Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateTrusted Gate Installation for Rowlett Homeowners
A new gate in Rowlett changes how your property works day to day. It’s the difference between a driveway that anyone can wander up and a front entry that opens only when you want it to. We install swing gates, slide gates, driveway gates, and full electric systems with openers that work on the brand you already have or one we source for you. Pinehurst Gate Repair is a gate specialist, not a generalist home-service company. Led by Ronnie Beshears, our team works on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule equipment. If you’re weighing a new install or replacing a gate that’s past repair, call (877) 265-5743 for a free, no-obligation estimate.
Key Takeaways
- Gate installation in Rowlett covers manual and electric options. Swing, slide, driveway, and custom fabricated gates are all in scope.
- We work on the brand you already have. Nine major gate and opener brands, including DoorKing, Linear, and Viking.
- Every estimate is free and written. Price is agreed before any work starts, so there’s no surprise invoice at the end.
- One contractor from measuring to final wiring. If your old gate is beyond repair, you don’t start over with another company.
Styles & brands we work with
Automatic Gate Installation
Automatic gate installation means a gate that opens and closes on its own, triggered by a remote, keypad, key fob, or vehicle sensor. In Rowlett, where a growing share of homes and ranches sit on larger lots, an automatic gate removes the daily hassle of getting out of the car in the rain or after dark to muscle a heavy gate open. We install the full system: gate hardware, operator arm, control board, safety edges, photo eyes, and the low-voltage power run. Projects vary by length of run, gate weight, and operator brand, but most Rowlett automatic gate installations fall between $3,500 and $9,800 all in. See our Gate Installation pricing for more detail on what drives the cost. Every quote is written, and the price is agreed before any work starts.
Control and Access Options
You decide how the gate opens. Keypads, remotes, phone-based controllers, and vehicle loop detectors are common on Rowlett properties, and we can wire the system for more than one access method. We’ll show you the options, including a battery backup so the gate still opens during the power outages that spring storms in North Texas bring.
Safety Systems Built In
Automatic gates carry real risk if the safety edges and photo eyes aren’t installed and calibrated right. UL 325 compliance is mandatory on residential automatic gate systems, and our installs follow it to the letter. We set entrapment protection zones, test reversal force, and verify the operator stops and reverses when it should.
Gate Installation Services
Gate installation services cover everything from sourcing and building the gate to hanging it, wiring it, and handing you the remote. Rowlett homeowners call us for three broad reasons: a new gate on a newly built home, a replacement for a gate damaged by a vehicle or years of North Texas weather, or an upgrade from a manual gate to an electric one. Pinehurst Gate Repair handles Gate Installation in Rowlett under one roof, which means you don’t make one call for the gate and another for the opener and another for the concrete pad. A typical manual gate installation in Rowlett runs $1,800 to $5,500. Adding an operator and controls pushes the project to the $3,500 to $9,800 range, depending on gate size and length of the power run. The price is quoted and agreed before work begins.
Manual Gate Installation
Manual swing or slide gates suit properties where access control isn’t the main goal, just perimeter definition and visual privacy. We fabricate and hang steel tube, wrought iron, and wood-frame gates sized to your opening. Hinges, posts, latches, and drop rods are installed to hold up under wind load, which matters in Rowlett where spring storms push hard against large flat surfaces.
Full Replacement Work
When a gate is too far gone to repair, the installation job starts with an honest assessment of what’s salvageable. Sometimes the posts are still solid and only the gate leaf needs replacing; sometimes the whole assembly comes out. Either way, we quote the replacement scope clearly, handle removal, and set the new gate to operate square and smooth.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Electric Gate Installation
Electric gate installation is the process of taking a gate, whether new or existing, and adding the motor, control board, safety components, and wiring that make it open automatically. It’s the most requested Gate Installation – Sachse area service we perform in Rowlett, because manual gates are fine until the hundredth time you get out in the Texas heat to swing one open. We run the low-voltage line from the house or a dedicated transformer, set the operator on a proper pad, and program the control board to your remotes. In Rowlett, electric gate installation typically costs $3,500 to $9,800, with the operator brand, gate weight, and distance from the nearest power source driving the final number. You’ll have the written price before we start.
