Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in University Park, TX
Gate installation in University Park almost always means working on a custom estate property, not a builder-grade lot. The homes here are older, the lots are mature, and the ironwork is often original to a 1920s Tudor or a 2000s rebuild. We handle the full scope: new driveway gates, ornamental pedestrian gates, pool enclosure gates, and the operators that move them. If you need a specialist who works on LiftMaster, FAAC, BFT, and Mighty Mule systems, call Pinehurst Gate Repair at (877) 265-5743.
Why University Park Homes Are Different
University Park is fully built out and deed restricted, which changes how gate work happens here. Almost every job we do is retrofit or repair on existing gates attached to high-value single-family homes. The town is landlocked and mature, so you’re not seeing new subdivisions going in. You’re seeing 1920s to 1940s Tudor and Colonial revival ironwork near the SMU edge sitting next to 1990s and 2010s rebuilds with automated operators. On the same block you’ll find original wrought iron that has been hanging for eighty years and a newer LiftMaster operator that failed after a spring storm.
The clay soil is the real wildcard. North Texas expansive clay shrinks and swells with every wet-dry cycle. Gate posts set in that clay heave out of plumb, and a driveway gate that latched cleanly in April will drag by August. Hail season adds its own damage: bent pickets, dented operators, gates knocked off their tracks across 75225. Add in summer heat that cooks control boards and you have a town where gate repair is as much about the ground under the post as it is about the hinge on the gate.
Styles & brands we work with
Our Main University Park Services
Two services dominate the calls we get from University Park homeowners: mechanical gate repair and electric gate repair. One is about iron, hinges, and alignment. The other is about boards, motors, and low-voltage power. Here’s what each involves.
Gate Repair in University Park
A sagging driveway gate, a pedestrian gate that scrapes the walk, a latch that no longer catches. In University Park these are everyday calls because the clay under the posts never stops moving. We address the mechanical side: re-hanging gates, rebuilding hinge points, cutting and welding bent iron, replacing rollers and track hardware. If your gate is dragging, drifting, or simply won’t close square, learn more about our Gate Repair in University Park service.
Electric Gate Repair in University Park
When the operator hums but the gate doesn’t move, or the keypad lights up and nothing happens, the problem is usually in the board, the motor, or the wiring. We diagnose and repair automated systems from LiftMaster, FAAC, BFT, and Mighty Mule, including safety loops, photo eyes, and remote programming. For a gate that works mechanically but won’t open automatically, see our Electric Gate Repair in University Park page.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in University Park
Most University Park gate installations are replacements for ironwork that has outlived its posts, or upgrades from a manual gate to an automated one. The homes are custom, the driveways are wide, and the expectations are high: the new gate has to match the architectural character of a deed-restricted neighborhood. Because the town is landlocked, almost every Gate Installation is a retrofit into existing piers, existing brick columns, or a post line that has to be re-set in shifting clay. New construction is rare here; rebuilding what exists is the norm.
Automatic Gate Installation
Signs you need it
You’re still getting in and out of your car to open the driveway gate, or the gate is manual because the previous owner never automated it.
What it costs in University Park
Automatic gate installation in University Park typically runs $3,000 to $9,000 depending on gate size, operator brand, and whether the existing posts can be reused.
How we do it
We confirm the gate’s weight and swing path, mount a brand-matched operator, run low-voltage power, install safety edges or photo eyes, and program remotes and keypads on site.
Driveway Gate Installation
Signs you need it
The existing driveway gate is rusted through at the hinge posts, the iron is bowed beyond straightening, or a previous storm left it leaning and dragging.
What it costs in University Park
Driveway gate replacement in University Park typically runs $2,500 to $9,000 for a custom single or double swing gate, with ornamental iron on the upper end of that range.
How we do it
We measure the opening, order or fabricate the gate to match your existing ironwork or architectural style, set and reinforce the posts, hang the gate, and align it to swing clean and latch square.
