Highland Park covers the low-voltage side: control boards, safety edges, loop detectors, remote programming, and the limit and force settings that keep an automatic gate from becoming a hazard.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Highland Park
New gate installation in Highland Park almost always means working around existing stone piers, preserving a brick-and-iron estate fence line, and producing something a design-review board and the neighbors will accept as original to the house. On a pre-war or mid-century lot, that’s a custom-fabricated steel or iron frame sized to the existing opening, finished to match the home’s hardware and paint, and hung so it clears the ground even when the clay moves. On newer builds, it means a clean new entry with automation designed in from the start. We handle the full job: fabrication specs, pier reinforcement, hinge selection, operator mounting, and safety systems. Pinehurst Gate Repair is a gate specialist, not a general contractor, and Gate Installation is what we do every week.
Automatic Gate Installation
Signs you need it
You’re still opening the driveway by hand on an estate lot, or the old opener died and no one makes parts for it.
What it costs in Highland Park
Automatic gate installation with operators and safety edges typically runs $4,700 to $14,500 depending on gate weight, pier condition, and the operator brand.
How we do it
We reinforce or replace the mounting pier, hang the gate leaf with hinge and latch hardware sized for its actual weight, mount the operator on a steel post or pier plate, run low-voltage conduit to the control box, and set limit, force, and safety-loop parameters before final testing.
Driveway Gate Installation
Signs you need it
The existing driveway gate is rotted, rusted through, sagging beyond repair, or was never built to hold an operator in the first place.
What it costs in Highland Park
New driveway gate fabrication and installation ranges from $4,200 to $12,800 depending on width, material, and whether you’re automating it at the same time.
How we do it
We measure the actual opening and the pier faces, specify the frame and infill material to match the home’s era, fabricate or order the leaf, hang it on adjustable hinges, and set the latch and drop rod so the gate works manually and can be automated later without rework.
Sliding Gate Installation
Signs you need it
The driveway has no room for a swing leaf, or the opening is wide enough that a swing gate would stress its piers and sag within a few seasons.
What it costs in Highland Park
Sliding gate installation typically runs $5,800 to $15,500 depending on the track length, gate panel weight, and whether an operator is included.
How we do it
We set a concrete track base or cantilever frame, hang the gate panel on the truck and guide rollers, adjust the guides for the existing driveway grade, and if automated, mount the operator and install the safety loop and photo-eye path protection.
What Gate Installation Costs in Highland Park
| Item | Typical range in Highland Park |
|---|---|
| Standard residential gate installation | $2,800 – $9,000 |
| Automatic gate installation with operators | $4,700 – $14,500 |
| Driveway gate fabrication and installation | $4,200 – $12,800 |
These ranges assume a workable existing opening and piers. Highland Park jobs run higher when piers need reconstruction, when the design calls for matching custom ironwork, or when the old opener is so far out of current safety standards that the entire low-voltage path needs replacing.
Do you handle the power run and safety edges on a new automatic gate in Highland Park?
Yes. We run the low-voltage power and control wiring from the house or a dedicated circuit, install the UL 325 required safety edges and photo-eyes, and set the force and limit parameters before we call the gate done. Call (877) 265-5743 for a written quote that includes all of it.
Can you match a new gate to the original wrought iron on a 1930s Highland Park home?
We coordinate with local fabricators to match picket profiles, finial styles, and paint finish so the new gate reads as part of the original entry. The mechanical and electrical work is ours; the final look gets the same attention. Estimates are free.
Brands We Service in Highland Park
We service FAAC, BFT, Linear, and Viking operators, plus the rest of the major residential and commercial brands. That means we usually have the correct control board, receiver, or limit switch on the truck instead of waiting on a distributor. See our brands for the full list. We work on the brand you already have.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Highland Park, TX
| Service | Typical range in Highland Park |
|---|---|
| Basic gate repair | $160 – $380 |
| Automatic gate repair | $240 – $520 |
| Gate opener repair | $190 – $410 |
| Control board replacement | $250 – $500 |
| Standard residential gate installation | $2,800 – $9,000 |
| Driveway gate fabrication and installation | $4,200 – $12,800 |
| Automatic gate installation with operators | $4,700 – $14,500 |
| Sliding gate installation | $5,800 – $15,500 |
Highland Park prices run toward the upper end when piers have shifted and need re-plumbing before a gate can be rehung cleanly, and when custom ironwork or wood cladding has to be matched to an original entry. Whatever the job, the price is quoted and agreed before any work starts.
Neighborhoods We Serve in Highland Park
We cover the entire 75205 ZIP, from the estate blocks west of Preston Road down through the alley-served lots east of Lakeside Drive and everything around the Dallas Country Club. Highland Park’s layout, with main driveways on the street and service gates on the alleys, means we’re as often behind the house as in front of it.
- Old Highland Park
- Lakeside Drive corridor
- Bordeaux Avenue estates
- St. Johns Drive area
- Armstrong Parkway vicinity
Response in Highland Park is typically same-day or next-morning for a stuck or unsafe gate, and a no-rush repair call can usually be scheduled within the week.
Service Area – Cities Near Highland Park
Pinehurst Gate Repair is headquartered in Rowlett and works the full corridor around Highland Park and its neighbors. We handle gate repair and installation in Dallas, TX, the adjoining neighborhoods of University Park, TX, north into Richardson, TX, and west over to Farmers Branch, TX. If your gate is in one of these cities and you’d like a specialist to look at it, call (877) 265-5743.
Serving Highland Park, TX — Our Local Coverage Area
We’re based in the Highland Park area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Highland Park
For a gate that won’t close, is stuck open, or has come off its track, we schedule same-day calls in Highland Park whenever possible, and most non-emergency service visits land within a day or two. A gate that can’t secure a property is treated as urgent. Call (877) 265-5743 and we’ll tell you when we can be there.
Because Highland Park is deed-restricted and the Town reviews changes to front-facing structures and site walls, a new gate or a major change to an existing one may need design approval before work starts. Repairs that restore the existing gate in kind generally don’t. We can advise you on which bucket your job falls into before you commit.
Yes. Many Highland Park properties run two gates, and it’s common for the alley gate’s operator or safety loop to fail before the front one. We service both from the same visit, which often saves a second trip charge when the front gate is also acting up.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Highland Park Customers Say
"Control board fried after a lightning storm. He showed me the burn mark on it, quoted the board, and installed a surge protector on the line so it hopefully doesn't happen again."
— Sofia Flores"Gate stopped halfway and sat there for two days blocking the driveway. He found a dead capacitor in the operator, had one with him, and we were moving cars again in under an hour."
— Heather Rhodes"Solar panel on our remote gate wasn't keeping the battery up through the winter. He repositioned it, replaced the battery, and explained the math on why the old placement was never going to work."
— Diego Reyes