Operator Brands We Install
We stock and install Linear, Viking, Ghost Controls, and DoorKing operators, among others. If you already have a brand you know, we’ll work with it. If you don’t, we’ll recommend the operator that matches the gate’s weight and duty cycle instead of selling you the most expensive unit on the shelf.
Low-Voltage Wiring Done Right
The wiring is where cheap installs fall apart in Rowlett’s climate. We bury low-voltage cable at proper depth, protect connections from moisture, and don’t leave exposed splices that fail within a season. The work is clean enough that a future repair call is simple to diagnose.
Driveway Gate Installation
Driveway gate installation is the full project: a gate across your vehicle entrance, built or sourced to fit, hung on posts set to handle the load, and optionally automated. In Rowlett, driveway gates are common on larger residential lots, ranch properties on the east side of town, and homes that back up to open land. We start by measuring the opening and checking the lay of the land, because a driveway that slopes or has a curve changes what gate design will work. Most Rowlett driveway gate installations run $1,800 to $5,500 for a manual gate and $3,500 to $9,800 with automation. You get a detailed written quote before any work starts.
Matching the Gate to the Driveway
A swing gate needs level ground and room to arc open; a slide gate needs a straight run to the side. We’ll tell you which works on your specific Rowlett driveway and why. No point forcing a swing gate onto a steep slope and living with the sag.
Site Prep and Post Setting
This is the part that determines whether the gate still opens in five years. We dig and set posts deep enough for the soil conditions in Rowlett, pour adequate concrete, and let it cure before hanging weight. Corners don’t get cut on the part of the job you can’t see.
Sliding Gate Installation
Sliding gate installation is the right call when you need a gate that travels sideways along the fence line instead of swinging into the driveway. Rowlett properties with short driveways, steep approaches, or gates that cross a drainage swale are often better served by a slide gate. The gate rolls on a track and trucks, or cantilevers off a roller frame depending on the ground, and can be automated with an operator mounted to a concrete pad. A manual sliding gate installation in Rowlett typically runs $2,200 to $5,800. With an automatic opener, the range runs $4,000 to $10,500. All pricing is quoted in writing before we begin.
Track or Cantilever
The choice comes down to the ground under the gate. A track system is simpler and less expensive but needs level soil and clean rolling surfaces. A cantilever design floats above the ground and handles gravel driveways or uneven terrain better, which covers a lot of the rural-edge properties around Rowlett.
Operator Placement and Wiring
Slide gate operators pull more current than swing gate units, so the power run and breaker sizing have to be planned carefully. We handle that planning and the install, and we choose operator brands like Viking and DoorKing that have solid track records on daily-use slide gates. The control board gets programmed to your access system, tested for full travel, and adjusted for smooth stops at both ends.
Gate Opener Installation
Gate opener installation means adding the motorized operator to a gate that’s already in place, or pairing a new operator with a gate we’re installing at the same time. In Rowlett, we often install openers on existing manual gates that owners are tired of wrestling, and we upgrade older operators that have failed past reasonable repair. The work includes the operator, control board, safety photo eyes, remote programming, and the low-voltage electrical connection. Installed on an existing gate, a gate opener installation in Rowlett generally runs $1,800 to $4,200, depending on the operator and wiring distance. The quote is fixed before we start, not a vague estimate that grows at the end.
Opener Compatibility
We install openers from Linear, Ghost Controls, DoorKing, and Viking, and we match the unit to the gate’s weight and width, not the other way around. An undersized opener on a heavy iron gate burns out in a couple of seasons. We’ll tell you if the gate itself needs work before an opener gets bolted on.
Programming and Testing
Once the opener is mounted and wired, we program remotes, keypads, and any vehicle sensors, and then run the gate through repeated cycles with obstruction tests. You watch it work before we leave, and you’ll know how to put it in manual mode during a power failure. If something acts up in the first week, you call us and we come back.