What Gate Installation Costs in University Park
| Item | Typical range in University Park |
|---|---|
| Driveway gate replacement | $2,500 – $9,000 |
| Automatic gate installation | $3,000 – $9,000 |
| Pedestrian gate replacement | $900 – $3,500 |
Do I need a permit to install a gate in University Park?
Most gate replacements that reuse existing posts do not require a permit, but new driveway openings or substantial column work may. University Park is deed restricted and review requirements vary by street. We confirm what applies to your property before work begins.
Can you match the existing ironwork on my University Park home?
Yes, in most cases. Custom ornamental iron can be fabricated to match existing picket profiles, finials, and scrollwork, which matters in a neighborhood where neighboring gates were often built by the same original iron shop. Call (877) 265-5743 to discuss your specific gate.
Brands We Service in University Park
We work on the brand you already have. That includes LiftMaster operators, FAAC hydraulic and electromechanical arms, BFT control boards, and Mighty Mule residential openers. We stock common parts for these systems and can source specialized boards and arms quickly. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in University Park, TX
| Service | Typical range in University Park |
|---|---|
| Gate hinge adjustment or replacement | $185 – $425 |
| Gate sag or alignment repair | $285 – $650 |
| Weld repair to iron gate | $225 – $600 |
| Gate opener circuit board replacement | $375 – $850 |
| Gate opener motor replacement | $475 – $1,200 |
| Safety sensor or photo eye replacement | $195 – $425 |
| Gate operator repair | $285 – $925 |
| Gate track or roller replacement | $275 – $850 |
| Gate lock or latch replacement | $145 – $375 |
| Pedestrian gate replacement | $900 – $3,500 |
| Driveway gate replacement | $2,500 – $9,000 |
| Automatic gate installation | $3,000 – $9,000 |
Two things push prices higher in University Park: the clay. Posts that need to be dug out of heaving soil and re-set in concrete cost more than simple hinge swaps. And custom ironwork matching an original 1930s gate profile costs more than a stock panel. Every price is quoted and agreed in writing before any work starts, so the number you approve is the number you pay.
Neighborhoods We Serve in University Park
We work throughout University Park, including the streets closest to SMU, the older Tudor and Colonial blocks west of Preston Road, and the newer rebuilds scattered across 75225. Service response for most University Park calls is same-day or next-day, depending on parts.
- SMU-area streets
- Preston Road corridor
- Milton Avenue area
- University Boulevard corridor
- 75225 residential blocks
Service Area – Cities Near University Park
Pinehurst Gate Repair handles gate work throughout the Park Cities and the surrounding Dallas area. We regularly run calls in Highland Park, TX and Dallas, TX, and we serve Richardson, TX and Addison, TX for clients who want a gate specialist rather than a general handyman.
Serving University Park, TX — Our Local Coverage Area
We’re based in the University Park area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in University Park
In most cases, yes. We schedule University Park calls same-day or next-day depending on the time of your call and whether a specific part needs to be pulled from stock. Emergency calls for a gate stuck open or a driveway gate that won’t secure take priority.
University Park is deed restricted, and many streets do have architectural review requirements for front-facing driveway gates and operators. We have worked within these rules before and can help you confirm the right replacement or repair approach for your block.
We cover all of University Park and the surrounding Park Cities, plus the broader Dallas area including Highland Park, Richardson, and Addison. If you’re just outside 75225, call (877) 265-5743 and we’ll confirm coverage for your street.
When your gate needs a specialist who knows University Park clay, custom iron, and the brands already on your posts, call Pinehurst Gate Repair at (877) 265-5743. Estimates are free and the price is set before we start.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What University Park Customers Say
"Solar panel on our remote gate wasn't keeping the battery up through the winter. He repositioned it, replaced the battery, and explained the math on why the old placement was never going to work."
— Diego Reyes"Fixed the immediate problem. He was honest that the operator is near end of life and I should budget for a replacement, which I appreciate even if it wasn't what I wanted to hear."
— Marco Rodriguez"We had a hydraulic arm leaking fluid onto the driveway. Replaced, cleaned up the stain as best he could, and it's been dry for months."
— Arjun Reddy