Gate Fabrication
Gate fabrication is the building of a gate to the exact dimensions of your opening, rather than modifying a prefabricated panel to fit. It’s what Rowlett homeowners choose when they want a specific look, a non-standard width, or a gate matched to an existing fence that a box-store panel won’t match. We fabricate steel and aluminum gates, both flat-top and arched, in the size your opening actually measures. Fabricated gates in Rowlett run $1,800 to $5,500 for a manual leaf, with automation adding the standard operator and wiring costs. You’ll get shop drawings or a clear spec sheet before you commit, and the price is fixed in writing.
Custom Dimensions and Styles
Standard gate panels come in standard widths, and Rowlett driveways don’t always cooperate. We build to the inch, whether you need a 14-foot double swing or a 23-foot slide leaf. Finish options include powder coat, primer for later painting, or a raw steel that can age naturally if that’s the look you’re after.
Fabrication Timeline
Custom fabrication adds lead time for building and finishing the gate before install day. We’ll give you a straight answer on the schedule when we quote, and we don’t take a deposit without issuing a written work order that states materials, dimensions, finish, and delivery window. No surprises in week three.
See the difference
Before
After
Before
After
Before
AfterBrands We Service
We work on the brand you already have. That’s the starting point for half the calls we get in Rowlett, because a lot of homeowners inherited a gate operator when they bought the property and don’t want a contractor who balks at the name on the lid. Linear operators are common on mid-size residential swing and slide gates here, and we keep the diagnostic knowledge and replacement boards on hand for their current product line. Viking slide gate operators run heavy on ranch and larger residential properties in the Rowlett area, and we’re familiar with their specific limit switch and torque settings.
Ghost Controls makes a popular retrofit opener for existing manual gates, and if that’s your setup, we can install and calibrate it without trying to talk you into replacing the whole gate. DoorKing is the workhorse of community and HOA entrances around Rowlett, and we service and install those systems for property managers who need a gate that cycles hundreds of times a week. Whether you have one of these, a LiftMaster, FAAC, BFT, Elite, Mighty Mule, or something else entirely, we can help. If you’re more concerned with keeping a current gate running than a full install, our gate repair services handle that too.
Signs You Need a Pro Right Now
- The gate sags and drags on the ground. Hinges or posts are failing, and the weight is bending the structure. Left alone, the gate welds crack and the repair doubles in cost.
- The opener strains or stops mid-cycle. That noise is usually a motor working against a misaligned gate or a failing capacitor. Continuing to cycle it burns out components that were salvageable last week.
- Safety edges or photo eyes aren’t working. If the gate doesn’t reverse when something’s in the path, you have a serious entrapment hazard. This isn’t a tune-up issue, it’s a safety failure that needs attention before the next use.
- The gate only opens from one remote or keypad. Control board receivers fail in stages. When access devices start dropping off, the board is usually on its way out and a full failure leaves you locked out or locked in.
- Water is pooling around the operator or post base. Rowlett’s clay soil expands and shifts with moisture, and poor drainage around a post or operator pad is a slow-motion structural problem. The fix is easier now than after the post leans.
Our Process, Step by Step
- 1
Measure and assess. We come to your Rowlett property, measure the opening, check the ground for slope and drainage, and look at the existing power access. You get real numbers, not eyeball estimates.
- 2
Written quote. The scope, materials, operator model if applicable, and price go in writing before you agree to anything. What’s quoted is what you pay, no change orders unless you change the job.
- 3
Site prep. We handle concrete pads for operators, post holes, power runs, and removal of an old gate if one’s coming out. The site is left clean at the end of each day.
- 4
Install and wire. The gate goes up square, the operator gets mounted and connected, and the low-voltage line is run to code. We follow manufacturer torque specs and set safety edges and photo eyes per UL 325.
- 5
Test and hand over. You get a full walkthrough: remote pairing, manual release, keypad codes, and what to listen for. We don’t leave until the gate cycles correctly with obstructions tested, and we’re one call away if anything shifts in the first weeks after install.
How Much Does Gate Installation Cost in Rowlett?
Gate installation in Rowlett spans $1,800 to $10,500 depending on the scope. A basic manual swing gate on existing posts can come in near the bottom of that range, while a custom fabricated slide gate with an automatic operator, safety system, and long power run sits at the top. The main cost drivers are gate type, operator brand and weight rating, length of the low-voltage run, and whether new posts or a concrete pad need to be poured. Steel prices also move, and that shows up in the fabrication line item.
What you want to watch for is an installer who quotes low and then adds “unforeseen conditions” after the job starts. A proper Rowlett estimate includes an allowance for typical soil conditions, post depth, and wiring runs up front. Our free estimate covers the site visit, measurements, and a written price with no obligation. Once you approve it, the number doesn’t change unless you change the job. Call (877) 265-5743 and we’ll come look at your gate, your power, and your driveway and put a real number in front of you.
Our Service Area Near Rowlett
Pinehurst Gate Repair serves Rowlett and the surrounding communities across northeast Dallas County and into Rockwall County. That includes Gate Installation in Garland, Gate Installation in Sachse, plus Rockwall, Heath, Sunnyvale, Wylie, Murphy, Travis Ranch, Saint Paul, Mesquite, and Richardson. If you’re anywhere in that circle, we’ll schedule the site visit around your availability and keep you posted on the timeline from quote to install day.
Serving Rowlett, TX — Our Local Coverage Area
We’re based in the Rowlett area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
Frequently Asked Questions About Gate Installation in Rowlett
Gate installation is the complete process of adding a new gate to your property: measuring the opening, setting posts, hanging the gate leaf, and optionally wiring an automatic opener. In Rowlett and nearby, that covers manual swing gates, automatic slide gates, driveway gates, and openers on existing gates. We also provide Gate Installation in Garland with the same full-scope approach. We handle the entire scope, so you’re not coordinating separate contractors for the gate, the concrete, and the wiring.
A straightforward manual gate install is typically done in one to two days including site prep. An automatic gate with opener, safety edges, and a power run usually takes two to three days depending on the distance from your electrical panel. Custom fabricated gates add a week or two of build time before the install itself. We give you a schedule with the written quote so you know what to expect.
Manual gate installation runs $1,800 to $5,500, and automatic gate installation runs $3,500 to $9,800 depending on gate size, operator brand, and wiring distance. Slide gate systems can reach $10,500 when fabrication and a heavy-duty operator are involved. Every job gets a written, fixed price before work starts. Call (877) 265-5743 for a free estimate specific to your property.
Yes. We install and maintain operators from DoorKing, Linear, Viking, and Ghost Controls, along with LiftMaster, FAAC, BFT, Elite, and Mighty Mule. If your Rowlett property has one of these brands already, we’ll work with it. If you don’t have a preference, we’ll match the operator to the gate’s weight and duty cycle based on what actually fits the job.
For a property with a gate that’s failed entirely, stuck open, or stuck shut, we treat that as an emergency call and prioritize getting out to Rowlett as soon as the schedule allows. A full installation from scratch is a planned job with a quote and scheduling, but a failed gate that needs immediate replacement gets our fastest attention. Call (877) 265-5743 and tell us what’s happening at the property.
We stand behind our installations with a warranty on workmanship, and the gate and opener manufacturers carry their own product warranties on top of that. The specific warranty terms for your job are outlined in the written work order before you sign. If something we installed isn’t right, you call us and we fix it.
Clear the work area of vehicles, decorations, and anything that blocks access to the gate opening and the power source. If you have an HOA in a Rowlett community, check the design guidelines, we can help you navigate that if you’re replacing a gate that has to match. Beyond that, you don’t need to do anything: we handle removal of the old gate, site prep, and clean-up.
Schedule Your Gate Installation Service in Rowlett Today
A gate that opens when you want it to and stays shut when you don’t is the whole job. We’re gate specialists, not generalists, and we work on the brand you already have. Call (877) 265-5743 for a free, no-obligation estimate on your Rowlett gate installation. Ronnie and the team will measure, quote a fixed price, and get your property back to secure.
Written by Ronnie Beshears, Owner at Pinehurst Gate Repair. Serving Rowlett and the surrounding communities with dedicated gate installation and repair.